TALK=T;RUN(1,1)
  PHOTON USE
  p;; 10 1;;;

  set prop off;vi -x
  msg temperature contours and velocity vectors
  msg Note that the y-scale has been magnified 10 times
  con tem1 x 1 fi;0.001
  vec x 1
  ENDUSE
  DISPLAY
  Water flows steadily through a thick-walled aluminium pipe.
  A constant heat flux is prescribed at the outer wall, while
  uniform temperature and velocity profiles are prescribed at
  the pipe inlet.
                      Thick metal pipe wall
                       |
             ^     .-----.-------------------------.
             |   /***.-.***\                         \
             |r /**/     \**\                         \
    Fixed    | |**|--->   |**|                         |->
    mass flux  |**|--->   |**|                         |->
    at pipe     \**\     /**/                         /
    inlet        \***`-'***/                         /
    boundary       `-----'-------------------------'
                             |  z---->
                          Fixed heat flux
                          at outer surface
  ENDDIS
 ************************************************************
  Group 1. Run Title and Number
 ************************************************************
 ************************************************************
 
 TEXT(Water In A Heated Aluminium Pipe        )
 
 ************************************************************
 ************************************************************
 
 IRUNN = 1 ;LIBREF = 0
 ************************************************************
  Group 2. Time dependence
 STEADY = T
 ************************************************************
  Group 3. X-Direction Grid Spacing
 CARTES = F
 NX = 1
 XULAST =1.0E-02
 XFRAC(1)=1.
 ************************************************************
  Group 4. Y-Direction Grid Spacing
 NY = 30
 YVLAST =0.015
   Method of pairs used for grid setting.
 YFRAC(1)=-20. ;YFRAC(2)=0.033333
 YFRAC(3)=10. ;YFRAC(4)=0.016667
 ************************************************************
  Group 5. Z-Direction Grid Spacing
 PARAB = F
 NZ = 20
 ZWLAST =0.3
 ZFRAC(1)=0.05 ;ZFRAC(2)=0.1
 ZFRAC(3)=0.15 ;ZFRAC(4)=0.2
 ZFRAC(5)=0.25 ;ZFRAC(6)=0.3
 ZFRAC(7)=0.35 ;ZFRAC(8)=0.4
 ZFRAC(9)=0.45 ;ZFRAC(10)=0.5
 ZFRAC(11)=0.55 ;ZFRAC(12)=0.6
 ZFRAC(13)=0.65 ;ZFRAC(14)=0.7
 ZFRAC(15)=0.75 ;ZFRAC(16)=0.8
 ZFRAC(17)=0.85 ;ZFRAC(18)=0.9
 ZFRAC(19)=0.95 ;ZFRAC(20)=1.
 ************************************************************
  Group 6. Body-Fitted Coordinates
 ************************************************************
  Group 7. Variables: STOREd,SOLVEd,NAMEd
 ONEPHS = T
 NAME(1)=P1 ;NAME(5)=V1
 NAME(7)=W1 ;NAME(149)=PRPS
 NAME(150)=TEM1
    * Y in SOLUTN argument list denotes:
    * 1-stored 2-solved 3-whole-field
    * 4-point-by-point 5-explicit 6-harmonic averaging 
 SOLUTN(P1,Y,Y,Y,N,N,Y)
 SOLUTN(V1,Y,Y,Y,N,N,Y)
 SOLUTN(W1,Y,Y,Y,N,N,Y)
 SOLUTN(PRPS,Y,N,N,N,N,Y)
 SOLUTN(TEM1,Y,Y,Y,N,N,Y)
 PRPS = 149
 ************************************************************
  Group 8. Terms & Devices
    * Y in TERMS argument list denotes:
    * 1-built-in source 2-convection 3-diffusion 4-transient
    * 5-first phase variable 6-interphase transport         
 TERMS(P1,Y,Y,Y,N,Y,Y)
 TERMS(V1,Y,Y,Y,Y,Y,Y)
 TERMS(W1,Y,Y,Y,Y,Y,Y)
 TERMS(TEM1,N,Y,Y,Y,Y,Y)
 DIFCUT =0.5 ;ZDIFAC =1.
 GALA = F ;ADDDIF = F
 ISOLX = -1 ;ISOLY = -1 ;ISOLZ = -1
 ************************************************************
  Group 9. Properties used if PRPS is not
  stored, and where PRPS = -1.0 if it is!
 RHO1 =1. ;TMP1 =0. ;EL1 =0.
 TSURR =0. ;TEMP0 =0. ;PRESS0 =0.
 DVO1DT =0. ;DRH1DP =0.
 EMISS =0. ;SCATT =0.
 RADIA =0. ;RADIB =0.
 ENUL =1.0E-05 ;ENUT =0.
 PRNDTL(V1)=1. ;PRNDTL(W1)=1.
 PRNDTL(TEM1)=1.
 PRT(V1)=1. ;PRT(W1)=1.
 PRT(TEM1)=1.
 CP1 =1. ;CP2 =1.
 ************************************************************
  Group 10.Inter-Phase Transfer Processes
 ************************************************************
  Group 11.Initial field variables (PHIs)
 FIINIT(P1)=1.0E-10 ;FIINIT(V1)=1.0E-10
 FIINIT(W1)=0.1 ;FIINIT(PRPS)=67.
 FIINIT(TEM1)=1.0E-10
 
