TALK=T;RUN(1,1)
  PHOTON USE
  p



  up 1 0 0;vi 0.5 1 0.75
  gr ou x 1;gr ou y 1;gr ou z 1
  gr ou x m;gr ou y m;gr ou z m
  gr ou x 1 y 1 2 z 2 2 col 2
  gr ou x 6 y 1 2 z 7 7 col 2
  gr ou z 4 x 1 4 y 1 3 col 6
  gr ou z 6 x 2 5 y 1 3 col 6
  ve y 2 sh

  msg                3D SHELL-AND-TUBE HEAT EXCHANGER
  msg                --------------------------------
  msg                    Velocity 1 phase:
  msg  Press Enter to continue
  pause;vi 0 1 0
  msg                3D SHELL-AND-TUBE HEAT EXCHANGER
  msg                --------------------------------
  msg              Temperature distribution 1 phase:
  con 1sth y 2 sh;in 50
  msg  Press Enter to continue
  pause
  con off;red
  msg                3D SHELL-AND-TUBE HEAT EXCHANGER
  msg                --------------------------------
  msg              Temperature distribution 2 phase:
  con 2ndh y 2 sh;in 50
  msg Press e to END
  ENDUSE
  DISPLAY
    The heat exchanger considered has two baffles within
    the shell and with the tubes arranged if five passes.
    The case is similar to 796 of PHOENICS library one but
    the same resistance to flow exerted by tubes is introduced
    by PLANT settings.
            ============================
    User-defined variables
    T1IN = inlet temperature of shell fluid
    T2IN = inlet temperature of tube fluid
    FLO1 = mass-flow rate of shell fluid
    FLO2 = mass-flow rate of tube fluid
    COEF1 = heat-transfer coefficient on shell-fluid side
    COEF2 = heat-transfer coefficient on tube-fluid side
    COEF12 = overall heat-transfer coefficient from fluid 1
           to fluid 2
    RESCO = flow-resistance coefficient of the tube bank
  ENDDIS
  PLANTBEGIN
    Resistance to flow exerted by tubes, throughout the shell.
PATCH(RESIST,PHASEM,1,NX,1,NY,1,NZ,1,1000)
    CO=RG(2)
COVAL(RESIST,U1,GRND,0.0)
    CO=RG(2)
COVAL(RESIST,V1,GRND,0.0)
    CO=0.5*RG(2)
COVAL(RESIST,W1,GRND,0.0)
  PLANTEND
 ************************************************************
  Group 1. Run Title and Number
 ************************************************************
 ************************************************************
 
 TEXT(In-Form equivalent of PLANT case Z122   )
 
 ************************************************************
 ************************************************************
 
