TALK=T;RUN(1,1)
  DISPLAY
  The case considered is three-dimensional fully-developed,
  laminar flow and heat transfer of an incompressible, constant-
  property fluid in a rectangular duct of aspect ratio alfa=0.5,
  where alfa=height/width. The calculations are performed for
  a Reynolds number of 100, a Prandtl number of 1.0 and a constant
  temperature boundary condition is applied on all four sides of
  the duct. The solution exploits symmetry by performing the
  calculation over one quadrant of the duct cross section only.
  The flow Reynolds number is based on the hydraulic diameter of
  the duct.
  ENDDIS
 ************************************************************
  Group 1. Run Title and Number
 ************************************************************
 ************************************************************
 
 TEXT(2D Laminar Duct Flow And Heat Trans     )
 
 ************************************************************
 ************************************************************
 
 IRUNN = 1 ;LIBREF = 14
 ************************************************************
  Group 2. Time dependence
 STEADY = T
 ************************************************************
  Group 3. X-Direction Grid Spacing
 CARTES = T
 NX = 15
 XULAST =1.
 XFRAC(1)=0.066667 ;XFRAC(4)=0.266667
 XFRAC(7)=0.466667 ;XFRAC(10)=0.666667
 XFRAC(13)=0.866667
 ************************************************************
  Group 4. Y-Direction Grid Spacing
 NY = 15
 YVLAST =0.5
 YFRAC(1)=0.066667 ;YFRAC(4)=0.266667
 YFRAC(7)=0.466667 ;YFRAC(10)=0.666667
 YFRAC(13)=0.866667
 ************************************************************
  Group 5. Z-Direction Grid Spacing
 PARAB = F
 NZ = 1
 ZWLAST =1.
 ZFRAC(1)=1.
 ************************************************************
  Group 6. Body-Fitted Coordinates
 ************************************************************
  Group 7. Variables: STOREd,SOLVEd,NAMEd
 ONEPHS = T
 NAME(1)=P1 ;NAME(3)=U1
 NAME(5)=V1 ;NAME(7)=W1
 NAME(14)=H1
    * Y in SOLUTN argument list denotes:
    * 1-stored 2-solved 3-whole-field
    * 4-point-by-point 5-explicit 6-harmonic averaging 
 SOLUTN(P1,Y,Y,N,N,N,Y)
 SOLUTN(U1,Y,Y,N,N,N,Y)
 SOLUTN(V1,Y,Y,N,N,N,Y)
 SOLUTN(W1,Y,Y,N,N,N,Y)
 SOLUTN(H1,Y,Y,N,N,N,Y)
 ************************************************************
  Group 8. Terms & Devices
    * Y in TERMS argument list denotes:
    * 1-built-in source 2-convection 3-diffusion 4-transient
    * 5-first phase variable 6-interphase transport         
 TERMS(P1,Y,Y,Y,N,Y,Y)
 TERMS(U1,Y,Y,Y,Y,Y,Y)
 TERMS(V1,Y,Y,Y,Y,Y,Y)
 TERMS(W1,N,Y,Y,Y,Y,Y)
 TERMS(H1,N,Y,Y,Y,Y,Y)
 DIFCUT =0.5 ;ZDIFAC =1.
 GALA = F ;ADDDIF = F
 USOURC = T
 ISOLX = -1 ;ISOLY = -1 ;ISOLZ = -1
 ************************************************************
  Group 9. Properties used if PRPS is not
  stored, and where PRPS = -1.0 if it is!
 RHO1 =1. ;TMP1 =0.
 EL1 =0.
 TSURR =0. ;TEMP0 =0.
 PRESS0 =0.
 DVO1DT =0. ;DRH1DP =0.
 EMISS =0. ;SCATT =0.
 RADIA =0. ;RADIB =0.
 ENUL =0.013333 ;ENUT =0.
 PRNDTL(U1)=1. ;PRNDTL(V1)=1.
 PRNDTL(W1)=1. ;PRNDTL(H1)=1.
 PRT(U1)=1. ;PRT(V1)=1.
 PRT(W1)=1. ;PRT(H1)=1.
 CP1 =1. ;CP2 =1.
 ************************************************************
  Group 10.Inter-Phase Transfer Processes
 ************************************************************
  Group 11.Initial field variables (PHIs)
 FIINIT(P1)=1.0E-10 ;FIINIT(U1)=1.0E-10
 FIINIT(V1)=1.0E-10 ;FIINIT(W1)=1.
 FIINIT(H1)=5.
   No PATCHes yet used for this Group
 INIADD = F
 FSWEEP = 1
 NAMFI =CHAM
 ************************************************************
  Group 12. Patchwise adjustment of terms
  Patches for this group are printed with those
  for Group 13.
  Their names begin either with GP12 or &
 ************************************************************
  Group 13. Boundary & Special Sources
 
 PATCH(GP12CONH,CELL , 1, 15, 1, 15, 1, 1, 1, 1)
 COVAL(GP12CONH,U1 ,0. ,0. )
 COVAL(GP12CONH,V1 ,0. ,0. )
 COVAL(GP12CONH,W1 ,0. ,0. )
 COVAL(GP12CONH,H1 ,0. ,0. )
 