 PATCH(METAL ,INIVAL, 1, 1, 21, 30, 1, 20, 1, 1)
 INIT(METAL ,PRPS,0. ,100. )
 INIADD = F
 FSWEEP = 1
 NAMFI =CHAM
 ************************************************************
  Group 12. Patchwise adjustment of terms
  Patches for this group are printed with those
  for Group 13.
  Their names begin either with GP12 or &
 ************************************************************
  Group 13. Boundary & Special Sources
 
 PATCH(IN ,LOW , 1, 1, 1, 20, 1, 1, 1, 1)
 COVAL(IN ,P1 , FIXFLU ,100. )
 COVAL(IN ,W1 ,0. ,0.1 )
 COVAL(IN ,TEM1,0. ,20. )
 
 PATCH(OUTER ,NORTH , 1, 1, 30, 30, 1, 20, 1, 1)
 COVAL(OUTER ,TEM1, FIXFLU ,1000. )
 
 PATCH(EXIT ,HIGH , 1, 1, 1, 20, 20, 20, 1, 1)
 COVAL(EXIT ,P1 , FIXVAL ,0. )
 XCYCLE = F
 EGWF = T
 WALLCO = GRND2
 ************************************************************
  Group 14. Downstream Pressure For PARAB
 ************************************************************
  Group 15. Terminate Sweeps
 LSWEEP = 200 ;ISWC1 = 1
 LITHYD = 1 ;LITFLX = 1 ;LITC = 1 ;ITHC1 = 1
 SELREF = T
 RESFAC =1.0E-05
 ************************************************************
  Group 16. Terminate Iterations
 LITER(P1)=20 ;LITER(V1)=10
 LITER(W1)=10 ;LITER(TEM1)=20
 ENDIT(P1)=1.0E-03 ;ENDIT(V1)=1.0E-03
 ENDIT(W1)=1.0E-03 ;ENDIT(TEM1)=1.0E-03
 ************************************************************
  Group 17. Relaxation
 RELAX(P1,LINRLX,1.)
 RELAX(V1,FALSDT,3.)
 RELAX(W1,FALSDT,3.)
 RELAX(PRPS,LINRLX,1.)
 RELAX(TEM1,FALSDT,1.0E+09)
 OVRRLX =0.
 EXPERT = F ;NNORSL = F
 ************************************************************
  Group 18. Limits
 VARMAX(P1)=1.0E+10 ;VARMIN(P1)=-1.0E+10
 VARMAX(V1)=1.0E+06 ;VARMIN(V1)=-1.0E+06
 VARMAX(W1)=1.0E+06 ;VARMIN(W1)=-1.0E+06
 VARMAX(PRPS)=1.0E+10 ;VARMIN(PRPS)=-1.0E+10
 VARMAX(TEM1)=1.0E+10 ;VARMIN(TEM1)=-1.0E+10
 ************************************************************
  Group 19. Data transmitted to GROUND
 PARSOL = F
 ISG62 = 1
 SPEDAT(SET,GXMONI,PLOTALL,L,T)
 SPEDAT(SET,MATERIAL,67,L,T)
 SPEDAT(SET,MATERIAL,100,L,T)
 ************************************************************
  Group 20. Preliminary Printout
 ************************************************************
  Group 21. Print-out of Variables
 INIFLD = F ;SUBWGR = F
    * Y in OUTPUT argument list denotes:
    * 1-field 2-correction-eq. monitor 3-selective dumping      
    * 4-whole-field residual 5-spot-value table 6-residual table
 OUTPUT(P1,Y,Y,Y,Y,Y,Y)
 OUTPUT(V1,Y,Y,Y,Y,Y,Y)
 OUTPUT(W1,Y,Y,Y,Y,Y,Y)
 OUTPUT(PRPS,Y,N,Y,N,N,N)
 OUTPUT(TEM1,Y,N,Y,Y,Y,Y)
 ************************************************************
  Group 22. Monitor Print-Out
 IXMON = 1 ;IYMON = 19 ;IZMON = 19
 NPRMON = 100000 ;NPRMNT = 1 ;TSTSWP = -1
 UWATCH = T ;USTEER = T
 HIGHLO = F
 ************************************************************
  Group 23.Field Print-Out & Plot Control
 NPRINT = 100000 ;NUMCLS = 5
 NYPRIN = -1 ;IYPRF = 1 ;IYPRL = 10000
 NZPRIN = -1 ;IZPRF = 1 ;IZPRL = 10000
 XZPR = F ;YZPR = F
 IPLTF = 1 ;IPLTL = -1 ;NPLT = -1
 ISWPRF = 1 ;ISWPRL = 100000
 ITABL = 3 ;IPROF = 1
 ABSIZ =0.5 ;ORSIZ =0.4
 NTZPRF = 1 ;NCOLPF = 50
 ICHR = 2 ;NCOLCO = 45 ;NROWCO = 20
 
 PATCH(OUTSIDE ,PROFIL, 1, 1, 30, 30, 1, 20, 1, 1)
 PLOT(OUTSIDE ,TEM1,0. ,0. )
 
 PATCH(WNEARM ,PROFIL, 1, 1, 20, 20, 1, 20, 1, 1)
 PLOT(WNEARM ,W1 ,0. ,0. )
 PLOT(WNEARM ,TEM1,0. ,0. )
 
 PATCH(NEAREND ,PROFIL, 1, 1, 1, 30, 19, 19, 1, 1)
 PLOT(NEAREND ,W1 ,0. ,0. )
 PLOT(NEAREND ,TEM1,0. ,0. )
 ************************************************************
  Group 24. Dumps For Restarts
 SAVE = T ;NOWIPE = F
 NSAVE =CHAM
STOP