TALK=T;RUN(1,1) 764.htm; object source

 ************************************************************
   Q1 created by VDI menu, Version 3.5, Date 15/03/02
 CPVNAM=VDI;SPPNAM=Core
 ************************************************************
  Echo DISPLAY / USE settings
 TEXT(InForm Settings And Sources For Objects )
TITLE
libref=764
  DISPLAY
  This simulation is similar to that of case 249; but the
  cavity is limited in the third direction by adiabatic
  end walls, at rest. Economy could be affected by noting
  that symmetry must prevail about the NZ/2 plane; but
  this is not done here. The symmetry of the solution
  can therefore be checked..
                _ _ _ _ _ _ _
               /             /|
              /  north wall / |
             /  at H1=1. --/--|--->moving
            /_ _ _ _ _ _ _/   |            y
            |             |   |           ^   ^
            |             |east wall      |  /z
            |    low wall |  /H1=0.       | /
            | adiabatic   | /             |/----> x
            |_ _ _ _ _ _ _|/
 
  The Q1 contains PHOTON USE commands
  ENDDIS
  PHOTON USE
  p
 
 
 
 
 
  red
  vec z 5 sh; msg velocity vectors;pause
  msg u1 contours. Press return for w1
  con u1 z 1 fi;0.001;con u1 z 5 fi;0.001;con u1 z 10 fi;0.001
  gr ou z m;gr ou y m;gr ou x m
  pause
  con off;red
  msg w1 contours, and velocity vectors on the top.
  msg Press return for h1
  con w1 y 1 fi;0.001;con w1 y 5 fi;0.001;con w1 y m fi;0.001
  vec y m
  pause
  vec off;con off;red
  msg enthalpy contours
  con h1 z 1 fi;0.001;con h1 z 5 fi;0.001;con h1 z 10 fi;0.001
  pause
  vec off;con off;red
  msg viscosity contours.
  con visl z 1 fi;0.001;con visl z 5 fi;0.001;con visl z 10 fi;0.001
  pause
  vec off;con off;red
  msg initialised-variable contours.
  con ini z 1 fi;0.001;con ini z 5 fi;0.001;con ini z 10 fi;0.001
  pause
  vec off;con off;red
  msg stored-variable contours.
  con stor z 1 fi;0.001;con stor z 5 fi;0.001;con stor z 10 fi;0.001
  enduse
 ************************************************************
 IRUNN   =       1 ;LIBREF =       764
 ************************************************************
  Group 1. Run Title
 TEXT(InForm Settings And Sources For Objects )
 ************************************************************
  Group 2. Transience
 STEADY  =    T
 ************************************************************
  Groups 3, 4, 5  Grid Information
    * Overall number of cells, RSET(M,NX,NY,NZ,tolerance)
 RSET(M,10,10,10,1.000000E-04)
 ************************************************************
  Group 6. Body-Fitted coordinates
 ************************************************************
  Group 7. Variables: STOREd,SOLVEd,NAMEd
 ONEPHS  =    T
    * Non-default variable names
 NAME(147) =PRPS ; NAME(148) =STOR
 NAME(149) =INI  ; NAME(150) =VISL
    * Solved variables list
 SOLVE(P1  ,U1  ,V1  ,W1  ,H1  )
    * Stored variables list
 STORE(VISL,INI ,STOR,PRPS)
    * Additional solver options
 SOLUTN(P1  ,Y,Y,Y,N,N,N)
 
 ************************************************************
  Group 8. Terms & Devices
 TERMS (P1  ,Y,Y,Y,Y,Y,Y)
 TERMS (H1  ,N,Y,Y,Y,Y,Y)
 ************************************************************
  Group 9. Properties
 RHO1    = 1.000000E+00
 ENUL    = 1.000000E-05
 CP1     = 1.005000E+03
 ENUT    = 0.000000E+00
 PRNDTL(H1  ) =  7.000000E-01
 EMISS   = 0.000000E+00 ;SCATT  = 0.000000E+00
 ************************************************************
  
  Echo InForm settings for Group  9
  INFORM9BEGIN
(PROPERTY VISL is ENUL)
(PROPERTY VISL at SPHERE is 1.e-4)
  INFORM9END
 ************************************************************
  Group 10.Inter-Phase Transfer Processes
 ************************************************************
  Group 11.Initialise Var/Porosity Fields
 FIINIT(PRPS) = -1.000000E+00
 FIINIT(H1)=0.0
   No PATCHes used for this Group
 
 
 INIADD  =    T
 ************************************************************
  Echo InForm settings for Group 11
  INFORM11BEGIN
(INITIAL INI at SPHERE is 1.)
 
