TALK=T;RUN(1,1)
  DISPLAY
   This example is similar to that of case 170; but the
   solution procedure is elliptic rather than parabolic.

   Because the flow is nearly parabolic, economy is achieved by
   not using the whole=field solver for scalars and by setting:

   lithyd = 10, so that few sweeps are needed.

   Further economies come from setting:

      ISWC1 = LSWEEP and LITHC1 = LITHYD,

   which entail that the scalars are solved only on the last sweep
   and slab-wise iteration.

   PHOTON commands are supplied.
  ENDDIS
  PHOTON USE
  p
  phi
  4 1

  view -x
  msg picture is enlarged 4 times in y direction
  gr ou x 1
  msg contours of concentration of material with Pr = 10.0
  con c x 1 fi;0.001;pause;con off; red
  msg contours of concentration of material with Pr = 0.1
  con b x 1 fi;0.001;pause;
  msg velocity vectors
  vec x 1
  enduse
 ************************************************************
  Group 1. Run Title and Number
 ************************************************************
 ************************************************************
 
 TEXT(Pipe With Internal Restriction          )
 
 ************************************************************
 ************************************************************
 
 IRUNN = 1 ;LIBREF = 246
 ************************************************************
  Group 2. Time dependence
 STEADY = T
 ************************************************************
  Group 3. X-Direction Grid Spacing
 CARTES = F
 NX = 1
 XULAST =1.0E-02
 XFRAC(1)=1.
 ************************************************************
  Group 4. Y-Direction Grid Spacing
 NY = 20
 YVLAST =1.0E-02
 YFRAC(1)=0.05 ;YFRAC(2)=0.1
 YFRAC(3)=0.15 ;YFRAC(4)=0.2
 YFRAC(5)=0.25 ;YFRAC(6)=0.3
 YFRAC(7)=0.35 ;YFRAC(8)=0.4
 YFRAC(9)=0.45 ;YFRAC(10)=0.5
 YFRAC(11)=0.55 ;YFRAC(12)=0.6
 YFRAC(13)=0.65 ;YFRAC(14)=0.7
 YFRAC(15)=0.75 ;YFRAC(16)=0.8
 YFRAC(17)=0.85 ;YFRAC(18)=0.9
 YFRAC(19)=0.95 ;YFRAC(20)=1.
 ************************************************************
  Group 5. Z-Direction Grid Spacing
 PARAB = F
 NZ = 20
 ZWLAST =0.2
 ZFRAC(1)=0.05 ;ZFRAC(2)=0.1
 ZFRAC(3)=0.15 ;ZFRAC(4)=0.2
 ZFRAC(5)=0.25 ;ZFRAC(6)=0.3
 ZFRAC(7)=0.35 ;ZFRAC(8)=0.4
 ZFRAC(9)=0.45 ;ZFRAC(10)=0.5
 ZFRAC(11)=0.55 ;ZFRAC(12)=0.6
 ZFRAC(13)=0.65 ;ZFRAC(14)=0.7
 ZFRAC(15)=0.75 ;ZFRAC(16)=0.8
