TALK=T;RUN(1,1)
  PHOTON USE
  p
  n4



  up z
  gr x 1
  msg contours of vfol at time = 2.0s
  con vfol x 1 sh;0.45 0.55 40
  msg velocity vectors
  vec x 1
  pause
  p
  n8



  up z
  gr x 1
  msg contours of vfol at time = 4.0s
  con vfol x 1 sh;0.45 0.55 40
  msg velocity vectors
  vec x 1
  pause
  p
  n12



  up z
  gr x 1
  msg contours of vfol at time = 6.0s
  con vfol x 1 sh;0.45 0.55 40
  msg velocity vectors
  vec x 1
  pause
  p
  n16



  up z
  gr x 1
  msg contours of vfol at time = 8.0s
  con vfol x 1 sh;0.45 0.55 40
  msg velocity vectors
  vec x 1
  pause
  p
  n20



  up z
  gr x 1
  msg contours of vfol at time = 10.0s
  con vfol x 1 sh;0.45 0.55 40
  msg velocity vectors
  vec x 1
  msg            -
  msg Press e to END
  enduse
  DISPLAY
  FREE SURFACE FLOW - Filling of a duct by H(eight) O(f) L(iguid)
  method

  2-dimensional (y-z), Cartesian, transient, elliptic simulation

  Vessel dimensions: 0.5 m x 0.5 m x 1m (height). Liquid enters
  at the bottom corner.
                 +-----------+
                 |           |
                 |           |      z ^
                 |           |        |
                 |           |        +---->
                 |           |             y
                 +-------  ^ +
                           |  liquid inflow
  enddis
 ************************************************************
  Group 1. Run Title and Number
 ************************************************************
 ************************************************************
 
 TEXT(FILLING OF A 2D DUCT BY HOL:P100        )
 
 ************************************************************
 ************************************************************
 
 IRUNN = 1 ;LIBREF = 14
 ************************************************************
  Group 2. Time dependence
 STEADY = F
    * Set overall time and no. of steps
 TFIRST =0. ;TLAST =1.
 FSTEP = 1 ;LSTEP = 20
   Method of pairs used for grid setting.
 TFRAC(2)=0.5
 ************************************************************
  Group 3. X-Direction Grid Spacing
 CARTES = T
 NX = 1
 XULAST =0.5
 XFRAC(1)=1.
 ************************************************************
  Group 4. Y-Direction Grid Spacing
 NY = 5
 YVLAST =0.5
 YFRAC(1)=0.2 ;YFRAC(2)=0.4
 YFRAC(3)=0.6 ;YFRAC(4)=0.8
 YFRAC(5)=1.
 ************************************************************
  Group 5. Z-Direction Grid Spacing
 PARAB = F
 NZ = 10
 ZWLAST =1.
 ZFRAC(1)=0.1 ;ZFRAC(2)=0.2
 ZFRAC(3)=0.3 ;ZFRAC(4)=0.4
 ZFRAC(5)=0.5 ;ZFRAC(6)=0.6
 ZFRAC(7)=0.7 ;ZFRAC(8)=0.8
 ZFRAC(9)=0.9 ;ZFRAC(10)=1.
 ************************************************************
  Group 6. Body-Fitted Coordinates
 ************************************************************
  Group 7. Variables: STOREd,SOLVEd,NAMEd
 ONEPHS = T
 NAME(1)=P1 ;NAME(5)=V1
 NAME(7)=W1 ;NAME(148)=VFOL
 NAME(149)=PRPS ;NAME(150)=DEN1
    * Y in SOLUTN argument list denotes:
    * 1-stored 2-solved 3-whole-field
    * 4-point-by-point 5-explicit 6-harmonic averaging 
 SOLUTN(P1,Y,Y,Y,N,N,N)
 SOLUTN(V1,Y,Y,N,N,N,N)
 SOLUTN(W1,Y,Y,N,N,N,N)
 SOLUTN(VFOL,Y,Y,N,N,N,Y)
 SOLUTN(PRPS,Y,N,N,N,N,Y)
 SOLUTN(DEN1,Y,N,N,N,N,Y)
 DEN1 = 150
 PRPS = 149
 ************************************************************
  Group 8. Terms & Devices
    * Y in TERMS argument list denotes:
    * 1-built-in source 2-convection 3-diffusion 4-transient
    * 5-first phase variable 6-interphase transport         
 TERMS(P1,Y,Y,Y,N,Y,Y)
 TERMS(V1,Y,Y,Y,Y,Y,Y)
 TERMS(W1,Y,Y,Y,Y,Y,Y)
 TERMS(VFOL,N,N,N,N,Y,Y)
 DIFCUT =0.5 ;ZDIFAC =1.
 GALA = T ;ADDDIF = F
 RUPLIM =0. ;RLOLIM =0.
 ISOLX = -1 ;ISOLY = -1 ;ISOLZ = -1
 ************************************************************
  Group 9. Properties used if PRPS is not
  stored, and where PRPS = -1.0 if it is!
 RHO1 =1. ;TMP1 =0.
 EL1 =0.
 TSURR =0. ;TEMP0 =0.
 PRESS0 =0.
 DVO1DT =0. ;DRH1DP =0.
 EMISS =0. ;SCATT =0.
 RADIA =0. ;RADIB =0.
 ENUL =1.0E-05 ;ENUT =0.
 PRNDTL(V1)=1. ;PRNDTL(W1)=1.
 PRT(V1)=1. ;PRT(W1)=1.
 CP1 =1. ;CP2 =1.
 ************************************************************
  Group 10.Inter-Phase Transfer Processes
 ************************************************************
  Group 11.Initial field variables (PHIs)
 FIINIT(P1)=0. ;FIINIT(V1)=0.
 FIINIT(W1)=0.1 ;FIINIT(VFOL)=0.
 FIINIT(PRPS)=-1. ;FIINIT(DEN1)=1.161
   No PATCHes yet used for this Group
 INIADD = F
 FSWEEP = 1
 NAMFI =CHAM
 ************************************************************
  Group 12. Patchwise adjustment of terms
  Patches for this group are printed with those
  for Group 13.
  Their names begin either with GP12 or &
 ************************************************************
  Group 13. Boundary & Special Sources
 
