```
TALK=T;RUN(1,1)
DISPLAY
A cartesian coordinate system is used to encapsulate a
rectangular duct,whose topology is as in the previous case.
ENDDIS
************************************************************
Group 1. Run Title and Number
************************************************************
************************************************************

TEXT(Obstacle,Outlet Restriction And Cart    )

************************************************************
************************************************************

IRUNN = 1 ;LIBREF = 14
************************************************************
Group 2. Time dependence
* Set overall time and no. of steps
TFIRST =0. ;TLAST =0.5
FSTEP = 1 ;LSTEP = 5
TFRAC(1)=0.2 ;TFRAC(2)=0.4
TFRAC(3)=0.6 ;TFRAC(4)=0.8
TFRAC(5)=1.
************************************************************
Group 3. X-Direction Grid Spacing
CARTES = T
NX = 1
XULAST =1.
XFRAC(1)=1.
************************************************************
Group 4. Y-Direction Grid Spacing
NY = 10
YVLAST =1.0E-02
YFRAC(1)=0.1 ;YFRAC(2)=0.2
YFRAC(3)=0.3 ;YFRAC(4)=0.4
YFRAC(5)=0.5 ;YFRAC(6)=0.6
YFRAC(7)=0.7 ;YFRAC(8)=0.8
YFRAC(9)=0.9 ;YFRAC(10)=1.
************************************************************
Group 5. Z-Direction Grid Spacing
PARAB = F
NZ = 10
ZWLAST =0.2
ZFRAC(1)=0.1 ;ZFRAC(2)=0.2
ZFRAC(3)=0.3 ;ZFRAC(4)=0.4
ZFRAC(5)=0.5 ;ZFRAC(6)=0.6
ZFRAC(7)=0.7 ;ZFRAC(8)=0.8
ZFRAC(9)=0.9 ;ZFRAC(10)=1.
************************************************************
Group 6. Body-Fitted Coordinates
************************************************************
Group 7. Variables: STOREd,SOLVEd,NAMEd
ONEPHS = T
NAME(1)=P1 ;NAME(5)=V1
NAME(7)=W1 ;NAME(14)=H1
NAME(16)=A ;NAME(17)=B
NAME(18)=C
* Y in SOLUTN argument list denotes:
* 1-stored 2-solved 3-whole-field
* 4-point-by-point 5-explicit 6-harmonic averaging
SOLUTN(P1,Y,Y,N,N,N,Y)
SOLUTN(V1,Y,Y,N,N,N,Y)
SOLUTN(W1,Y,Y,N,N,N,Y)
SOLUTN(H1,Y,Y,N,N,N,Y)
SOLUTN(A,Y,Y,N,N,N,Y)
SOLUTN(B,Y,Y,N,N,N,Y)
SOLUTN(C,Y,Y,N,N,N,Y)
************************************************************
Group 8. Terms & Devices
* Y in TERMS argument list denotes:
* 1-built-in source 2-convection 3-diffusion 4-transient
* 5-first phase variable 6-interphase transport
TERMS(P1,Y,Y,Y,N,Y,Y)
TERMS(V1,Y,Y,Y,Y,Y,Y)
TERMS(W1,Y,Y,Y,Y,Y,Y)
TERMS(H1,N,Y,Y,Y,Y,Y)
TERMS(A,N,Y,Y,Y,Y,Y)
TERMS(B,N,Y,Y,Y,N,Y)
TERMS(C,N,Y,Y,Y,Y,Y)
DIFCUT =0.5 ;ZDIFAC =1.
GALA = F ;ADDDIF = F
HUNIT =1.
ISOLX = -1 ;ISOLY = -1 ;ISOLZ = -1
************************************************************
Group 9. Properties used if PRPS is not
stored, and where PRPS = -1.0 if it is!
RHO1 =1. ;TMP1 =0.
EL1 =0.
TSURR =0. ;TEMP0 =0.
PRESS0 =0.
DVO1DT =0. ;DRH1DP =0.
EMISS =0. ;SCATT =0.
ENUL =1.0E-05 ;ENUT =0.
PRNDTL(V1)=1. ;PRNDTL(W1)=1.
PRNDTL(H1)=0.7 ;PRNDTL(A)=1.
PRNDTL(B)=0.1 ;PRNDTL(C)=10.
PRT(V1)=1. ;PRT(W1)=1.
PRT(H1)=1. ;PRT(A)=1.
PRT(B)=1. ;PRT(C)=1.
CP1 =1. ;CP2 =1.
************************************************************
Group 10.Inter-Phase Transfer Processes
************************************************************
Group 11.Initial field variables (PHIs)
FIINIT(P1)=1.0E-10 ;FIINIT(V1)=1.0E-10
FIINIT(W1)=0.1 ;FIINIT(H1)=1.0E-10
FIINIT(A)=1.0E-10 ;FIINIT(B)=1.0E-10
FIINIT(C)=1.0E-10
No PATCHes yet used for this Group
FSWEEP = 1
NAMFI =CHAM
************************************************************
Group 12. Patchwise adjustment of terms
Patches for this group are printed with those
for Group 13.