 ZFRAC(17)=0.85 ;ZFRAC(18)=0.9
 ZFRAC(19)=0.95 ;ZFRAC(20)=1.
 ************************************************************
  Group 6. Body-Fitted Coordinates
 ************************************************************
  Group 7. Variables: STOREd,SOLVEd,NAMEd
 ONEPHS = T
 NAME(1)=P1 ;NAME(5)=V1
 NAME(7)=W1 ;NAME(14)=H1
 NAME(16)=A ;NAME(17)=B
 NAME(18)=C
    * Y in SOLUTN argument list denotes:
    * 1-stored 2-solved 3-whole-field
    * 4-point-by-point 5-explicit 6-harmonic averaging 
 SOLUTN(P1,Y,Y,N,N,N,N)
 SOLUTN(V1,Y,Y,N,N,N,Y)
 SOLUTN(W1,Y,Y,N,N,N,Y)
 SOLUTN(H1,Y,Y,N,N,N,Y)
 SOLUTN(A,Y,Y,N,N,N,Y)
 SOLUTN(B,Y,Y,N,N,N,Y)
 SOLUTN(C,Y,Y,N,N,N,Y)
 ************************************************************
  Group 8. Terms & Devices
    * Y in TERMS argument list denotes:
    * 1-built-in source 2-convection 3-diffusion 4-transient
    * 5-first phase variable 6-interphase transport         
 TERMS(P1,Y,Y,Y,N,Y,Y)
 TERMS(V1,Y,Y,Y,Y,Y,Y)
 TERMS(W1,Y,Y,Y,Y,Y,Y)
 TERMS(H1,N,Y,Y,Y,Y,Y)
 TERMS(A,N,Y,Y,Y,Y,Y)
 TERMS(B,N,Y,Y,Y,N,Y)
 TERMS(C,N,Y,Y,Y,Y,Y)
 DIFCUT =0.5 ;ZDIFAC =1.
 GALA = F ;ADDDIF = F
 ISOLX = -1 ;ISOLY = -1 ;ISOLZ = -1
 ************************************************************
  Group 9. Properties used if PRPS is not
  stored, and where PRPS = -1.0 if it is!
 RHO1 =1. ;TMP1 =0. ;EL1 =0.
 TSURR =0. ;TEMP0 =0. ;PRESS0 =0.
 DVO1DT =0. ;DRH1DP =0.
 EMISS =0. ;SCATT =0.
 RADIA =0. ;RADIB =0.
 ENUL =1.0E-05 ;ENUT =0.
 PRNDTL(V1)=1. ;PRNDTL(W1)=1.
 PRNDTL(H1)=0.7 ;PRNDTL(A)=1.
 PRNDTL(B)=0.1 ;PRNDTL(C)=10.
 PRT(V1)=1. ;PRT(W1)=1.
 PRT(H1)=1. ;PRT(A)=1.
 PRT(B)=1. ;PRT(C)=1.
 CP1 =1. ;CP2 =1.
 ************************************************************
  Group 10.Inter-Phase Transfer Processes
 ************************************************************
  Group 11.Initial field variables (PHIs)
 FIINIT(P1)=1.0E-10 ;FIINIT(V1)=1.0E-10
 FIINIT(W1)=0.1 ;FIINIT(H1)=1.0E-10
 FIINIT(A)=1.0E-10 ;FIINIT(B)=1.0E-10
 FIINIT(C)=1.0E-10
   No PATCHes yet used for this Group
 INIADD = F
 FSWEEP = 1
 NAMFI =CHAM
 ************************************************************
  Group 12. Patchwise adjustment of terms
  Patches for this group are printed with those
  for Group 13.
  Their names begin either with GP12 or &
 ************************************************************
  Group 13. Boundary & Special Sources
 