 PATCH(IFLO ,LOW , 1, 1, 5, 5, 1, 1, 1, 20)
 COVAL(IFLO ,P1 , FIXFLU ,100.050003 )
 COVAL(IFLO ,W1 ,0. ,0.1 )
 COVAL(IFLO ,VFOL,0. ,9.995003E-04 )
 
 PATCH(GRAV ,PHASEM, 1, 1, 1, 5, 1, 10, 1, 20)
 COVAL(GRAV ,W1 , FIXFLU ,-9.81 )
 
 PATCH(REFP ,CELL , 1, 1, 5, 5, 10, 10, 1, 20)
 COVAL(REFP ,P1 , GRND ,0. )
 XCYCLE = F
 EGWF = T
 WALLCO = GRND2
 ************************************************************
  Group 14. Downstream Pressure For PARAB
 ************************************************************
  Group 15. Terminate Sweeps
 LSWEEP = 10 ;ISWC1 = 1
 LITHYD = 1 ;LITFLX = 1 ;LITC = 1 ;ITHC1 = 1
 SELREF = T
 RESFAC =1.0E-04
 ************************************************************
  Group 16. Terminate Iterations
 LITER(P1)=20 ;LITER(V1)=10
 LITER(W1)=10 ;LITER(VFOL)=20
 ENDIT(P1)=1.0E-03 ;ENDIT(V1)=1.0E-03
 ENDIT(W1)=1.0E-03 ;ENDIT(VFOL)=1.0E-03
 ************************************************************
  Group 17. Relaxation
 RELAX(P1,LINRLX,1.)
 RELAX(V1,FALSDT,1.0E-03)
 RELAX(W1,FALSDT,1.0E-03)
 RELAX(VFOL,FALSDT,1.0E+09)
 RELAX(PRPS,LINRLX,1.)
 RELAX(DEN1,LINRLX,1.)
 OVRRLX =0.
 EXPERT = F ;NNORSL = F
 ************************************************************
  Group 18. Limits
 VARMAX(P1)=1.0E+10 ;VARMIN(P1)=-1.0E+10
 VARMAX(V1)=1.0E+06 ;VARMIN(V1)=-1.0E+06
 VARMAX(W1)=1.0E+06 ;VARMIN(W1)=-1.0E+06
 VARMAX(VFOL)=1.0E+10 ;VARMIN(VFOL)=-1.0E+10
 VARMAX(PRPS)=1.0E+10 ;VARMIN(PRPS)=-1.0E+10
 VARMAX(DEN1)=1.0E+10 ;VARMIN(DEN1)=-1.0E+10
 ************************************************************
  Group 19. Data transmitted to GROUND
 HOL = T
 PARSOL = F
 IDISPB = 1 ;IDISPC = 20
 IHOLA = 3
 IPRPSA = 67
 ISG62 = 1
 SPEDAT(SET,GXMONI,TRANSIENT,L,F)
 SPEDAT(SET,MATERIAL,67,L,T)
 SPEDAT(SET,MATERIAL,0,L,T)
 ************************************************************
  Group 20. Preliminary Printout
 ************************************************************
  Group 21. Print-out of Variables
 INIFLD = F ;SUBWGR = F
    * Y in OUTPUT argument list denotes:
    * 1-field 2-correction-eq. monitor 3-selective dumping      
    * 4-whole-field residual 5-spot-value table 6-residual table
 OUTPUT(P1,Y,Y,Y,Y,Y,Y)
 OUTPUT(V1,Y,Y,Y,Y,Y,Y)
 OUTPUT(W1,Y,Y,Y,Y,Y,Y)
 OUTPUT(VFOL,Y,N,Y,N,N,N)
 OUTPUT(PRPS,Y,N,Y,N,N,N)
 OUTPUT(DEN1,Y,N,Y,N,N,N)
 ************************************************************
  Group 22. Monitor Print-Out
 IXMON = 1 ;IYMON = 5 ;IZMON = 6
 NPRMON = 10 ;NPRMNT = 1 ;TSTSWP = -1
 UWATCH = T ;USTEER = T
 HIGHLO = F
 ************************************************************
  Group 23.Field Print-Out & Plot Control
 NPRINT = 100000 ;NUMCLS = 5
 NTPRIN = 10 ;ISTPRF = 1 ;ISTPRL = 100000
 NYPRIN = -1 ;IYPRF = 1 ;IYPRL = 10000
 NZPRIN = -1 ;IZPRF = 1 ;IZPRL = 10000
 XZPR = F ;YZPR = F
 IPLTF = 1 ;IPLTL = -1 ;NPLT = -1
 ISWPRF = 1 ;ISWPRL = 100000
 ITABL = 3 ;IPROF = 1
 ABSIZ =0.5 ;ORSIZ =0.4
 NTZPRF = 1 ;NCOLPF = 50
 ICHR = 2 ;NCOLCO = 45 ;NROWCO = 20
   No PATCHes yet used for this Group
 ************************************************************
  Group 24. Dumps For Restarts
 SAVE = T ;NOWIPE = F
 NSAVE =CHAM
 IDISPA = 4 ;IDISPB = 1 ;IDISPC = 20
 CSG1    ='N'
STOP