TALK=T;RUN(1,1)
 ************************************************************
  Group 1. Run Title and Number
 ************************************************************
 ************************************************************
 
 TEXT(Complete Diaphragm rupture              )
 
 ************************************************************
 ************************************************************
 
 IRUNN = 1 ;LIBREF = 0
 ************************************************************
  Group 2. Time dependence
 STEADY = F
    * Set overall time and no. of steps
 TFIRST =0. ;TLAST =9.999871E-04
 FSTEP = 1 ;LSTEP = 100
 TFRAC(1)=1.0E-02 ;TFRAC(2)=0.02
 TFRAC(3)=0.03 ;TFRAC(4)=0.04
 TFRAC(5)=0.05 ;TFRAC(6)=0.06
 TFRAC(7)=0.07 ;TFRAC(8)=0.08
 TFRAC(9)=0.09 ;TFRAC(10)=0.1
 TFRAC(11)=0.11 ;TFRAC(12)=0.12
 TFRAC(13)=0.13 ;TFRAC(14)=0.14
 TFRAC(15)=0.15 ;TFRAC(16)=0.16
 TFRAC(17)=0.17 ;TFRAC(18)=0.18
 TFRAC(19)=0.19 ;TFRAC(20)=0.2
 TFRAC(21)=0.21 ;TFRAC(22)=0.22
 TFRAC(23)=0.23 ;TFRAC(24)=0.24
 TFRAC(25)=0.25 ;TFRAC(26)=0.26
 TFRAC(27)=0.27 ;TFRAC(28)=0.28
 TFRAC(29)=0.29 ;TFRAC(30)=0.3
 TFRAC(31)=0.31 ;TFRAC(32)=0.32
 TFRAC(33)=0.33 ;TFRAC(34)=0.34
 TFRAC(35)=0.35 ;TFRAC(36)=0.36
 TFRAC(37)=0.37 ;TFRAC(38)=0.38
 TFRAC(39)=0.39 ;TFRAC(40)=0.4
 TFRAC(41)=0.41 ;TFRAC(42)=0.42
 TFRAC(43)=0.43 ;TFRAC(44)=0.44
 TFRAC(45)=0.45 ;TFRAC(46)=0.46
 TFRAC(47)=0.47 ;TFRAC(48)=0.48
 TFRAC(49)=0.49 ;TFRAC(50)=0.5
 TFRAC(51)=0.51 ;TFRAC(52)=0.52
 TFRAC(53)=0.53 ;TFRAC(54)=0.54
 TFRAC(55)=0.55 ;TFRAC(56)=0.56
 TFRAC(57)=0.57 ;TFRAC(58)=0.58
 TFRAC(59)=0.59 ;TFRAC(60)=0.6
 TFRAC(61)=0.61 ;TFRAC(62)=0.62
 TFRAC(63)=0.63 ;TFRAC(64)=0.64
 TFRAC(65)=0.65 ;TFRAC(66)=0.66
 TFRAC(67)=0.67 ;TFRAC(68)=0.68
 TFRAC(69)=0.69 ;TFRAC(70)=0.7
 TFRAC(71)=0.71 ;TFRAC(72)=0.72
 TFRAC(73)=0.73 ;TFRAC(74)=0.74
 TFRAC(75)=0.75 ;TFRAC(76)=0.76
 TFRAC(77)=0.77 ;TFRAC(78)=0.78
 TFRAC(79)=0.79 ;TFRAC(80)=0.8
 TFRAC(81)=0.81 ;TFRAC(82)=0.82
 TFRAC(83)=0.83 ;TFRAC(84)=0.84
 TFRAC(85)=0.85 ;TFRAC(86)=0.86
 TFRAC(87)=0.87 ;TFRAC(88)=0.88
 TFRAC(89)=0.89 ;TFRAC(90)=0.9
 TFRAC(91)=0.91 ;TFRAC(92)=0.92
 TFRAC(93)=0.93 ;TFRAC(94)=0.94
 TFRAC(95)=0.95 ;TFRAC(96)=0.96
 TFRAC(97)=0.97 ;TFRAC(98)=0.98
 TFRAC(99)=0.99 ;TFRAC(100)=1.
