TALK=T;RUN(1,1)
  PHOTON USE
  p
  parphi
  .75 .25 1



  msg         LAMINAR 3D BOUNDARY LAYER IN A CORNER
  msg
  msg   Velocity vectors:
  gr ou x 1;gr ou y 1;gr ou z 1
  vec x 1 sh;vec y 1 sh;vec z 1 sh
  msg
  msg Press  to continue
  pause
  vec off;red
  msg        Streamwise velocity contours:
  con w1 x 1 fi;.01
  con w1 y 1 fi;.01
  con w1 z 1 fi;.01
  msg
  msg Press  to continue
  pause
  con off;red
  msg        Contours of x-wise velocity component (u):
  con u1 x 1 fi;.01
  con u1 y 1 fi;.01
  con u1 z 1 fi;.01
  msg            -
  msg Press  to continue
  pause
  con off;red
  msg        Contours of y-wise velocity component (v):
  con v1 x 1 fi;.01
  con v1 y 1 fi;.01
  con v1 z 1 fi;.01
  msg
  msg Press  to continue
  pause
  con off;red
  msg        Temperature distribution:
  con h1 x 1 fi;.01
  con h1 y 1 fi;.01
  con h1 z 1 fi;.01
  msg
  msg Press  to continue
  pause
  con off;red
  msg        Pressure contours:
  con p1 x 1 fi;.01
  con p1 y 1 fi;.01
  con p1 z 1 fi;.01
  msg
  msg Press e to END
  enduse
  DISPLAY
  This run analyses the boundary-layer flow along a corner
  formed by two walls. These walls have a (non-dimensionalised)
  temperature of 0.0, in contrast to the incoming-fluid
  temperature of 1.0.
                        Fixed pressure
                  ________/__
                /|       /  /|\
    Constant  -->|           |\
    mass      /  |        /  |\
    inflow  -->  |           |\__
    rate at /    |      /    |\  \
    temp. --> -->|           |\   \
    =1.0  /_ _ _ |____/______|\    Walls at fixed
         |  --> /    |      /\    /temperature(=0.0)
         |     /           /\____/
         |--> /      |    /\         ^
         |   /           /\         y|
         |  /        | ___           |--->
         | /           /\ \       x /   z
         |/_______|__|/\   \       v
          \\\\\\\\|\\\\     Fixed pressure
                   \
                    Fixed p.
  ENDDIS
 ************************************************************
  Group 1. Run Title and Number
 ************************************************************
 ************************************************************
 
 TEXT(3D Boundary Layer In A Corner           )
 
 ************************************************************
 ************************************************************
 