 PATCH(WALLT ,NWALL , 1, 15, 15, 15, 1, 1, 1, 1)
 COVAL(WALLT ,U1 ,1. ,0. )
 COVAL(WALLT ,W1 ,1. ,0. )
 COVAL(WALLT ,H1 ,1. ,10. )
 
 PATCH(WALLS ,EWALL , 15, 15, 1, 15, 1, 1, 1, 1)
 COVAL(WALLS ,V1 ,1. ,0. )
 COVAL(WALLS ,W1 ,1. ,0. )
 COVAL(WALLS ,H1 ,1. ,10. )
 
 PATCH(RELIEF ,CELL , 7, 7, 7, 7, 1, 1, 1, 1)
 COVAL(RELIEF ,P1 ,1. ,0. )
 COVAL(RELIEF ,H1 ,0. , SAME )
 
 PATCH(FDFW1DP ,VOLUME, 1, 15, 1, 15, 1, 1, 1, 1)
 COVAL(FDFW1DP ,W1 ,0.5 , GRND1 )
 
 PATCH(FDFCWT ,PHASEM, 1, 15, 1, 15, 1, 1, 1, 1)
 COVAL(FDFCWT ,H1 ,0.3 ,10. )
 XCYCLE = F
 EGWF = T
 WALLCO = GRND2
 ************************************************************
  Group 14. Downstream Pressure For PARAB
 ************************************************************
  Group 15. Terminate Sweeps
 LSWEEP = 20 ;ISWC1 = 5
 LITHYD = 2 ;LITFLX = 1 ;LITC = 1 ;ITHC1 = 1
 SELREF = T
 RESFAC =1.0E-04
 ************************************************************
  Group 16. Terminate Iterations
 LITER(P1)=20 ;LITER(U1)=10
 LITER(V1)=10 ;LITER(W1)=15
 LITER(H1)=20
 ENDIT(P1)=1.0E-03 ;ENDIT(U1)=1.0E-03
 ENDIT(V1)=1.0E-03 ;ENDIT(W1)=1.0E-03
 ENDIT(H1)=1.0E-03
 ************************************************************
  Group 17. Relaxation
 RELAX(P1,LINRLX,1.)
 RELAX(U1,FALSDT,0.416667)
 RELAX(V1,FALSDT,0.416667)
 RELAX(W1,FALSDT,0.416667)
 RELAX(H1,FALSDT,1.0E+09)
 OVRRLX =0.
 EXPERT = F ;NNORSL = F
 ************************************************************
  Group 18. Limits
 VARMAX(P1)=1.0E+10 ;VARMIN(P1)=-1.0E+10
 VARMAX(U1)=1.0E+06 ;VARMIN(U1)=-1.0E+06
 VARMAX(V1)=1.0E+06 ;VARMIN(V1)=-1.0E+06
 VARMAX(W1)=1.0E+06 ;VARMIN(W1)=-1.0E+06
 VARMAX(H1)=1.0E+10 ;VARMIN(H1)=-1.0E+10
 ************************************************************
  Group 19. Data transmitted to GROUND
 FDFSOL = T
 PARSOL = F
 ISG62 = 1
 ************************************************************
  Group 20. Preliminary Printout
 ************************************************************
  Group 21. Print-out of Variables
 INIFLD = F ;SUBWGR = F
    * Y in OUTPUT argument list denotes:
    * 1-field 2-correction-eq. monitor 3-selective dumping      
    * 4-whole-field residual 5-spot-value table 6-residual table
 OUTPUT(P1,Y,N,Y,Y,Y,Y)
 OUTPUT(U1,Y,N,Y,Y,Y,Y)
 OUTPUT(V1,Y,N,Y,Y,Y,Y)
 OUTPUT(W1,Y,N,Y,Y,Y,Y)
 OUTPUT(H1,Y,N,Y,Y,Y,Y)
 ************************************************************
  Group 22. Monitor Print-Out
 IXMON = 13 ;IYMON = 13 ;IZMON = 1
 NPRMON = 100000 ;NPRMNT = 1 ;TSTSWP = -1
 UWATCH = T ;USTEER = T
 HIGHLO = F
 ************************************************************
  Group 23.Field Print-Out & Plot Control
 NPRINT = 100000 ;NUMCLS = 5
 NXPRIN = 3 ;IXPRF = 1 ;IXPRL = 10000
 NYPRIN = 3 ;IYPRF = 1 ;IYPRL = 10000
 IPLTF = 1 ;IPLTL = -1 ;NPLT = 1
 ISWPRF = 1 ;ISWPRL = 100000
 ITABL = 3 ;IPROF = 1
 ABSIZ =0.5 ;ORSIZ =0.4
 NTZPRF = 1 ;NCOLPF = 50
 ICHR = 2 ;NCOLCO = 45 ;NROWCO = 20
   No PATCHes yet used for this Group
 ************************************************************
  Group 24. Dumps For Restarts
 SAVE = T ;NOWIPE = F
 NSAVE =CHAM
STOP