TALK=T;RUN(1,1)
  DISPLAY

  The use is illustrated of the commands for introducing, placing
  and sizing POINT, LINE and PLANE objects, the parameters of which
  are supplied via PIL DO loops.

  It is recommended that the VR-Viewer should be used for displaying
  them visually.

  ENDDIS
 ************************************************************
  Group 1. Run Title and Number
 ************************************************************
 ************************************************************
 
 TEXT(patch-limited objects                   )
 
 ************************************************************
 ************************************************************
 
 IRUNN = 1 ;LIBREF = 0
 ************************************************************
  Group 2. Time dependence
 STEADY = T
 ************************************************************
  Group 3. X-Direction Grid Spacing
 CARTES = T
 NX = 50
 XULAST =1.
 XFRAC(1)=0.02 ;XFRAC(2)=0.04
 XFRAC(3)=0.06 ;XFRAC(4)=0.08
 XFRAC(5)=0.1 ;XFRAC(6)=0.12
 XFRAC(7)=0.14 ;XFRAC(8)=0.16
 XFRAC(9)=0.18 ;XFRAC(10)=0.2
 XFRAC(11)=0.22 ;XFRAC(12)=0.24
 XFRAC(13)=0.26 ;XFRAC(14)=0.28
 XFRAC(15)=0.3 ;XFRAC(16)=0.32
 XFRAC(17)=0.34 ;XFRAC(18)=0.36
 XFRAC(19)=0.38 ;XFRAC(20)=0.4
 XFRAC(21)=0.42 ;XFRAC(22)=0.44
 XFRAC(23)=0.46 ;XFRAC(24)=0.48
 XFRAC(25)=0.5 ;XFRAC(26)=0.52
 XFRAC(27)=0.54 ;XFRAC(28)=0.56
 XFRAC(29)=0.58 ;XFRAC(30)=0.6
 XFRAC(31)=0.62 ;XFRAC(32)=0.64
 XFRAC(33)=0.66 ;XFRAC(34)=0.68
 XFRAC(35)=0.7 ;XFRAC(36)=0.72
 XFRAC(37)=0.74 ;XFRAC(38)=0.76
 XFRAC(39)=0.78 ;XFRAC(40)=0.8
 XFRAC(41)=0.82 ;XFRAC(42)=0.84
 XFRAC(43)=0.86 ;XFRAC(44)=0.88
 XFRAC(45)=0.9 ;XFRAC(46)=0.92
 XFRAC(47)=0.94 ;XFRAC(48)=0.96
 XFRAC(49)=0.98 ;XFRAC(50)=1.
 ************************************************************
  Group 4. Y-Direction Grid Spacing
 NY = 50
 YVLAST =1.
 YFRAC(1)=0.02 ;YFRAC(2)=0.04
 YFRAC(3)=0.06 ;YFRAC(4)=0.08
 YFRAC(5)=0.1 ;YFRAC(6)=0.12
 YFRAC(7)=0.14 ;YFRAC(8)=0.16
 YFRAC(9)=0.18 ;YFRAC(10)=0.2
 YFRAC(11)=0.22 ;YFRAC(12)=0.24
 YFRAC(13)=0.26 ;YFRAC(14)=0.28
 YFRAC(15)=0.3 ;YFRAC(16)=0.32
 YFRAC(17)=0.34 ;YFRAC(18)=0.36
 YFRAC(19)=0.38 ;YFRAC(20)=0.4
 YFRAC(21)=0.42 ;YFRAC(22)=0.44
 YFRAC(23)=0.46 ;YFRAC(24)=0.48
 YFRAC(25)=0.5 ;YFRAC(26)=0.52
 YFRAC(27)=0.54 ;YFRAC(28)=0.56
 YFRAC(29)=0.58 ;YFRAC(30)=0.6
 YFRAC(31)=0.62 ;YFRAC(32)=0.64
 YFRAC(33)=0.66 ;YFRAC(34)=0.68
 YFRAC(35)=0.7 ;YFRAC(36)=0.72
 YFRAC(37)=0.74 ;YFRAC(38)=0.76
 YFRAC(39)=0.78 ;YFRAC(40)=0.8
 YFRAC(41)=0.82 ;YFRAC(42)=0.84
 YFRAC(43)=0.86 ;YFRAC(44)=0.88
 YFRAC(45)=0.9 ;YFRAC(46)=0.92