 IRUNN = 1 ;LIBREF = 14
 ************************************************************
  Group 2. Time dependence
 STEADY = T
 ************************************************************
  Group 3. X-Direction Grid Spacing
 CARTES = T
 NX = 10
 XULAST =0.05
 XFRAC(1)=1.0E-02 ;XFRAC(4)=0.16
 XFRAC(7)=0.49 ;XFRAC(10)=1.
 ************************************************************
  Group 4. Y-Direction Grid Spacing
 NY = 10
 YVLAST =0.05
 YFRAC(1)=1.0E-02 ;YFRAC(4)=0.16
 YFRAC(7)=0.49 ;YFRAC(10)=1.
 ************************************************************
  Group 5. Z-Direction Grid Spacing
 PARAB = T
 NZ = 10
 ZWLAST =0.1
 ZFRAC(10)=1.
 ************************************************************
  Group 6. Body-Fitted Coordinates
 ************************************************************
  Group 7. Variables: STOREd,SOLVEd,NAMEd
 ONEPHS = T
 NAME(1)=P1 ;NAME(3)=U1
 NAME(5)=V1 ;NAME(7)=W1
 NAME(14)=H1
    * Y in SOLUTN argument list denotes:
    * 1-stored 2-solved 3-whole-field
    * 4-point-by-point 5-explicit 6-harmonic averaging 
 SOLUTN(P1,Y,Y,N,N,N,Y)
 SOLUTN(U1,Y,Y,N,N,N,Y)
 SOLUTN(V1,Y,Y,N,N,N,Y)
 SOLUTN(W1,Y,Y,N,N,N,Y)
 SOLUTN(H1,Y,Y,N,N,N,Y)
 ************************************************************
  Group 8. Terms & Devices
    * Y in TERMS argument list denotes:
    * 1-built-in source 2-convection 3-diffusion 4-transient
    * 5-first phase variable 6-interphase transport         
 TERMS(P1,Y,Y,Y,N,Y,Y)
 TERMS(U1,Y,Y,Y,Y,Y,Y)
 TERMS(V1,Y,Y,Y,Y,Y,Y)
 TERMS(W1,Y,Y,Y,Y,Y,Y)
 TERMS(H1,N,Y,Y,Y,Y,Y)
 DIFCUT =0.5 ;ZDIFAC =1.
 GALA = F ;ADDDIF = F
 ISOLX = -1 ;ISOLY = -1 ;ISOLZ = -1
 ************************************************************
  Group 9. Properties used if PRPS is not
  stored, and where PRPS = -1.0 if it is!
 RHO1 =1. ;TMP1 =0.
 EL1 =0.
 TSURR =0. ;TEMP0 =0.
 PRESS0 =0.
 DVO1DT =0. ;DRH1DP =0.
 EMISS =0. ;SCATT =0.
 RADIA =0. ;RADIB =0.
 ENUL =1.0E-05 ;ENUT =0.
 PRNDTL(U1)=1. ;PRNDTL(V1)=1.
 PRNDTL(W1)=1. ;PRNDTL(H1)=0.7
 PRT(U1)=1. ;PRT(V1)=1.
 PRT(W1)=1. ;PRT(H1)=1.
 CP1 =1. ;CP2 =1.
 ************************************************************
  Group 10.Inter-Phase Transfer Processes
 ************************************************************
  Group 11.Initial field variables (PHIs)
 FIINIT(P1)=1.0E-10 ;FIINIT(U1)=1.0E-10
 FIINIT(V1)=1.0E-10 ;FIINIT(W1)=1.0E-10
 FIINIT(H1)=1.0E-10
   No PATCHes yet used for this Group
 INIADD = F
 FSWEEP = 1
 NAMFI =CHAM
 ************************************************************
  Group 12. Patchwise adjustment of terms
  Patches for this group are printed with those
  for Group 13.
  Their names begin either with GP12 or &
 ************************************************************
  Group 13. Boundary & Special Sources
 
 PATCH(UPSTREAM,LOW , 1, 10, 1, 10, 1, 1, 1, 1)
 COVAL(UPSTREAM,P1 , FIXFLU ,1. )
 COVAL(UPSTREAM,U1 ,0. ,0. )
 COVAL(UPSTREAM,V1 ,0. ,0. )
 COVAL(UPSTREAM,W1 ,0. ,1. )
 COVAL(UPSTREAM,H1 ,0. ,1. )
 
 PATCH(SOUTHWAL,SWALL , 1, 10, 1, 1, 1, 10, 1, 1)
 COVAL(SOUTHWAL,U1 ,1. ,0. )
 COVAL(SOUTHWAL,W1 ,1. ,0. )
 COVAL(SOUTHWAL,H1 ,1. ,0. )
 
 PATCH(HIGHY ,CELL , 1, 10, 10, 10, 1, 10, 1, 1)
 COVAL(HIGHY ,P1 ,1. ,0. )
 COVAL(HIGHY ,U1 ,0. ,0. )
 COVAL(HIGHY ,V1 ,0. ,0. )
 COVAL(HIGHY ,W1 ,0. ,1. )
 COVAL(HIGHY ,H1 ,0. ,1. )
 
 PATCH(WESTWALL,WWALL , 1, 1, 1, 10, 1, 10, 1, 1)
 COVAL(WESTWALL,V1 ,1. ,0. )
 COVAL(WESTWALL,W1 ,1. ,0. )
 COVAL(WESTWALL,H1 ,1. ,0. )
 