 ************************************************************
  Group 3. X-Direction Grid Spacing
 CARTES = T
 NX = 40
 XULAST =0.2
 XFRAC(1)=0.025 ;XFRAC(2)=0.05
 XFRAC(3)=0.075 ;XFRAC(4)=0.1
 XFRAC(5)=0.125 ;XFRAC(6)=0.15
 XFRAC(7)=0.175 ;XFRAC(8)=0.2
 XFRAC(9)=0.225 ;XFRAC(10)=0.25
 XFRAC(11)=0.275 ;XFRAC(12)=0.3
 XFRAC(13)=0.325 ;XFRAC(14)=0.35
 XFRAC(15)=0.375 ;XFRAC(16)=0.4
 XFRAC(17)=0.425 ;XFRAC(18)=0.45
 XFRAC(19)=0.475 ;XFRAC(20)=0.5
 XFRAC(21)=0.525 ;XFRAC(22)=0.55
 XFRAC(23)=0.575 ;XFRAC(24)=0.6
 XFRAC(25)=0.625 ;XFRAC(26)=0.65
 XFRAC(27)=0.675 ;XFRAC(28)=0.7
 XFRAC(29)=0.725 ;XFRAC(30)=0.75
 XFRAC(31)=0.775 ;XFRAC(32)=0.8
 XFRAC(33)=0.825 ;XFRAC(34)=0.85
 XFRAC(35)=0.875 ;XFRAC(36)=0.9
 XFRAC(37)=0.925 ;XFRAC(38)=0.95
 XFRAC(39)=0.975 ;XFRAC(40)=1.
 ************************************************************
  Group 4. Y-Direction Grid Spacing
 NY = 20
 YVLAST =0.1
 YFRAC(1)=0.05 ;YFRAC(2)=0.1
 YFRAC(3)=0.15 ;YFRAC(4)=0.2
 YFRAC(5)=0.25 ;YFRAC(6)=0.3
 YFRAC(7)=0.35 ;YFRAC(8)=0.4
 YFRAC(9)=0.45 ;YFRAC(10)=0.5
 YFRAC(11)=0.55 ;YFRAC(12)=0.6
 YFRAC(13)=0.65 ;YFRAC(14)=0.7
 YFRAC(15)=0.75 ;YFRAC(16)=0.8
 YFRAC(17)=0.85 ;YFRAC(18)=0.9
 YFRAC(19)=0.95 ;YFRAC(20)=1.
 ************************************************************
  Group 5. Z-Direction Grid Spacing
 PARAB = F
 NZ = 1
 ZWLAST =0.1
 ZFRAC(1)=1.
 ************************************************************
  Group 6. Body-Fitted Coordinates
 ************************************************************
  Group 7. Variables: STOREd,SOLVEd,NAMEd
 ONEPHS = T
 NAME(1)=P1 ;NAME(3)=U1
 NAME(5)=V1 ;NAME(145)=SPH1
 NAME(146)=TEM1 ;NAME(148)=DEN1
 NAME(150)=PRPS
    * Y in SOLUTN argument list denotes:
    * 1-stored 2-solved 3-whole-field
    * 4-point-by-point 5-explicit 6-harmonic averaging 
 SOLUTN(P1,Y,Y,Y,N,N,Y)
 SOLUTN(U1,Y,Y,N,N,N,Y)
 SOLUTN(V1,Y,Y,N,N,N,Y)
 SOLUTN(SPH1,Y,N,N,N,N,N)
 SOLUTN(TEM1,Y,Y,Y,N,N,Y)
 SOLUTN(DEN1,Y,N,N,N,N,Y)
 SOLUTN(PRPS,Y,N,N,N,N,N)
 DEN1 = 148
 PRPS = 150
 ************************************************************
  Group 8. Terms & Devices
    * Y in TERMS argument list denotes:
    * 1-built-in source 2-convection 3-diffusion 4-transient
    * 5-first phase variable 6-interphase transport         
 TERMS(P1,Y,Y,Y,N,Y,Y)
 TERMS(U1,Y,Y,Y,Y,Y,Y)
 TERMS(V1,Y,Y,Y,Y,Y,Y)
 TERMS(TEM1,Y,Y,Y,Y,Y,Y)
 DIFCUT =0.5 ;ZDIFAC =1.