 IRUNN = 1 ;LIBREF = 722
 ************************************************************
  Group 2. Time dependence
 STEADY = T
 ************************************************************
  Group 3. X-Direction Grid Spacing
 CARTES = T
 NX = 5
 XULAST =1.
 XFRAC(1)=0.2 ;XFRAC(2)=0.4
 XFRAC(3)=0.6 ;XFRAC(4)=0.8
 XFRAC(5)=1.
 ************************************************************
  Group 4. Y-Direction Grid Spacing
 NY = 3
 YVLAST =0.5
 YFRAC(1)=0.333333 ;YFRAC(2)=0.666667
 YFRAC(3)=1.
 ************************************************************
  Group 5. Z-Direction Grid Spacing
 PARAB = F
 NZ = 8
 ZWLAST =4.
 ZFRAC(1)=0.125 ;ZFRAC(2)=0.25
 ZFRAC(3)=0.375 ;ZFRAC(4)=0.5
 ZFRAC(5)=0.625 ;ZFRAC(6)=0.75
 ZFRAC(7)=0.875 ;ZFRAC(8)=1.
 ************************************************************
  Group 6. Body-Fitted Coordinates
 ************************************************************
  Group 7. Variables: STOREd,SOLVEd,NAMEd
 ONEPHS = T
 NAME(1)=P1 ;NAME(3)=U1
 NAME(5)=V1 ;NAME(7)=W1
 NAME(14)=1STH ;NAME(15)=2NDH
 NAME(148)=HPOR ;NAME(149)=NPOR
 NAME(150)=EPOR
    * Y in SOLUTN argument list denotes:
    * 1-stored 2-solved 3-whole-field
    * 4-point-by-point 5-explicit 6-harmonic averaging 
 SOLUTN(P1,Y,Y,N,N,N,Y)
 SOLUTN(U1,Y,Y,N,N,N,Y)
 SOLUTN(V1,Y,Y,N,N,N,Y)
 SOLUTN(W1,Y,Y,N,N,N,Y)
 SOLUTN(1STH,Y,Y,N,N,N,Y)
 SOLUTN(2NDH,Y,Y,N,N,N,Y)
 SOLUTN(HPOR,Y,N,N,N,N,Y)
 SOLUTN(NPOR,Y,N,N,N,N,Y)
 SOLUTN(EPOR,Y,N,N,N,N,Y)
 EPOR = 150 ;HPOR = 148 ;NPOR = 149 ;VPOR = 0
 ************************************************************
  Group 8. Terms & Devices
    * Y in TERMS argument list denotes:
    * 1-built-in source 2-convection 3-diffusion 4-transient
    * 5-first phase variable 6-interphase transport         
 TERMS(P1,Y,Y,Y,N,Y,Y)
 TERMS(U1,Y,Y,N,Y,Y,Y)
 TERMS(V1,Y,Y,N,Y,Y,Y)
 TERMS(W1,Y,Y,N,Y,Y,Y)
 TERMS(1STH,N,Y,N,Y,Y,Y)
 TERMS(2NDH,N,N,N,Y,N,N)
 DIFCUT =0.5 ;ZDIFAC =1.
 GALA = F ;ADDDIF = F
 ISOLX = -1 ;ISOLY = -1 ;ISOLZ = -1
 ************************************************************
  Group 9. Properties used if PRPS is not
  stored, and where PRPS = -1.0 if it is!
 RHO1 =1. ;TMP1 =0. ;EL1 =0.
 TSURR =0. ;TEMP0 =0. ;PRESS0 =0.
 DVO1DT =0. ;DRH1DP =0.
 EMISS =0. ;SCATT =0.
 RADIA =0. ;RADIB =0.
 ENUL =1.0E-05 ;ENUT =0.
 CP1 =1. ;CP2 =1.
 ************************************************************
  Group 10.Inter-Phase Transfer Processes
 ************************************************************
  Group 11.Initial field variables (PHIs)
 FIINIT(P1)=1.0E-10 ;FIINIT(U1)=0.
 FIINIT(V1)=0. ;FIINIT(W1)=0.1
 FIINIT(1STH)=1. ;FIINIT(2NDH)=0.
 FIINIT(HPOR)=0.5 ;FIINIT(NPOR)=0.5
 FIINIT(EPOR)=0.5
   No PATCHes yet used for this Group
 INIADD = F
 FSWEEP = 1
 NAMFI =CHAM
 ************************************************************
  Group 12. Patchwise adjustment of terms
  Patches for this group are printed with those
  for Group 13.
  Their names begin either with GP12 or &
 ************************************************************
  Group 13. Boundary & Special Sources
 
 PATCH(INLET1 ,CELL , 1, 1, 2, 3, 2, 2, 1, 1000)
 COVAL(INLET1 ,P1 , FIXFLU ,0.05 )
 COVAL(INLET1 ,1STH,0. ,1. )
 COVAL(INLET1 ,2NDH,0. , SAME )
 
 PATCH(OUTLET1 ,EAST , 5, 5, 2, 3, 7, 7, 1, 1000)
 COVAL(OUTLET1 ,P1 ,1. ,0. )
 
 PATCH(INLET2 ,CELL , 1, 1, 1, 3, 8, 8, 1, 1000)
 COVAL(INLET2 ,2NDH,0.033333 ,0. )
 