 YFRAC(47)=0.94 ;YFRAC(48)=0.96
 YFRAC(49)=0.98 ;YFRAC(50)=1.
 ************************************************************
  Group 5. Z-Direction Grid Spacing
 PARAB = F
 NZ = 50
 ZWLAST =1.
 ZFRAC(1)=0.02 ;ZFRAC(2)=0.04
 ZFRAC(3)=0.06 ;ZFRAC(4)=0.08
 ZFRAC(5)=0.1 ;ZFRAC(6)=0.12
 ZFRAC(7)=0.14 ;ZFRAC(8)=0.16
 ZFRAC(9)=0.18 ;ZFRAC(10)=0.2
 ZFRAC(11)=0.22 ;ZFRAC(12)=0.24
 ZFRAC(13)=0.26 ;ZFRAC(14)=0.28
 ZFRAC(15)=0.3 ;ZFRAC(16)=0.32
 ZFRAC(17)=0.34 ;ZFRAC(18)=0.36
 ZFRAC(19)=0.38 ;ZFRAC(20)=0.4
 ZFRAC(21)=0.42 ;ZFRAC(22)=0.44
 ZFRAC(23)=0.46 ;ZFRAC(24)=0.48
 ZFRAC(25)=0.5 ;ZFRAC(26)=0.52
 ZFRAC(27)=0.54 ;ZFRAC(28)=0.56
 ZFRAC(29)=0.58 ;ZFRAC(30)=0.6
 ZFRAC(31)=0.62 ;ZFRAC(32)=0.64
 ZFRAC(33)=0.66 ;ZFRAC(34)=0.68
 ZFRAC(35)=0.7 ;ZFRAC(36)=0.72
 ZFRAC(37)=0.74 ;ZFRAC(38)=0.76
 ZFRAC(39)=0.78 ;ZFRAC(40)=0.8
 ZFRAC(41)=0.82 ;ZFRAC(42)=0.84
 ZFRAC(43)=0.86 ;ZFRAC(44)=0.88
 ZFRAC(45)=0.9 ;ZFRAC(46)=0.92
 ZFRAC(47)=0.94 ;ZFRAC(48)=0.96
 ZFRAC(49)=0.98 ;ZFRAC(50)=1.
 ************************************************************
  Group 6. Body-Fitted Coordinates
 ************************************************************
  Group 7. Variables: STOREd,SOLVEd,NAMEd
 ONEPHS = T
 NAME(145)=HPOR ;NAME(146)=NPOR
 NAME(147)=EPOR ;NAME(149)=MARK
 NAME(150)=PRPS
    * Y in SOLUTN argument list denotes:
    * 1-stored 2-solved 3-whole-field
    * 4-point-by-point 5-explicit 6-harmonic averaging 
 SOLUTN(HPOR,Y,N,N,N,N,Y)
 SOLUTN(NPOR,Y,N,N,N,N,Y)
 SOLUTN(EPOR,Y,N,N,N,N,Y)
 SOLUTN(MARK,Y,N,N,N,N,Y)
 SOLUTN(PRPS,Y,N,N,N,N,Y)
 EPOR = 147 ;HPOR = 145 ;NPOR = 146 ;VPOR = 0
 PRPS = 150
 ************************************************************
  Group 8. Terms & Devices
    * Y in TERMS argument list denotes:
    * 1-built-in source 2-convection 3-diffusion 4-transient
    * 5-first phase variable 6-interphase transport         
 DIFCUT =0.5 ;ZDIFAC =1.
 GALA = F ;ADDDIF = F
 ISOLX = -1 ;ISOLY = -1 ;ISOLZ = -1
 ************************************************************
  Group 9. Properties used if PRPS is not
  stored, and where PRPS = -1.0 if it is!
 RHO1 =1. ;TMP1 =0.
 EL1 =0.
 TSURR =0. ;TEMP0 =0.
 PRESS0 =0.
 DVO1DT =0. ;DRH1DP =0.
 EMISS =0. ;SCATT =0.
 RADIA =0. ;RADIB =0.
 ENUL =1.0E-05 ;ENUT =0.
 CP1 =1. ;CP2 =1.
 ************************************************************
  Group 10.Inter-Phase Transfer Processes
 ************************************************************
  Group 11.Initial field variables (PHIs)
 FIINIT(HPOR)=1. ;FIINIT(NPOR)=1.
 FIINIT(EPOR)=1. ;FIINIT(MARK)=1.0E-10
 FIINIT(PRPS)=0.
 
