TALK=T;RUN(1,1)
  PHOTON USE
  P



  gr ce ou x 1;set lhand
  vec x 1 sh
  msg                Velocity distribution
  msg  Press Enter to continue
  pause
  vec off;red
  con H1 x 1 fil;0.001
  msg                Temperature distribution
  msg  Press Enter to continue
  pause
  con off;red
  con KE x 1 fil;0.001
  msg                Turbulence energy distribution
  msg  Press Enter to continue
  pause
  con off;red
  con EL1 x 1 fil;0.001
  msg                Length scale distribution
  msg(Press Enter to continue
  pause
  con off;red
  con ENUT x 1 fil;0.001
  msg                Turbulence viscosity distribution
  ENDUSE
  DISPLAY
  This case  represents  the  flow  in  a circular duct that has an
  abrupt enlargement at the  inlet.The  duct  wall  is  held  at  a
  constant temperature.

  Auxiliary relations  comprise  a turbulence model similar to that
  of Prandtl.  The length scale distributions are determined as  of
  the type proposed by Ranchal and Spalding in 1972 ( J. of Waerme-
  und Stoff Uebertragung, 5, 1972 )

  PLANT is   used   to  introduce  the  codings  for  length  scale
  distributions guided by the formulae provided in  Group  9 in the
  string marked PRPT01.
  ENDDIS
      PLANTBEGIN
   ** Length scale distribution
  LEN1=AMIN1(.0166*EXP(60.*(.2-RG2D)-1.),               .01$
6*(ZGNZ/0.2)**1.09,0.12)
      PLANTEND
 ************************************************************
  Group 1. Run Title and Number
 ************************************************************
 ************************************************************
 
 TEXT(In-Form equivalent of PLANT case Z140   )
 
 ************************************************************
 ************************************************************
 
 IRUNN = 1 ;LIBREF = 740
 ************************************************************
  Group 2. Time dependence
 STEADY = T
 ************************************************************
  Group 3. X-Direction Grid Spacing
 CARTES = F
 NX = 1
 XULAST =1.
 XFRAC(1)=1.
 ************************************************************
  Group 4. Y-Direction Grid Spacing
 NY = 20
 YVLAST =0.2
 YFRAC(1)=0.05 ;YFRAC(3)=0.15
 YFRAC(5)=0.25 ;YFRAC(7)=0.35
 YFRAC(9)=0.45 ;YFRAC(11)=0.55
 YFRAC(13)=0.65 ;YFRAC(15)=0.75
 YFRAC(17)=0.85 ;YFRAC(19)=0.95
 ************************************************************
  Group 5. Z-Direction Grid Spacing
 PARAB = F
 NZ = 20
 ZWLAST =2.
 ZFRAC(1)=0.05 ;ZFRAC(6)=0.3
 ZFRAC(11)=0.55 ;ZFRAC(16)=0.8
 ************************************************************
  Group 6. Body-Fitted Coordinates
 ************************************************************
  Group 7. Variables: STOREd,SOLVEd,NAMEd
 ONEPHS = T
 NAME(1)=P1 ;NAME(5)=V1
 NAME(7)=W1 ;NAME(12)=KE
 NAME(14)=H1 ;NAME(149)=EL1
 NAME(150)=ENUT
    * Y in SOLUTN argument list denotes:
    * 1-stored 2-solved 3-whole-field
    * 4-point-by-point 5-explicit 6-harmonic averaging 
 SOLUTN(P1,Y,Y,N,N,N,N)
 SOLUTN(V1,Y,Y,N,N,N,Y)
 SOLUTN(W1,Y,Y,N,N,N,Y)
 SOLUTN(KE,Y,Y,N,N,N,N)
 SOLUTN(H1,Y,Y,N,N,N,Y)
 SOLUTN(EL1,Y,N,N,N,N,Y)
 SOLUTN(ENUT,Y,N,N,N,N,Y)
 VIST = 150
 LEN1 = 149
 ************************************************************
  Group 8. Terms & Devices
    * Y in TERMS argument list denotes:
    * 1-built-in source 2-convection 3-diffusion 4-transient
    * 5-first phase variable 6-interphase transport         
 TERMS(P1,Y,Y,Y,N,Y,Y)
 TERMS(V1,Y,Y,Y,Y,Y,Y)
 TERMS(W1,Y,Y,Y,Y,Y,Y)
 TERMS(KE,Y,Y,Y,Y,Y,Y)
 TERMS(H1,N,Y,Y,Y,Y,Y)
 DIFCUT =0.5 ;ZDIFAC =1.
 GALA = F ;ADDDIF = F
 NEWENT = T
 ISOLX = -1 ;ISOLY = -1 ;ISOLZ = -1
 ************************************************************
  Group 9. Properties used if PRPS is not
  stored, and where PRPS = -1.0 if it is!
 RHO1 =1. ;TMP1 =0.
 EL1 =1.
 TSURR =0. ;TEMP0 =0.
 PRESS0 =0.
 DVO1DT =0. ;DRH1DP =0.
 EMISS =0. ;SCATT =0.
 RADIA =0. ;RADIB =0.
 ENUL =8.0E-06 ;ENUT = GRND3
 ENUTA =0. ;ENUTB =0.
 ENUTC =0.
 IENUTA = 0
 PRNDTL(V1)=1. ;PRNDTL(W1)=1.
 PRNDTL(KE)=1. ;PRNDTL(H1)=3.
 PRT(V1)=1. ;PRT(W1)=1.
 PRT(KE)=1.5 ;PRT(H1)=0.5
 CP1 =1. ;CP2 =1.
 ************************************************************
  Group 10.Inter-Phase Transfer Processes
 ************************************************************
  Group 11.Initial field variables (PHIs)
 FIINIT(P1)=1.0E-10 ;FIINIT(V1)=1.0E-10
 FIINIT(W1)=0.1 ;FIINIT(KE)=1.0E-10
 FIINIT(H1)=1.0E-10 ;FIINIT(EL1)=1.0E-10
 FIINIT(ENUT)=1.0E-10
   No PATCHes yet used for this Group
 INIADD = F
 FSWEEP = 1
 NAMFI =CHAM
 ************************************************************
  Group 12. Patchwise adjustment of terms
  Patches for this group are printed with those
  for Group 13.
  Their names begin either with GP12 or &
 ************************************************************
  Group 13. Boundary & Special Sources
 