 PATCH(BAFFLE1 ,HIGH , 1, 4, 1, 3, 3, 3, 1, 1000)
 COVAL(BAFFLE1 ,W1 , FIXVAL ,0. )
 
 PATCH(BAFFLE2 ,HIGH , 2, 5, 1, 3, 5, 5, 1, 1000)
 COVAL(BAFFLE2 ,W1 , FIXVAL ,0. )
 
 PATCH(INEH1 ,CELL , 1, 1, 1, 3, 1, 7, 1, 1000)
 COVAL(INEH1 ,2NDH,In-Form:source - see Grp 19)
 
 PATCH(INEW1 ,CELL , 2, 2, 1, 3, 1, 1, 1, 1000)
 COVAL(INEW1 ,2NDH,In-Form:source - see Grp 19)
 
 PATCH(INEL1 ,CELL , 2, 2, 1, 3, 2, 8, 1, 1000)
 COVAL(INEL1 ,2NDH,In-Form:source - see Grp 19)
 
 PATCH(INEW2 ,CELL , 3, 3, 1, 3, 8, 8, 1, 1000)
 COVAL(INEW2 ,2NDH,In-Form:source - see Grp 19)
 
 PATCH(INEH2 ,CELL , 3, 3, 1, 3, 1, 7, 1, 1000)
 COVAL(INEH2 ,2NDH,In-Form:source - see Grp 19)
 
 PATCH(INEW3 ,CELL , 4, 4, 1, 3, 1, 1, 1, 1000)
 COVAL(INEW3 ,2NDH,In-Form:source - see Grp 19)
 
 PATCH(INEL2 ,CELL , 4, 4, 1, 3, 2, 8, 1, 1000)
 COVAL(INEL2 ,2NDH,In-Form:source - see Grp 19)
 
 PATCH(INEW4 ,CELL , 5, 5, 1, 3, 8, 8, 1, 1000)
 COVAL(INEW4 ,2NDH,In-Form:source - see Grp 19)
 
 PATCH(INEH3 ,CELL , 5, 5, 1, 3, 1, 7, 1, 1000)
 COVAL(INEH3 ,2NDH,In-Form:source - see Grp 19)
 
 PATCH(INEPLUS ,VOLUME, 1, 5, 1, 3, 1, 8, 1, 1000)
 COVAL(INEPLUS ,1STH,In-Form:source - see Grp 19)
 
 PATCH(INEMINUS,VOLUME, 1, 5, 1, 3, 1, 8, 1, 1000)
 COVAL(INEMINUS,2NDH,In-Form:source - see Grp 19)
 
