TALK=T;RUN(1,1)
  DISPLAY

  This case is like 370, but use the y-direction instead of z.

  An InForm-made box object moves uniformly along a duct, the
  cross-section of which it wholly fills.
  The duct contains a porous medium causing resistance to flow
  The ends of the duct are partially open.
  The fluid is compressible.

  Parameters are provided which enable the effects on convergence
  and accuracy to be noted of:
  * box size divided by cell size;
  * time to traverse a cell divided by time step;
  * the compressibility factor;
  * the resistance coefficient;
  * pressure-drop coefficients at the ends of the duct.

  Line-printer profile plots are used for assisting interpretation

  ENDDIS
 ************************************************************
  Group 1. Run Title and Number
 ************************************************************
 ************************************************************
 
 TEXT(MOFOR - In-Form: BOX linear motion X-dir)
 
 ************************************************************
 ************************************************************
 
 IRUNN = 1 ;LIBREF = 0
 ************************************************************
  Group 2. Time dependence
 STEADY = F
    * Set overall time and no. of steps
 TFIRST =0. ;TLAST =1.
 FSTEP = 1 ;LSTEP = 50
 TFRAC(1)=0.02 ;TFRAC(11)=0.22
 TFRAC(21)=0.42 ;TFRAC(31)=0.62
 TFRAC(41)=0.82
 ************************************************************
  Group 3. X-Direction Grid Spacing
 CARTES = T
 NX = 1
 XULAST =2.
 XFRAC(1)=1.
 ************************************************************
  Group 4. Y-Direction Grid Spacing
 NY = 50
 YVLAST =1.
 YFRAC(1)=9.99999E-03 ;YFRAC(2)=0.030204
 YFRAC(3)=0.050408 ;YFRAC(4)=0.070612
 YFRAC(5)=0.090816 ;YFRAC(6)=0.11102
 YFRAC(7)=0.131224 ;YFRAC(8)=0.151429
 YFRAC(9)=0.171633 ;YFRAC(10)=0.191837
 YFRAC(11)=0.212041 ;YFRAC(12)=0.232245
 YFRAC(13)=0.252449 ;YFRAC(14)=0.272653
 YFRAC(15)=0.292857 ;YFRAC(16)=0.313061
 YFRAC(17)=0.333265 ;YFRAC(18)=0.353469
 YFRAC(19)=0.373673 ;YFRAC(20)=0.393878
 YFRAC(21)=0.414082 ;YFRAC(22)=0.434286
 YFRAC(23)=0.45449 ;YFRAC(24)=0.474694
 YFRAC(25)=0.494898 ;YFRAC(26)=0.515102
 YFRAC(27)=0.535306 ;YFRAC(28)=0.55551
 YFRAC(29)=0.575714 ;YFRAC(30)=0.595918
 YFRAC(31)=0.616122 ;YFRAC(32)=0.636327
 YFRAC(33)=0.656531 ;YFRAC(34)=0.676735
 YFRAC(35)=0.696939 ;YFRAC(36)=0.717143
 YFRAC(37)=0.737347 ;YFRAC(38)=0.757551
 YFRAC(39)=0.777755 ;YFRAC(40)=0.797959
 YFRAC(41)=0.818163 ;YFRAC(42)=0.838367
 YFRAC(43)=0.858571 ;YFRAC(44)=0.878776
 YFRAC(45)=0.89898 ;YFRAC(46)=0.919184
 YFRAC(47)=0.939388 ;YFRAC(48)=0.959592
 YFRAC(49)=0.979796 ;YFRAC(50)=1.
 ************************************************************
  Group 5. Z-Direction Grid Spacing
 PARAB = F
 NZ = 1
 ZWLAST =0.1
 ZFRAC(1)=1.
 ************************************************************
  Group 6. Body-Fitted Coordinates
 ************************************************************
  Group 7. Variables: STOREd,SOLVEd,NAMEd
 ONEPHS = T
 NAME(1)=P1 ;NAME(5)=V1
 NAME(16)=C1 ;NAME(143)=FLOY
 NAME(144)=RSV1 ;NAME(145)=ANP1
 NAME(146)=APV1 ;NAME(147)=SOV1
 NAME(148)=RHO1 ;NAME(149)=PRPS
 NAME(150)=OBID
    * Y in SOLUTN argument list denotes:
    * 1-stored 2-solved 3-whole-field
    * 4-point-by-point 5-explicit 6-harmonic averaging 
 SOLUTN(P1,Y,Y,N,N,N,Y)
 SOLUTN(V1,Y,Y,N,N,N,Y)
 SOLUTN(C1,Y,Y,N,N,N,Y)
 SOLUTN(FLOY,Y,N,N,N,N,Y)
 SOLUTN(RSV1,Y,N,N,N,N,Y)
 SOLUTN(ANP1,Y,N,N,N,N,Y)
 SOLUTN(APV1,Y,N,N,N,N,Y)
 SOLUTN(SOV1,Y,N,N,N,N,Y)
 SOLUTN(RHO1,Y,N,N,N,N,Y)
 SOLUTN(PRPS,Y,N,N,N,N,Y)
 SOLUTN(OBID,Y,N,N,N,N,Y)
 DEN1 = 148
 PRPS = 149
 ************************************************************
  Group 8. Terms & Devices
    * Y in TERMS argument list denotes:
    * 1-built-in source 2-convection 3-diffusion 4-transient
    * 5-first phase variable 6-interphase transport         
 TERMS(P1,Y,Y,Y,N,Y,Y)
 TERMS(V1,Y,Y,Y,Y,Y,Y)
 TERMS(C1,N,Y,N,Y,Y,Y)
 DIFCUT =0.5 ;ZDIFAC =1.
 GALA = F ;ADDDIF = F
 ISOLX = -1 ;ISOLY = -1 ;ISOLZ = -1
 DENPCO = T
 ************************************************************
  Group 9. Properties used if PRPS is not
  stored, and where PRPS = -1.0 if it is!
 RHO1 =1. ;TMP1 =0.
 EL1 =0.
 TSURR =0. ;TEMP0 =0.
 PRESS0 =0.
 DVO1DT =0. ;DRH1DP =0.
 EMISS =0. ;SCATT =0.
 RADIA =0. ;RADIB =0.
 ENUL =1.0E-05 ;ENUT =0.
 PRNDTL(V1)=1.
 PRT(V1)=1.
 CP1 =1. ;CP2 =1.
 ************************************************************
  Group 10.Inter-Phase Transfer Processes
 ************************************************************
  Group 11.Initial field variables (PHIs)
 FIINIT(P1)=1.0E-10 ;FIINIT(V1)=1.0E-10
 FIINIT(C1)=1.0E-10 ;FIINIT(FLOY)=1.0E-10
 FIINIT(RSV1)=1.0E-10 ;FIINIT(ANP1)=1.0E-10
 FIINIT(APV1)=1.0E-10 ;FIINIT(SOV1)=1.0E-10
 FIINIT(RHO1)=1.0E-10 ;FIINIT(PRPS)=-1.
 FIINIT(OBID)=1.0E-10
 