 PATCH(KESOURCE,PHASEM, 0, 0, 0, 0, 0, 0, 1, 1)
 COVAL(KESOURCE,KE , GRND4 , GRND4 )
 
 PATCH(INLET ,LOW , 1, 1, 1, 10, 1, 1, 1, 1)
 COVAL(INLET ,P1 , FIXFLU ,2. )
 COVAL(INLET ,W1 ,0. ,2. )
 COVAL(INLET ,KE ,0. ,0.12 )
 COVAL(INLET ,H1 ,0. ,1. )
 
 PATCH(OUTLET ,HIGH , 1, 1, 1, 20, 20, 20, 1, 1)
 COVAL(OUTLET ,P1 , FIXVAL ,0. )
 
 PATCH(LOWWAL ,LWALL , 1, 1, 11, 20, 1, 1, 1, 1)
 COVAL(LOWWAL ,V1 , GRND2 ,0. )
 COVAL(LOWWAL ,KE , GRND2 , GRND2 )
 
 PATCH(NORWAL ,NWALL , 1, 1, 20, 20, 1, 20, 1, 1)
 COVAL(NORWAL ,W1 , GRND2 ,0. )
 COVAL(NORWAL ,KE , GRND2 , GRND2 )
 COVAL(NORWAL ,H1 , GRND2 ,0. )
 XCYCLE = F
 EGWF = T
 WALLCO = GRND2
 ************************************************************
  Group 14. Downstream Pressure For PARAB
 ************************************************************
  Group 15. Terminate Sweeps
 LSWEEP = 50 ;ISWC1 = 1
 LITHYD = 1 ;LITFLX = 1 ;LITC = 1 ;ITHC1 = 1
 SELREF = T
 RESFAC =1.0E-04
 ************************************************************
  Group 16. Terminate Iterations
 LITER(P1)=20 ;LITER(V1)=10
 LITER(W1)=10 ;LITER(KE)=20
 LITER(H1)=20
 ENDIT(P1)=1.0E-03 ;ENDIT(V1)=1.0E-03
 ENDIT(W1)=1.0E-03 ;ENDIT(KE)=1.0E-03
 ENDIT(H1)=1.0E-03
 ************************************************************
  Group 17. Relaxation
 RELAX(P1,LINRLX,1.)
 RELAX(V1,FALSDT,1.)
 RELAX(W1,FALSDT,1.)
 RELAX(KE,LINRLX,0.5)
 RELAX(H1,FALSDT,1.0E+09)
 RELAX(EL1,LINRLX,1.)
 RELAX(ENUT,LINRLX,1.)
 KELIN = 0
 OVRRLX =0.
 EXPERT = F ;NNORSL = F
 ************************************************************
  Group 18. Limits
 VARMAX(P1)=1.0E+10 ;VARMIN(P1)=-1.0E+10
 VARMAX(V1)=1.0E+06 ;VARMIN(V1)=-1.0E+06
 VARMAX(W1)=1.0E+06 ;VARMIN(W1)=-1.0E+06
 VARMAX(KE)=1.0E+10 ;VARMIN(KE)=1.0E-10
 VARMAX(H1)=1.0E+10 ;VARMIN(H1)=-1.0E+10
 VARMAX(EL1)=1.0E+10 ;VARMIN(EL1)=-1.0E+10
 VARMAX(ENUT)=1.0E+10 ;VARMIN(ENUT)=-1.0E+10