 GALA = F ;ADDDIF = F
 NEWRH1 = T
 NEWENL = T
 ISOLX = -1 ;ISOLY = -1 ;ISOLZ = -1
 ************************************************************
  Group 9. Properties used if PRPS is not
  stored, and where PRPS = -1.0 if it is!
 RHO1 = GRND5 ;TMP1 =0.
 EL1 =0.
 TSURR =0. ;TEMP0 =273.
 PRESS0 =1.0E+05
 DVO1DT =3.33E-03 ;DRH1DP = GRND5
 RHO1A =0. ;RHO1B =3.4843E-03
 RHO1C =0.71429
 EMISS =0. ;SCATT =0.
 RADIA =0. ;RADIB =0.
 ENUL = GRND2 ;ENUT =0.
 ENULA =-4.94679E-06 ;ENULB =4.58394E-08
 ENULC =8.0974E-11
 PRNDTL(U1)=1. ;PRNDTL(V1)=1.
 PRNDTL(TEM1)=-0.0263
 PRT(U1)=1. ;PRT(V1)=1.
 PRT(TEM1)=1.
 CP1 =1004. ;CP2 =1.
 ************************************************************
  Group 10.Inter-Phase Transfer Processes
 ************************************************************
  Group 11.Initial field variables (PHIs)
 FIINIT(P1)=1.0E-10 ;FIINIT(U1)=1.0E-10
 FIINIT(V1)=1.0E-10 ;FIINIT(SPH1)=1.0E-10
 FIINIT(TEM1)=23. ;FIINIT(DEN1)=1.0E-10
 FIINIT(PRPS)=-1.
 
 PATCH(OB1 ,INIVAL, 1, 20, 1, 20, 1, 1, 1, 1)
 INIT(OB1 ,P1 ,0. ,1.0E+05 )
 INIT(OB1 ,PRPS,0. ,-1. )
 INIADD = F
 FSWEEP = 1
 NAMFI =CHAM
 ************************************************************
  Group 12. Patchwise adjustment of terms
  Patches for this group are printed with those
  for Group 13.
  Their names begin either with GP12 or &
 ************************************************************
  Group 13. Boundary & Special Sources
   No PATCHes yet used for this Group
 XCYCLE = F
 EGWF = T
 WALLCO = GRND2
 ************************************************************
  Group 14. Downstream Pressure For PARAB
 ************************************************************
  Group 15. Terminate Sweeps
 LSWEEP = 50 ;ISWC1 = 1
 LITHYD = 1 ;LITFLX = 1 ;LITC = 1 ;ITHC1 = 1
 SELREF = T
 RESFAC =1.0E-03
 ************************************************************
  Group 16. Terminate Iterations
 LITER(P1)=200 ;LITER(U1)=10
 LITER(V1)=10 ;LITER(TEM1)=20
 ENDIT(P1)=1.0E-03 ;ENDIT(U1)=1.0E-03
 ENDIT(V1)=1.0E-03 ;ENDIT(TEM1)=1.0E-03
 ************************************************************
  Group 17. Relaxation
 RELAX(P1,LINRLX,1.)
 RELAX(U1,FALSDT,1.)
 RELAX(V1,FALSDT,1.)
 RELAX(SPH1,LINRLX,1.)
 RELAX(TEM1,FALSDT,1.0E+09)
 RELAX(DEN1,LINRLX,1.)
 RELAX(PRPS,LINRLX,1.)
 OVRRLX =0.
 EXPERT = F ;NNORSL = F
 ************************************************************
  Group 18. Limits
 VARMAX(P1)=1.0E+10 ;VARMIN(P1)=-1.0E+10
 VARMAX(U1)=1.0E+06 ;VARMIN(U1)=-1.0E+06
 VARMAX(V1)=1.0E+06 ;VARMIN(V1)=-1.0E+06
 VARMAX(SPH1)=1.0E+10 ;VARMIN(SPH1)=-1.0E+10
 VARMAX(TEM1)=3000. ;VARMIN(TEM1)=-204.75
 VARMAX(DEN1)=1.0E+10 ;VARMIN(DEN1)=-1.0E+10
 VARMAX(PRPS)=1.0E+10 ;VARMIN(PRPS)=-1.0E+10
 ************************************************************
  Group 19. Data transmitted to GROUND
 PARSOL = F
 CONWIZ = T
 ISG62 = 1
 SPEDAT(SET,DOMAIN,PHASE_1_MAT,I,2)
 SPEDAT(SET,FACETDAT,NUMOBJ,I,4)
 SPEDAT(SET,OBJNAM,!OB1,C,HIGH-P)
 SPEDAT(SET,OBJTYP,!OB1,C,BLOCKAGE)
 SPEDAT(SET,HIGH-P,MATERIAL,R,-1.)