 PATCH(INIC1 ,INIVAL, 1, 1, 1, 10, 1, 1, 1, 1)
 INIT(INIC1 ,C1 ,0. ,1. )
 
 PATCH(^OB3 ,INIVAL, 3, 0, 0, 0, 0, 0, 1, 1)
 INIT(^OB3 ,PRPS,0. ,198. )
 INIADD = F
 FSWEEP = 1
 NAMFI =CHAM
 ************************************************************
  Group 12. Patchwise adjustment of terms
  Patches for this group are printed with those
  for Group 13.
  Their names begin either with GP12 or &
 ************************************************************
  Group 13. Boundary & Special Sources
 
 PATCH(RESIST ,VOLUME, 1, 1, 1, 50, 1, 1, 1, 50)
 COVAL(RESIST ,V1 ,10. ,0. )
 
 PATCH(INLET ,CELL , 1, 1, 1, 1, 1, 1, 1, 50)
 COVAL(INLET ,P1 ,1. ,0. )
 COVAL(INLET ,C1 ,0. ,1. )
 
 PATCH(OUTLET ,CELL , 1, 1, 50, 50, 1, 1, 1, 50)
 COVAL(OUTLET ,P1 ,1. ,0. )
 XCYCLE = F
 EGWF = T
 WALLCO = GRND2
 ************************************************************
  Group 14. Downstream Pressure For PARAB
 ************************************************************
  Group 15. Terminate Sweeps
 LSWEEP = 60 ;ISWC1 = 1
 LITHYD = 1 ;LITFLX = 1 ;LITC = 1 ;ITHC1 = 1
 SELREF = T
 RESFAC =1.0E-02
 ************************************************************
  Group 16. Terminate Iterations
 LITER(P1)=20 ;LITER(V1)=10
 LITER(C1)=20
 ENDIT(P1)=1.0E-03 ;ENDIT(V1)=1.0E-03
 ENDIT(C1)=1.0E-03
 ************************************************************
  Group 17. Relaxation
 RELAX(P1,LINRLX,0.1)
 RELAX(V1,FALSDT,1.)
 RELAX(C1,FALSDT,1.0E+09)
 RELAX(FLOY,LINRLX,1.)
 RELAX(RSV1,LINRLX,1.)
 RELAX(ANP1,LINRLX,1.)
 RELAX(APV1,LINRLX,1.)
 RELAX(SOV1,LINRLX,1.)
 RELAX(RHO1,LINRLX,0.1)
 RELAX(PRPS,LINRLX,1.)
 RELAX(OBID,LINRLX,1.)
 OVRRLX =0.
 EXPERT = F ;NNORSL = F
 ************************************************************
  Group 18. Limits
 VARMAX(P1)=1.0E+10 ;VARMIN(P1)=-1.0E+10
 VARMAX(V1)=1.0E+06 ;VARMIN(V1)=-1.0E+06
 VARMAX(C1)=1.0E+10 ;VARMIN(C1)=-1.0E+10
 VARMAX(FLOY)=1.0E+10 ;VARMIN(FLOY)=-1.0E+10
 VARMAX(RSV1)=1.0E+10 ;VARMIN(RSV1)=-1.0E+10
 VARMAX(ANP1)=1.0E+10 ;VARMIN(ANP1)=-1.0E+10
 VARMAX(APV1)=1.0E+10 ;VARMIN(APV1)=-1.0E+10
 VARMAX(SOV1)=1.0E+10 ;VARMIN(SOV1)=-1.0E+10
 VARMAX(RHO1)=1.0E+10 ;VARMIN(RHO1)=-1.0E+10
 VARMAX(PRPS)=1.0E+10 ;VARMIN(PRPS)=-1.0E+10
 VARMAX(OBID)=1.0E+10 ;VARMIN(OBID)=-1.0E+10