 PATCH(IRESIST ,PHASEM, 1, 5, 1, 3, 1, 8, 1, 1000)
 COVAL(IRESIST ,U1 ,In-Form:source - see Grp 19)
 COVAL(IRESIST ,V1 ,In-Form:source - see Grp 19)
 COVAL(IRESIST ,W1 ,In-Form:source - see Grp 19)
 XCYCLE = F
 EGWF = T
 WALLCO = GRND2
 ************************************************************
  Group 14. Downstream Pressure For PARAB
 ************************************************************
  Group 15. Terminate Sweeps
 LSWEEP = 200 ;ISWC1 = 1
 LITHYD = 1 ;LITFLX = 1 ;LITC = 1 ;ITHC1 = 1
 SELREF = T
 RESFAC =1.0E-05
 ************************************************************
  Group 16. Terminate Iterations
 LITER(P1)=100 ;LITER(U1)=10
 LITER(V1)=10 ;LITER(W1)=10
 LITER(1STH)=20 ;LITER(2NDH)=20
 ENDIT(P1)=1.0E-03 ;ENDIT(U1)=1.0E-03
 ENDIT(V1)=1.0E-03 ;ENDIT(W1)=1.0E-03
 ENDIT(1STH)=1.0E-03 ;ENDIT(2NDH)=1.0E-03
 ************************************************************
  Group 17. Relaxation
 RELAX(P1,LINRLX,1.)
 RELAX(U1,FALSDT,1.)
 RELAX(V1,FALSDT,1.)
 RELAX(W1,FALSDT,1.)
 RELAX(1STH,FALSDT,1.0E+09)
 RELAX(2NDH,FALSDT,1.)
 OVRRLX =0.
 EXPERT = F ;NNORSL = F
 ************************************************************
  Group 18. Limits
 VARMAX(P1)=1.0E+10 ;VARMIN(P1)=-1.0E+10
 VARMAX(U1)=1.0E+06 ;VARMIN(U1)=-1.0E+06
 VARMAX(V1)=1.0E+06 ;VARMIN(V1)=-1.0E+06
 VARMAX(W1)=1.0E+06 ;VARMIN(W1)=-1.0E+06
 VARMAX(1STH)=1.0E+10 ;VARMIN(1STH)=-1.0E+10
 VARMAX(2NDH)=1.0E+10 ;VARMIN(2NDH)=-1.0E+10
 VARMAX(HPOR)=1.0E+10 ;VARMIN(HPOR)=-1.0E+10
 VARMAX(NPOR)=1.0E+10 ;VARMIN(NPOR)=-1.0E+10
 VARMAX(EPOR)=1.0E+10 ;VARMIN(EPOR)=-1.0E+10
 ************************************************************
  Group 19. Data transmitted to GROUND
 PARSOL = F
 ISG62 = 1
 SPEDAT(SET,SOURCE,2NDH!INEH1,C,=0.033333*(2NDH[&&+1]-2NDH)!LINE)
 SPEDAT(SET,SOURCE,2NDH!INEW1,C,=0.033333*(2NDH[-1]-2NDH)!LINE)
 SPEDAT(SET,SOURCE,2NDH!INEL1,C,=0.033333*(2NDH[&&-1]-2NDH)!LINE)
 SPEDAT(SET,SOURCE,2NDH!INEW2,C,=0.033333*(2NDH[-1]-2NDH)!LINE)
 SPEDAT(SET,SOURCE,2NDH!INEH2,C,=0.033333*(2NDH[&&+1]-2NDH)!LINE)
 SPEDAT(SET,SOURCE,2NDH!INEW3,C,=0.033333*(2NDH[-1]-2NDH)!LINE)
 SPEDAT(SET,SOURCE,2NDH!INEL2,C,=0.033333*(2NDH[&&-1]-2NDH)!LINE)
 SPEDAT(SET,SOURCE,2NDH!INEW4,C,=0.033333*(2NDH[-1]-2NDH)!LINE)
 SPEDAT(SET,SOURCE,2NDH!INEH3,C,=0.033333*(2NDH[&&+1]-2NDH)!LINE)
 SPEDAT(SET,SOURCE,1STH!INEPLUS,C,=0.08*(2NDH-1STH)!LINE)
 SPEDAT(SET,SOURCE,2NDH!INEMINUS,C,=0.08*(1STH-2NDH)!LINE)
 SPEDAT(SET,SOURCE,U1!IRESIST,C,=100.*(0-U1)!LINE)
 SPEDAT(SET,SOURCE,V1!IRESIST,C,=100.*(0-V1)!LINE)
 SPEDAT(SET,SOURCE,W1!IRESIST,C,=0.5*100.*(0-W1)!LINE)
 SPEDAT(SET,GXMONI,PLOTALL,L,T)
 RG( 1) =0.08
 RG( 2) =100.
 ************************************************************
  Group 20. Preliminary Printout
 DISTIL = T ;NULLPR = F
 NDST = 0
 DSTTOL =1.0E-02
 EX(P1)=119.099998 ;EX(U1)=0.3
 EX(V1)=0.02262 ;EX(W1)=0.3339
 EX(1STH)=0.6411 ;EX(2NDH)=0.327
 EX(HPOR)=0.5 ;EX(NPOR)=0.5
 EX(EPOR)=0.5
 ************************************************************
  Group 21. Print-out of Variables
 INIFLD = F ;SUBWGR = F
    * Y in OUTPUT argument list denotes:
    * 1-field 2-correction-eq. monitor 3-selective dumping      
    * 4-whole-field residual 5-spot-value table 6-residual table
 OUTPUT(P1,Y,N,Y,Y,Y,Y)
 OUTPUT(U1,Y,N,Y,Y,Y,Y)
 OUTPUT(V1,Y,N,Y,Y,Y,Y)
 OUTPUT(W1,Y,N,Y,Y,Y,Y)
 OUTPUT(1STH,N,N,Y,Y,Y,Y)
 OUTPUT(2NDH,N,N,Y,Y,Y,Y)
 OUTPUT(HPOR,N,N,N,N,N,N)
 OUTPUT(NPOR,N,N,N,N,N,N)
 OUTPUT(EPOR,N,N,N,N,N,N)
 ************************************************************
  Group 22. Monitor Print-Out
 IXMON = 5 ;IYMON = 5 ;IZMON = 1
 NPRMON = 100000 ;NPRMNT = 1 ;TSTSWP = -1
 UWATCH = T ;USTEER = T
 HIGHLO = F
 ************************************************************
  Group 23.Field Print-Out & Plot Control
 NPRINT = 100000 ;NUMCLS = 5
 NXPRIN = -1 ;IXPRF = 1 ;IXPRL = 10000
 NYPRIN = -1 ;IYPRF = 1 ;IYPRL = 10000
 NZPRIN = -1 ;IZPRF = 1 ;IZPRL = 10000
 XZPR = T ;YZPR = F
 IPLTF = 1 ;IPLTL = 50 ;NPLT = 1
 ISWPRF = 1 ;ISWPRL = 100000
 ITABL = 3 ;IPROF = 1
 ABSIZ =0.5 ;ORSIZ =0.4
 NTZPRF = 1 ;NCOLPF = 50
 ICHR = 2 ;NCOLCO = 45 ;NROWCO = 20
 