  In-Form settings of a 3D variable within the limits of VR object
STORE(STOR)
(STORED STOR at SPHERE is INI+1.)
  
  In-Form settings of a source within the limits of VR object
(SOURCE of H1 at SPHERE is 0.001)
(INITIAL H1 at sphere is 9.9+100.0*XG with if(zg.gt..01+(zwlast/2)))
  INFORM11END
 ************************************************************
  Group 12. Convection and diffusion adjustments
   No PATCHes used for this Group
 ************************************************************
  Group 13. Boundary & Special Sources
   No PATCHes used for this Group
 
 ************************************************************
  Group 14. Downstream Pressure For PARAB
 ************************************************************
  Group 15. Terminate Sweeps
 LSWEEP  =     300
 RESFAC  = 1.000000E-02
 ************************************************************
  Group 16. Terminate Iterations
 LITER (P1  ) =      100 ;LITER (U1  ) =       20
 LITER (V1  ) =       20 ;LITER (W1  ) =       20
 LITER (H1  ) =      100
 ************************************************************
  Group 17. Relaxation
 RELAX(P1  ,LINRLX, 1.000000E-01)
 RELAX(U1  ,FALSDT, 1.000000E-03)
 RELAX(V1  ,FALSDT, 1.000000E-03)
 RELAX(W1  ,FALSDT, 1.000000E-03)
 ************************************************************
  Group 18. Limits
 VARMAX(U1  ) = 1.000000E+06 ;VARMIN(U1  ) =-1.000000E+06
 VARMAX(V1  ) = 1.000000E+06 ;VARMIN(V1  ) =-1.000000E+06
 VARMAX(W1  ) = 1.000000E+06 ;VARMIN(W1  ) =-1.000000E+06
 ************************************************************
  Group 19. EARTH Calls To GROUND Station
 USEGRD  =    T  ;USEGRX =    T
 ASAP    =    T
 CSG3    ='CNGR'
 ************************************************************
  Group 20. Preliminary Printout
 ECHO    =    T
 DISTIL  =    T  ;NULLPR =    F
 NDST    =       0
 DSTTOL  = 1.000000E-02
 EX    (P1  ) =  2.460000E-03 ;EX    (U1  ) =  4.183000E-02
 EX    (V1  ) =  2.383000E-02 ;EX    (W1  ) =  9.1890000E-04
 EX    (H1  ) =  3.033000E-01 ;EX    (PRPS) =  1.160000E+00
 EX    (STOR) =  3.200000E-01 ;EX    (INI ) =  1.600000E-01
 EX    (VISL) =  2.440000E-05
 ************************************************************
  Group 21. Print-out of Variables
 INIFLD  =    T
 ************************************************************
  Group 22. Monitor Print-Out
 IXMON   =       5 ;IYMON  =       9 ;IZMON  =       5
 NPRMON  =  100000
 NPRMNT  =       1
 TSTSWP  =      -1
 ************************************************************
  Group 23.Field Print-Out & Plot Control
 NPRINT  =  100000
 NXPRIN  =       2
 NYPRIN  =       2
 NZPRIN  =       2
 XZPR    =    T
iyprf=5;iyprl=5;nyprin=1;nxprin=1;nzprin=1;izprf=6
 ISWPRF  =       1 ;ISWPRL =  100000
   No PATCHes used for this Group
 ************************************************************
  Group 24. Dumps For Restarts
 NOWIPE  =    T
 
 GVIEW(P,-1.000000E+00,0.000000E+00,0.000000E+00)
 GVIEW(UP,0.000000E+00,1.000000E+00,0.000000E+00)
 