 ************************************************************
  Group 19. Data transmitted to GROUND
 GENK = T
 PARSOL = F
 ISG62 = 1
 SPEDAT(SET,PROPERTY,EL1,C,=MIN(.0166*EXP(60.*(.2-RG)-1.)&MIN(.016$)
 SPEDAT(SET,PROPERTY,EL1,C,*(ZG/0.2)^1.09&0.12)))
 SPEDAT(SET,LONGNAME,EL1,C,=MIN(.0166*EXP(60.*(.2-RG)-1.)&MIN(.016$)
 SPEDAT(SET,LONGNAME,EL1,C,*(ZG/0.2)^1.09&0.12)))
 ************************************************************
  Group 20. Preliminary Printout
 DISTIL = T ;NULLPR = F
 NDST = 0
 DSTTOL =1.0E-02
 EX(P1)=0.1492 ;EX(V1)=0.02481
 EX(W1)=0.6473 ;EX(KE)=0.
 EX(H1)=0.9695 ;EX(EL1)=0.06807
 EX(ENUT)=0.01062
 ************************************************************
  Group 21. Print-out of Variables
 INIFLD = F ;SUBWGR = F
    * Y in OUTPUT argument list denotes:
    * 1-field 2-correction-eq. monitor 3-selective dumping      
    * 4-whole-field residual 5-spot-value table 6-residual table
 OUTPUT(P1,Y,N,Y,Y,Y,Y)
 OUTPUT(V1,Y,N,Y,Y,Y,Y)
 OUTPUT(W1,Y,N,Y,Y,Y,Y)
 OUTPUT(KE,N,N,Y,Y,N,N)
 OUTPUT(H1,Y,N,Y,Y,Y,Y)
 OUTPUT(EL1,Y,N,Y,N,N,N)
 OUTPUT(ENUT,Y,N,Y,N,N,N)
 ************************************************************
  Group 22. Monitor Print-Out
 IXMON = 1 ;IYMON = 19 ;IZMON = 10
 NPRMON = 20 ;NPRMNT = 1 ;TSTSWP = -1
 UWATCH = T ;USTEER = T
 HIGHLO = F
 ************************************************************
  Group 23.Field Print-Out & Plot Control
 NPRINT = 100000 ;NUMCLS = 5
 NYPRIN = 2 ;IYPRF = 1 ;IYPRL = 10000
 NZPRIN = 5 ;IZPRF = 1 ;IZPRL = 10000
 XZPR = F ;YZPR = F
 IPLTF = 1 ;IPLTL = 50 ;NPLT = 1
 ISWPRF = 1 ;ISWPRL = 100000
 ITABL = 3 ;IPROF = 1
 ABSIZ =0.5 ;ORSIZ =0.4
 NTZPRF = 1 ;NCOLPF = 50
 ICHR = 2 ;NCOLCO = 45 ;NROWCO = 20
   No PATCHes yet used for this Group
 ************************************************************
  Group 24. Dumps For Restarts
 SAVE = T ;NOWIPE = F
 NSAVE =CHAM
STOP