Their names begin either with GP12 or &
************************************************************
Group 13. Boundary & Special Sources

PATCH(DUCTW ,NWALL , 1, 1, 10, 10, 1, 10, 1, 5)
COVAL(DUCTW ,W1 ,1. ,0. )
COVAL(DUCTW ,H1 ,1.428571 ,1. )
COVAL(DUCTW ,A ,1. ,1. )
COVAL(DUCTW ,B ,10. ,1. )
COVAL(DUCTW ,C ,0.1 ,1. )

PATCH(INLET ,LOW , 1, 1, 1, 10, 1, 1, 1, 5)
COVAL(INLET ,P1 , FIXFLU ,0.1 )
COVAL(INLET ,V1 ,0. ,0. )
COVAL(INLET ,W1 ,0. ,0.1 )
COVAL(INLET ,H1 ,0. ,0. )
COVAL(INLET ,A ,0. ,0. )
COVAL(INLET ,B ,0. ,0. )
COVAL(INLET ,C ,0. ,0. )

PATCH(OUTLT ,HIGH , 1, 1, 1, 2, 10, 10, 1, 5)
COVAL(OUTLT ,P1 , FIXVAL ,0. )
COVAL(OUTLT ,V1 ,0. ,0. )
COVAL(OUTLT ,W1 ,0. ,0. )
COVAL(OUTLT ,A ,0. ,0. )
COVAL(OUTLT ,B ,0. ,0. )
COVAL(OUTLT ,C ,0. ,0. )

PATCH(OBSTC ,HIGH , 1, 1, 1, 8, 5, 5, 1, 5)
COVAL(OBSTC ,W1 , FIXVAL ,0. )
XCYCLE = F
EGWF = T
WALLCO = GRND2
************************************************************
Group 14. Downstream Pressure For PARAB
************************************************************
Group 15. Terminate Sweeps
LSWEEP = 20 ;ISWC1 = 1
LITHYD = 1 ;LITFLX = 1 ;LITC = 1 ;ITHC1 = 1
SELREF = T
RESFAC =1.0E-04
************************************************************
Group 16. Terminate Iterations
LITER(P1)=20 ;LITER(V1)=10
LITER(W1)=10 ;LITER(H1)=20
LITER(A)=20 ;LITER(B)=20
LITER(C)=20
ENDIT(P1)=1.0E-03 ;ENDIT(V1)=1.0E-03
ENDIT(W1)=1.0E-03 ;ENDIT(H1)=1.0E-03
ENDIT(A)=1.0E-03 ;ENDIT(B)=1.0E-03
ENDIT(C)=1.0E-03
************************************************************
Group 17. Relaxation
RELAX(P1,LINRLX,1.)
RELAX(V1,FALSDT,1.)
RELAX(W1,FALSDT,1.)
RELAX(H1,FALSDT,1.0E+09)
RELAX(A,FALSDT,1.0E+09)
RELAX(B,FALSDT,1.0E+09)
RELAX(C,FALSDT,1.0E+09)
OVRRLX =0.
EXPERT = F ;NNORSL = F
************************************************************
Group 18. Limits
VARMAX(P1)=1.0E+10 ;VARMIN(P1)=-1.0E+10
VARMAX(V1)=1.0E+06 ;VARMIN(V1)=-1.0E+06
VARMAX(W1)=1.0E+06 ;VARMIN(W1)=-1.0E+06
VARMAX(H1)=1.0E+10 ;VARMIN(H1)=-1.0E+10
VARMAX(A)=1.0E+10 ;VARMIN(A)=-1.0E+10
VARMAX(B)=1.0E+10 ;VARMIN(B)=-1.0E+10
VARMAX(C)=1.0E+10 ;VARMIN(C)=-1.0E+10
************************************************************
Group 19. Data transmitted to GROUND
PARSOL = F
ISG62 = 1
SPEDAT(SET,GXMONI,TRANSIENT,L,F)
************************************************************
Group 20. Preliminary Printout
************************************************************
Group 21. Print-out of Variables
INIFLD = F ;SUBWGR = F
* Y in OUTPUT argument list denotes:
* 1-field 2-correction-eq. monitor 3-selective dumping
* 4-whole-field residual 5-spot-value table 6-residual table
OUTPUT(P1,Y,N,Y,Y,Y,Y)
OUTPUT(V1,Y,N,Y,Y,Y,Y)
OUTPUT(W1,Y,N,Y,Y,Y,Y)
OUTPUT(H1,Y,N,Y,Y,Y,Y)
OUTPUT(A,Y,N,Y,Y,Y,Y)
OUTPUT(B,Y,N,Y,Y,Y,Y)
OUTPUT(C,Y,N,Y,Y,Y,Y)
************************************************************
Group 22. Monitor Print-Out
IXMON = 1 ;IYMON = 19 ;IZMON = 10
NPRMON = 20 ;NPRMNT = 1 ;TSTSWP = 1
UWATCH = T ;USTEER = T
HIGHLO = F
************************************************************
Group 23.Field Print-Out & Plot Control
NPRINT = 100000 ;NUMCLS = 5
NTPRIN = 100000 ;ISTPRF = 1 ;ISTPRL = 100000
NYPRIN = -1 ;IYPRF = 1 ;IYPRL = 10000
NZPRIN = -1 ;IZPRF = 1 ;IZPRL = 10000
XZPR = F ;YZPR = F
IPLTF = 1 ;IPLTL = 30 ;NPLT = -1
ISWPRF = 1 ;ISWPRL = 100000
ITABL = 3 ;IPROF = 1
ABSIZ =0.5 ;ORSIZ =0.4
NTZPRF = 1 ;NCOLPF = 50
ICHR = 2 ;NCOLCO = 45 ;NROWCO = 20

PATCH(TIMEPLOT,CONTUR, 1, 1, 1, 10, 1, 10, 1, 5)
PLOT(TIMEPLOT,W1 ,0. ,10. )
PLOT(TIMEPLOT,H1 ,0. ,10. )
PLOT(TIMEPLOT,A ,0. ,10. )
PLOT(TIMEPLOT,B ,0. ,10. )
PLOT(TIMEPLOT,C ,0. ,10. )
************************************************************
Group 24. Dumps For Restarts
SAVE = T ;NOWIPE = F
NSAVE =CHAM
STOP
```