 PATCH(.PATCH1 ,INIVAL,0. ,1. ,0. ,1. ,1. ,1. ,1. ,1. )
 INIADD = F
 FSWEEP = 1
 NAMFI =CHAM
 ************************************************************
  Group 12. Patchwise adjustment of terms
  Patches for this group are printed with those
  for Group 13.
  Their names begin either with GP12 or &
 ************************************************************
  Group 13. Boundary & Special Sources
 
 PATCH(PATCH1 ,VOLUME, 1, 50, 1, 50, 1, 50, 1, 1)
 XCYCLE = F
 EGWF = T
 WALLCO = GRND2
 ************************************************************
  Group 14. Downstream Pressure For PARAB
 ************************************************************
  Group 15. Terminate Sweeps
 LSWEEP = 1 ;ISWC1 = 1
 LITHYD = 1 ;LITFLX = 1 ;LITC = 1 ;ITHC1 = 1
 SELREF = T
 RESFAC =1.0E-04
 ************************************************************
  Group 16. Terminate Iterations
 ************************************************************
  Group 17. Relaxation
 RELAX(MARK,LINRLX,1.)
 RELAX(PRPS,LINRLX,1.)
 OVRRLX =0.
 EXPERT = F ;NNORSL = F
 ************************************************************
  Group 18. Limits
 VARMAX(HPOR)=1.0E+10 ;VARMIN(HPOR)=-1.0E+10
 VARMAX(NPOR)=1.0E+10 ;VARMIN(NPOR)=-1.0E+10
 VARMAX(EPOR)=1.0E+10 ;VARMIN(EPOR)=-1.0E+10
 VARMAX(MARK)=1.0E+10 ;VARMIN(MARK)=-1.0E+10
 VARMAX(PRPS)=1.0E+10 ;VARMIN(PRPS)=-1.0E+10
 ************************************************************
  Group 19. Data transmitted to GROUND
 PARSOL = F
 ISG50 = 1
 ISG52 = 2
 ISG62 = 1
 SPEDAT(SET,MATERIAL,100,L,T)
 SPEDAT(SET,MATERIAL,0,L,T)
 ************************************************************
  Group 20. Preliminary Printout
 ************************************************************
  Group 21. Print-out of Variables
 INIFLD = F ;SUBWGR = F
    * Y in OUTPUT argument list denotes:
    * 1-field 2-correction-eq. monitor 3-selective dumping      
    * 4-whole-field residual 5-spot-value table 6-residual table
 OUTPUT(HPOR,Y,N,Y,N,N,N)
 OUTPUT(NPOR,Y,N,Y,N,N,N)
 OUTPUT(EPOR,Y,N,Y,N,N,N)
 OUTPUT(MARK,Y,N,Y,N,N,N)
 OUTPUT(PRPS,Y,N,Y,N,N,N)
 ************************************************************
  Group 22. Monitor Print-Out
 IXMON = 1 ;IYMON = 1 ;IZMON = 1
 NPRMON = 100000 ;NPRMNT = 1 ;TSTSWP = -1
 UWATCH = T ;USTEER = T
 HIGHLO = F
 ************************************************************
  Group 23.Field Print-Out & Plot Control
 NPRINT = 100000 ;NUMCLS = 5
 NXPRIN = -1 ;IXPRF = 1 ;IXPRL = 10000
 NYPRIN = -1 ;IYPRF = 1 ;IYPRL = 10000
 NZPRIN = -1 ;IZPRF = 1 ;IZPRL = 10000
 XZPR = F ;YZPR = T
 IPLTF = 1 ;IPLTL = -1 ;NPLT = -1
 ISWPRF = 1 ;ISWPRL = 100000
 ITABL = 3 ;IPROF = 1
 ABSIZ =0.5 ;ORSIZ =0.4
 NTZPRF = 1 ;NCOLPF = 50
 ICHR = 2 ;NCOLCO = 45 ;NROWCO = 20
   No PATCHes yet used for this Group
 ************************************************************
  Group 24. Dumps For Restarts
 SAVE = T ;NOWIPE = F
 NSAVE =CHAM
STOP