 SPEDAT(SET,OBJNAM,!OB2,C,PROBE)
 SPEDAT(SET,OBJTYP,!OB2,C,PROBE)
 SPEDAT(SET,TABLE,PROBE_1.CSV,C,=GET(P1[21&11&1]&U1[21&11&1]&V1[21$)
 SPEDAT(SET,TABLE,PROBE_1.CSV,C,&11&1]&TEM1[21&11&1])!HEAD(P1&U1&V$)
 SPEDAT(SET,TABLE,PROBE_1.CSV,C,1&TEM1)!TIME)
 SPEDAT(SET,OBJNAM,!OB3,C,B3)
 SPEDAT(SET,OBJTYP,!OB3,C,PROBE)
 SPEDAT(SET,TABLE,B3_1.CSV,C,=GET(P1[5&11&1]&U1[5&11&1]&V1[5&11&1]$)
 SPEDAT(SET,TABLE,B3_1.CSV,C,&TEM1[5&11&1])!HEAD(P1&U1&V1&TEM1)!TI$)
 SPEDAT(SET,TABLE,B3_1.CSV,C,ME)
 SPEDAT(SET,OBJNAM,!OB4,C,B4)
 SPEDAT(SET,OBJTYP,!OB4,C,PROBE)
 SPEDAT(SET,TABLE,B4_1.CSV,C,=GET(P1[37&11&1]&U1[37&11&1]&V1[37&11$)
 SPEDAT(SET,TABLE,B4_1.CSV,C,&1]&TEM1[37&11&1])!HEAD(P1&U1&V1&TEM1$)
 SPEDAT(SET,TABLE,B4_1.CSV,C,)!TIME)
 ************************************************************
  Group 20. Preliminary Printout
 ************************************************************
  Group 21. Print-out of Variables
 INIFLD = F ;SUBWGR = F
    * Y in OUTPUT argument list denotes:
    * 1-field 2-correction-eq. monitor 3-selective dumping      
    * 4-whole-field residual 5-spot-value table 6-residual table
 OUTPUT(P1,Y,N,Y,Y,Y,Y)
 OUTPUT(U1,Y,N,Y,Y,Y,Y)
 OUTPUT(V1,Y,N,Y,Y,Y,Y)
 OUTPUT(SPH1,N,N,Y,Y,N,N)
 OUTPUT(TEM1,Y,N,Y,Y,Y,Y)
 OUTPUT(DEN1,Y,N,Y,N,N,N)
 OUTPUT(PRPS,Y,N,Y,N,N,N)
 ************************************************************
  Group 22. Monitor Print-Out
 IXMON = 40 ;IYMON = 20 ;IZMON = 1
 NPRMON = 100000 ;NPRMNT = 1 ;TSTSWP = -1
 UWATCH = T ;USTEER = T
 HIGHLO = F
 ************************************************************
  Group 23.Field Print-Out & Plot Control
 NPRINT = 100000 ;NUMCLS = 5
 NTPRIN = 100000 ;ISTPRF = 1 ;ISTPRL = 10000
 NXPRIN = -1 ;IXPRF = 1 ;IXPRL = 10000
 NYPRIN = -1 ;IYPRF = 1 ;IYPRL = 10000
 IPLTF = 1 ;IPLTL = -1 ;NPLT = -1
 ISWPRF = 1 ;ISWPRL = 100000
 ITABL = 3 ;IPROF = 1
 ABSIZ =0.5 ;ORSIZ =0.4
 NTZPRF = 1 ;NCOLPF = 50
 ICHR = 2 ;NCOLCO = 45 ;NROWCO = 20
   No PATCHes yet used for this Group
 ************************************************************
  Group 24. Dumps For Restarts
 SAVE = T ;NOWIPE = F
 NSAVE =CHAM
 IDISPA = 1 ;IDISPB = 0 ;IDISPC = 0
STOP