 PATCH(HIGHX ,CELL , 10, 10, 1, 10, 1, 10, 1, 1)
 COVAL(HIGHX ,P1 ,1. ,0. )
 COVAL(HIGHX ,U1 ,0. ,0. )
 COVAL(HIGHX ,V1 ,0. ,0. )
 COVAL(HIGHX ,W1 ,0. ,1. )
 COVAL(HIGHX ,H1 ,0. ,1. )
 XCYCLE = F
 EGWF = T
 WALLCO = GRND2
 ************************************************************
  Group 14. Downstream Pressure For PARAB
 IPARAB = 1
 AZPH =0. ;PBAR =0.
 ************************************************************
  Group 15. Terminate Sweeps
 LSWEEP = 1 ;ISWC1 = 1
 LITHYD = 10 ;LITFLX = 1 ;LITC = 1 ;ITHC1 = 1
 SELREF = T
 RESFAC =1.0E-02
 ************************************************************
  Group 16. Terminate Iterations
 LITER(P1)=100 ;LITER(U1)=10
 LITER(V1)=10 ;LITER(W1)=100
 LITER(H1)=20
 ENDIT(P1)=1.0E-15 ;ENDIT(U1)=1.0E-03
 ENDIT(V1)=1.0E-03 ;ENDIT(W1)=1.0E-03
 ENDIT(H1)=1.0E-03
 ************************************************************
  Group 17. Relaxation
 RELAX(P1,LINRLX,1.)
 RELAX(U1,FALSDT,1.)
 RELAX(V1,FALSDT,1.)
 RELAX(W1,FALSDT,1.)
 RELAX(H1,FALSDT,1.0E+09)
 OVRRLX =0.
 EXPERT = F ;NNORSL = F
 ************************************************************
  Group 18. Limits
 VARMAX(P1)=1.0E+10 ;VARMIN(P1)=-1.0E+10
 VARMAX(U1)=1.0E+06 ;VARMIN(U1)=-1.0E+06
 VARMAX(V1)=1.0E+06 ;VARMIN(V1)=-1.0E+06
 VARMAX(W1)=1.0E+06 ;VARMIN(W1)=-1.0E+06
 VARMAX(H1)=1.0E+10 ;VARMIN(H1)=-1.0E+10
 ************************************************************
  Group 19. Data transmitted to GROUND
 PARSOL = F
 ISG62 = 1
 ************************************************************
  Group 20. Preliminary Printout
 ************************************************************
  Group 21. Print-out of Variables
 INIFLD = F ;SUBWGR = F
    * Y in OUTPUT argument list denotes:
    * 1-field 2-correction-eq. monitor 3-selective dumping      
    * 4-whole-field residual 5-spot-value table 6-residual table
 OUTPUT(P1,Y,N,Y,Y,Y,Y)
 OUTPUT(U1,Y,N,Y,Y,Y,Y)
 OUTPUT(V1,Y,N,Y,Y,Y,Y)
 OUTPUT(W1,Y,N,Y,Y,Y,Y)
 OUTPUT(H1,Y,N,Y,Y,Y,Y)
 ************************************************************
  Group 22. Monitor Print-Out
 IXMON = 1 ;IYMON = 5 ;IZMON = 1
 NPRMON = 100000 ;NPRMNT = 1 ;TSTSWP = -1
 UWATCH = T ;USTEER = T
 HIGHLO = F
 ************************************************************
  Group 23.Field Print-Out & Plot Control
 NPRINT = 100000 ;NUMCLS = 5
 NXPRIN = 3 ;IXPRF = 1 ;IXPRL = 10000
 NYPRIN = 3 ;IYPRF = 1 ;IYPRL = 10000
 NZPRIN = 10 ;IZPRF = 1 ;IZPRL = 10000
 IPLTF = 1 ;IPLTL = -1 ;NPLT = 1
 ISWPRF = 1 ;ISWPRL = 100000
 ITABL = 3 ;IPROF = 1
 ABSIZ =0.5 ;ORSIZ =0.4
 NTZPRF = 1 ;NCOLPF = 50
 ICHR = 2 ;NCOLCO = 45 ;NROWCO = 20
 
 PATCH(FIXEDZ ,CONTUR, 1, 10, 1, 10, 1, 10, 1, 1)
 PLOT(FIXEDZ ,U1 ,0. ,20. )
 PLOT(FIXEDZ ,V1 ,0. ,20. )
 PLOT(FIXEDZ ,W1 ,0. ,20. )
 PLOT(FIXEDZ ,H1 ,0. ,20. )
 ************************************************************
  Group 24. Dumps For Restarts
 SAVE = T ;NOWIPE = F
 NSAVE =CHAM
 IDISPA = 1 ;IDISPB = 0 ;IDISPC = 0
STOP