 PATCH(WALL ,NWALL , 1, 1, 20, 20, 1, 20, 1, 1)
 COVAL(WALL ,W1 ,1. ,0. )
 COVAL(WALL ,H1 ,1. ,1. )
 COVAL(WALL ,A ,1. ,1. )
 COVAL(WALL ,B ,1. ,1. )
 COVAL(WALL ,C ,1. ,1. )
 
 PATCH(IN ,LOW , 1, 1, 1, 20, 1, 1, 1, 1)
 COVAL(IN ,P1 , FIXFLU ,0.1 )
 COVAL(IN ,V1 ,0. ,0. )
 COVAL(IN ,W1 ,0. ,0.1 )
 COVAL(IN ,H1 ,0. ,0. )
 COVAL(IN ,A ,0. ,0. )
 COVAL(IN ,B ,0. ,0. )
 COVAL(IN ,C ,0. ,0. )
 
 PATCH(OUTLET ,HIGH , 1, 1, 1, 20, 20, 20, 1, 1)
 COVAL(OUTLET ,P1 , FIXVAL ,0. )
 COVAL(OUTLET ,V1 ,0. ,0. )
 COVAL(OUTLET ,W1 ,0. ,0. )
 
 PATCH(RESTRIC ,HIGH , 1, 1, 11, 20, 5, 5, 1, 1)
 COVAL(RESTRIC ,W1 , FIXVAL ,0. )
 XCYCLE = F
 EGWF = T
 WALLCO = GRND2
 ************************************************************
  Group 14. Downstream Pressure For PARAB
 ************************************************************
  Group 15. Terminate Sweeps
 LSWEEP = 10 ;ISWC1 = 6
 LITHYD = 10 ;LITFLX = 1 ;LITC = 1 ;ITHC1 = 1
 SELREF = T
 RESFAC =1.0E-05
 ************************************************************
  Group 16. Terminate Iterations
 LITER(P1)=20 ;LITER(V1)=10
 LITER(W1)=10 ;LITER(H1)=20
 LITER(A)=20 ;LITER(B)=20
 LITER(C)=20
 ENDIT(P1)=1.0E-03 ;ENDIT(V1)=1.0E-03
 ENDIT(W1)=1.0E-03 ;ENDIT(H1)=1.0E-03
 ENDIT(A)=1.0E-03 ;ENDIT(B)=1.0E-03
 ENDIT(C)=1.0E-03
 ************************************************************
  Group 17. Relaxation
 RELAX(P1,LINRLX,1.)
 RELAX(V1,FALSDT,1.)
 RELAX(W1,FALSDT,1.)
 RELAX(H1,FALSDT,1.0E+09)
 RELAX(A,FALSDT,1.0E+09)
 RELAX(B,FALSDT,1.0E+09)
 RELAX(C,FALSDT,1.0E+09)
 OVRRLX =0.
 EXPERT = F ;NNORSL = F
 ************************************************************
  Group 18. Limits
 VARMAX(P1)=1.0E+10 ;VARMIN(P1)=-1.0E+10
 VARMAX(V1)=1.0E+06 ;VARMIN(V1)=-1.0E+06
 VARMAX(W1)=1.0E+06 ;VARMIN(W1)=-1.0E+06
 VARMAX(H1)=1.0E+10 ;VARMIN(H1)=-1.0E+10
 VARMAX(A)=1.0E+10 ;VARMIN(A)=-1.0E+10
 VARMAX(B)=1.0E+10 ;VARMIN(B)=-1.0E+10
 VARMAX(C)=1.0E+10 ;VARMIN(C)=-1.0E+10
 ************************************************************
  Group 19. Data transmitted to GROUND
 PARSOL = F
 ISG62 = 1
 SPEDAT(SET,GXMONI,PLOTALL,L,T)
 ************************************************************
  Group 20. Preliminary Printout
 ************************************************************
  Group 21. Print-out of Variables
 INIFLD = F ;SUBWGR = F
    * Y in OUTPUT argument list denotes:
    * 1-field 2-correction-eq. monitor 3-selective dumping      
    * 4-whole-field residual 5-spot-value table 6-residual table
 OUTPUT(P1,Y,N,Y,Y,Y,Y)
 OUTPUT(V1,Y,N,Y,Y,Y,Y)
 OUTPUT(W1,Y,N,Y,Y,Y,Y)
 OUTPUT(H1,Y,N,Y,Y,Y,Y)
 OUTPUT(A,Y,N,Y,Y,Y,Y)
 OUTPUT(B,Y,N,Y,Y,Y,Y)
 OUTPUT(C,Y,N,Y,Y,Y,Y)
 ************************************************************
  Group 22. Monitor Print-Out
 IXMON = 1 ;IYMON = 19 ;IZMON = 10
 NPRMON = 20 ;NPRMNT = 1 ;TSTSWP = -1
 UWATCH = T ;USTEER = T
 HIGHLO = F
 ************************************************************
  Group 23.Field Print-Out & Plot Control
 NPRINT = 100000 ;NUMCLS = 5
 NYPRIN = 1 ;IYPRF = 9 ;IYPRL = 10000
 NZPRIN = 1 ;IZPRF = 4 ;IZPRL = 8
 XZPR = F ;YZPR = F
 IPLTF = 1 ;IPLTL = -1 ;NPLT = 1
 ISWPRF = 1 ;ISWPRL = 100000
 ITABL = 3 ;IPROF = 1
 ABSIZ =0.5 ;ORSIZ =0.4
 NTZPRF = 1 ;NCOLPF = 50
 ICHR = 2 ;NCOLCO = 45 ;NROWCO = 20
 
 PATCH(EXIT ,PROFIL, 1, 1, 1, 20, 19, 19, 1, 1)
 PLOT(EXIT ,W1 ,0. ,0. )
 PLOT(EXIT ,A ,0. ,0. )
 PLOT(EXIT ,B ,0. ,0. )
 PLOT(EXIT ,C ,0. ,0. )
 
 PATCH(PIPE ,CONTUR, 1, 1, 1, 20, 1, 20, 1, 1)
 PLOT(PIPE ,W1 ,0. ,10. )
 PLOT(PIPE ,H1 ,0. ,10. )
 PLOT(PIPE ,A ,0. ,10. )
 PLOT(PIPE ,B ,0. ,10. )
 PLOT(PIPE ,C ,0. ,10. )
 ************************************************************
  Group 24. Dumps For Restarts
 SAVE = T ;NOWIPE = F
 NSAVE =CHAM
STOP