 ************************************************************
  Group 19. Data transmitted to GROUND
 CONWIZ = T
 ISG52 = 2
 ISG62 = 0
 SPEDAT(SET,MOFOR,MOFFILE,C,NOTSET)
 SPEDAT(SET,GXMONI,TRANSIENT,L,F)
 SPEDAT(SET,PROPERTY,RHO1,C,=1.0+0.1*P1)
 SPEDAT(SET,PROPERTY,DRH1DP,C,=0.1)
 SPEDAT(SET,MOVOB,BOX,C,=POS(0.0&0.15*YVLAST+1.*TIM&0.0&0&0&0&0&0&$)
 SPEDAT(SET,MOVOB,BOX,C,0&0))
 SPEDAT(SET,STORED,SOV1,C,=SORC(V1)!SOURCS)
 SPEDAT(SET,STORED,APV1,C,=APCO(V1)!EQCOEF)
 SPEDAT(SET,STORED,ANP1,C,=ANCO(P1)!EQCOEF)
 SPEDAT(SET,STORED,RSV1,C,=RESI(V1)!RESIDU)
 SPEDAT(SET,STORED,FLOY,C,=RHO1*V1!ZSLFIN)
 SPEDAT(SET,OBJNAM,^OB3,C,BOX)
 SPEDAT(SET,OBJTYP,^OB3,C,BLOCKAGE)
 SPEDAT(SET,BOX,MATERIAL,R,198.)
 SPEDAT(SET,FACETDAT,NUMOBJ,I,3)
 SPEDAT(SET,MATERIAL,198,L,T)
 ************************************************************
  Group 20. Preliminary Printout
 DISTIL = T ;NULLPR = F
 NDST = 0
 DSTTOL =1.0E-02
 EX(P1)=0.01848 ;EX(V1)=0.1301
 EX(C1)=0.9001 ;EX(FLOY)=0.1274
 EX(RSV1)=5.231E-06 ;EX(ANP1)=0.1452
 EX(APV1)=0.2697 ;EX(SOV1)=2.482E-04
 EX(RHO1)=0.9996 ;EX(PRPS)=0.
 EX(OBID)=0.
 ************************************************************
  Group 21. Print-out of Variables
 INIFLD = F ;SUBWGR = F
    * Y in OUTPUT argument list denotes:
    * 1-field 2-correction-eq. monitor 3-selective dumping      
    * 4-whole-field residual 5-spot-value table 6-residual table
 OUTPUT(P1,Y,N,Y,Y,Y,Y)
 OUTPUT(V1,Y,N,Y,Y,Y,Y)
 OUTPUT(C1,Y,N,Y,Y,Y,Y)
 OUTPUT(FLOY,Y,N,Y,N,N,N)
 OUTPUT(RSV1,Y,N,Y,N,N,N)
 OUTPUT(ANP1,Y,N,Y,N,N,N)
 OUTPUT(APV1,Y,N,Y,N,N,N)
 OUTPUT(SOV1,Y,N,Y,N,N,N)
 OUTPUT(RHO1,Y,N,Y,N,N,N)
 OUTPUT(PRPS,Y,N,Y,N,N,N)
 OUTPUT(OBID,Y,N,Y,N,N,N)
 ************************************************************
  Group 22. Monitor Print-Out
 IXMON = 1 ;IYMON = 14 ;IZMON = 1
 NPRMON = 60 ;NPRMNT = 1 ;TSTSWP = -1
 UWATCH = T ;USTEER = T
 HIGHLO = F
 ************************************************************
  Group 23.Field Print-Out & Plot Control
 NPRINT = 100000 ;NUMCLS = 5
 NTPRIN = 10 ;ISTPRF = 1 ;ISTPRL = 100000
 NYPRIN = 1 ;IYPRF = 1 ;IYPRL = 10000
 IPLTF = 1 ;IPLTL = -1 ;NPLT = -1
 ISWPRF = 1 ;ISWPRL = 100000
 ITABL = 3 ;IPROF = 1
 ABSIZ =0.5 ;ORSIZ =0.4
 NTZPRF = 1 ;NCOLPF = 50
 ICHR = 2 ;NCOLCO = 45 ;NROWCO = 20
 