 PATCH(PASS1 ,PROFIL, 1, 1, 2, 2, 1, 8, 1, 1000)
 PLOT(PASS1 ,1STH,0. ,1. )
 PLOT(PASS1 ,2NDH,0. ,1. )
 
 PATCH(PASS2 ,PROFIL, 2, 2, 2, 2, 1, 8, 1, 1000)
 PLOT(PASS2 ,1STH,0. ,1. )
 PLOT(PASS2 ,2NDH,0. ,1. )
 
 PATCH(PASS3 ,PROFIL, 3, 3, 2, 2, 1, 8, 1, 1000)
 PLOT(PASS3 ,1STH,0. ,1. )
 PLOT(PASS3 ,2NDH,0. ,1. )
 
 PATCH(PASS4 ,PROFIL, 4, 4, 2, 2, 1, 8, 1, 1000)
 PLOT(PASS4 ,1STH,0. ,1. )
 PLOT(PASS4 ,2NDH,0. ,1. )
 
 PATCH(PASS5 ,PROFIL, 5, 5, 2, 2, 1, 8, 1, 1000)
 PLOT(PASS5 ,1STH,0. ,1. )
 PLOT(PASS5 ,2NDH,0. ,1. )
 
 PATCH(TABMAP ,CONTUR, 1, 5, 1, 3, 4, 4, 1, 1000)
 PLOT(TABMAP ,1STH,0. ,10. )
 PLOT(TABMAP ,2NDH,0. ,10. )
 
 PATCH(TABYEQ3 ,CONTUR, 1, 5, 3, 3, 1, 8, 1, 1000)
 PLOT(TABYEQ3 ,P1 ,0. ,10. )
 PLOT(TABYEQ3 ,1STH,0. ,10. )
 PLOT(TABYEQ3 ,2NDH,0. ,10. )
 ************************************************************
  Group 24. Dumps For Restarts
 SAVE = T ;NOWIPE = F
 NSAVE =CHAM
STOP