> DOM,    SIZE,        1.000000E-01, 1.000000E-01, 1.000000E-01
> DOM,    MONIT,       4.100000E-02, 9.500000E-02, 4.100000E-02
> DOM,    SCALE,       1.000000E+00, 1.000000E+00, 1.000000E+00
> DOM,    SNAPSIZE,    1.000000E-02
> GRID,   RSET_X_1,    -10, 2.000000E+00
> GRID,   RSET_Y_1,    -10, 2.000000E+00
> GRID,   RSET_Z_1,    -10, 2.000000E+00
 
> OBJ,    NAME,        SOUTH
> OBJ,    POSITION,    0.000000E+00, 0.000000E+00, 0.000000E+00
> OBJ,    SIZE,        1.000000E-01, 0.000000E+00, 1.000000E-01
> OBJ,    CLIPART,     cube13
> OBJ,    ROTATION24,        1
> OBJ,    TYPE,        PLATE
> OBJ,    SURF_ENTH,     0.000000E+00, 0.000000E+00
 
> OBJ,    NAME,        MOVING
> OBJ,    POSITION,    0.000000E+00, 1.000000E-01, 0.000000E+00
> OBJ,    SIZE,        1.000000E-01, 0.000000E+00, 1.000000E-01
> OBJ,    CLIPART,     cube13
> OBJ,    ROTATION24,        1
> OBJ,    GRID,              2
> OBJ,    TYPE,        PLATE
> OBJ,    SURF_ENTH,     0.000000E+00, 1.000000E+00
> OBJ,    VELOCITY,      1.000000E+00, 0.000000E+00, 0.000000E+00
 
> OBJ,    NAME,        WEST
> OBJ,    POSITION,    0.000000E+00, 0.000000E+00, 0.000000E+00
> OBJ,    SIZE,        0.000000E+00, 1.000000E-01, 1.000000E-01
> OBJ,    CLIPART,     cube13
> OBJ,    ROTATION24,        1
> OBJ,    TYPE,        PLATE
> OBJ,    SURF_ENTH,     0.000000E+00, 0.000000E+00
 
> OBJ,    NAME,        EAST
> OBJ,    POSITION,    1.000000E-01, 0.000000E+00, 0.000000E+00
> OBJ,    SIZE,        0.000000E+00, 1.000000E-01, 1.000000E-01
> OBJ,    CLIPART,     cube13
> OBJ,    ROTATION24,        1
> OBJ,    TYPE,        PLATE
> OBJ,    SURF_ENTH,     0.000000E+00, 0.000000E+00
 
> OBJ,    NAME,        HIGH
> OBJ,    POSITION,    0.000000E+00, 0.000000E+00, 1.000000E-01
> OBJ,    SIZE,        1.000000E-01, 1.000000E-01, 0.000000E+00
> OBJ,    CLIPART,     cube11
> OBJ,    ROTATION24,        1
> OBJ,    TYPE,        PLATE
 
> OBJ,    NAME,        LOW
> OBJ,    POSITION,    0.000000E+00, 0.000000E+00, 0.000000E+00
> OBJ,    SIZE,        1.000000E-01, 1.000000E-01, 0.000000E+00
> OBJ,    CLIPART,     cube11
> OBJ,    ROTATION24,        1
> OBJ,    TYPE,        PLATE
 
> OBJ,    NAME,        RELIEF
> OBJ,    POSITION,    3.200000E-02, 3.200000E-02, 0.000000E+00
> OBJ,    SIZE,        1.800000E-02, 1.800000E-02, 2.000000E-03
> OBJ,    CLIPART,     cubet
> OBJ,    ROTATION24,        1
> OBJ,    TYPE,        PRESSURE_RELIEF
> OBJ,    PRES_RELIEF,   1.000000E+00, 0.000000E+00
                             
> OBJ,    NAME,        SPHERE
> OBJ,    POSITION,    0.000000E+00, 0.000000E+00, 0.000000E+00
> OBJ,    SIZE,        1.000000E-01, 1.000000E-01, 1.000000E-01
> OBJ,    CLIPART,     sphere
> OBJ,    ROTATION24,        1
> OBJ,    TYPE,        BLOCKAGE
> OBJ,    MATERIAL,       -1
> OBJ,    USER_HEAT,     0.000000E+00, 0.000000E+00
> OBJ,    SCAL_FIXF,     0.000000E+00
STOP