 PATCH(YPLOT10 ,PROFIL, 1, 1, 1, 49, 1, 1, 10, 10)
 PLOT(YPLOT10 ,P1 ,0. ,0. )
 PLOT(YPLOT10 ,V1 ,0. ,0. )
 PLOT(YPLOT10 ,C1 ,0. ,2. )
 PLOT(YPLOT10 ,FLOY,0. ,0. )
 PLOT(YPLOT10 ,RHO1,0.8 ,1.2 )
 
 PATCH(YPLOT20 ,PROFIL, 1, 1, 1, 49, 1, 1, 20, 20)
 PLOT(YPLOT20 ,P1 ,0. ,0. )
 PLOT(YPLOT20 ,V1 ,0. ,0. )
 PLOT(YPLOT20 ,C1 ,0. ,2. )
 PLOT(YPLOT20 ,FLOY,0. ,0. )
 PLOT(YPLOT20 ,RHO1,0.8 ,1.2 )
 
 PATCH(YPLOT30 ,PROFIL, 1, 1, 1, 49, 1, 1, 30, 30)
 PLOT(YPLOT30 ,P1 ,0. ,0. )
 PLOT(YPLOT30 ,V1 ,0. ,0. )
 PLOT(YPLOT30 ,C1 ,0. ,2. )
 PLOT(YPLOT30 ,FLOY,0. ,0. )
 PLOT(YPLOT30 ,RHO1,0.8 ,1.2 )
 
 PATCH(YPLOT40 ,PROFIL, 1, 1, 1, 49, 1, 1, 40, 40)
 PLOT(YPLOT40 ,P1 ,0. ,0. )
 PLOT(YPLOT40 ,V1 ,0. ,0. )
 PLOT(YPLOT40 ,C1 ,0. ,2. )
 PLOT(YPLOT40 ,FLOY,0. ,0. )
 PLOT(YPLOT40 ,RHO1,0.8 ,1.2 )
 
 PATCH(YPLOT50 ,PROFIL, 1, 1, 1, 49, 1, 1, 50, 50)
 PLOT(YPLOT50 ,P1 ,0. ,0. )
 PLOT(YPLOT50 ,V1 ,0. ,0. )
 PLOT(YPLOT50 ,C1 ,0. ,2. )
 PLOT(YPLOT50 ,FLOY,0. ,0. )
 PLOT(YPLOT50 ,RHO1,0.8 ,1.2 )
 ************************************************************
  Group 24. Dumps For Restarts
 SAVE = T ;NOWIPE = F
 NSAVE =CHAM
STOP