```
TALK=T;RUN(1,1)
PHOTON USE
p
phi

msg         CONJUGATE HEAT TRANSFER IN A CURVED DUCT
msg
cl
set ref vec 2
msg   Velocity vectors:
gr ou x 1;vec x 1 sh
con blok x 1;int 1
msg
msg Press  to continue
pause
con off;red
msg        Temperature distribution:
con tem1 x 1 fi;.001
con blok x 1;int 1
msg            -
msg Press  to continue
pause
con off;red
msg        Streamlines:
str 2d x 1 sh;int 30
con blok x 1;int 1
msg
msg Press e to END
enduse
DISPLAY
This case deals with conjugate heat transfer between a metal
solid which stands in the middle of a curved 2-D duct, and a
cold air stream which flows through the duct,passing the
'obstacle'. The geometry is represented by means of body-fitted
coordinates
ENDDIS
************************************************************
Group 1. Run Title and Number
************************************************************
************************************************************

TEXT(CONJ.HEAT TRANS.IN A CURVED DUCT: B459  )

************************************************************
************************************************************

IRUNN = 1 ;LIBREF = 14
************************************************************
Group 2. Time dependence
************************************************************
Group 3. X-Direction Grid Spacing
CARTES = T
NX = 1
XULAST =1.
************************************************************
Group 4. Y-Direction Grid Spacing
NY = 10
YVLAST =0.05
************************************************************
Group 5. Z-Direction Grid Spacing
PARAB = F
NZ = 10
ZWLAST =0.2
************************************************************
Group 6. Body-Fitted Coordinates
BFC = T ;NONORT = F
NCRT = -1
RSTGEO = F ;SAVGEO = F
UUP = F ;VUP = F ;WUP = F
NGEOM =CHAM
NAMXYZ =CHAM
ANGMIN =20.
DOMAIN(   1,   2,   1,  11,   1,  11)
* Set fixed sub-domain
FIXDOM(   1,   0,   0,   0,   0,   0,   0)
FIXDOM(   2,   0,   0,   0,   0,   0,   0)
FIXDOM(   3,   0,   0,   0,   0,   0,   0)
FIXDOM(   4,   0,   0,   0,   0,   0,   0)
FIXDOM(   5,   0,   0,   0,   0,   0,   0)
FIXDOM(   6,   0,   0,   0,   0,   0,   0)
FIXDOM(   7,   0,   0,   0,   0,   0,   0)
FIXDOM(   8,   0,   0,   0,   0,   0,   0)
FIXDOM(   9,   0,   0,   0,   0,   0,   0)
FIXDOM(  10,   0,   0,   0,   0,   0,   0)
LIJ = F ;LJK = T ;LIK = F
************************************************************
Group 7. Variables: STOREd,SOLVEd,NAMEd
ONEPHS = T
NAME(1)=P1 ;NAME(5)=V1
NAME(7)=W1 ;NAME(143)=VISL
NAME(144)=DEN1 ;NAME(145)=BLOK
NAME(146)=PRPS ;NAME(147)=TEM1
NAME(148)=WCRT ;NAME(149)=VCRT
NAME(150)=UCRT
* Y in SOLUTN argument list denotes:
* 1-stored 2-solved 3-whole-field
* 4-point-by-point 5-explicit 6-harmonic averaging
SOLUTN(P1,Y,Y,Y,N,N,N)
SOLUTN(V1,Y,Y,N,N,N,Y)
SOLUTN(W1,Y,Y,N,N,N,Y)
SOLUTN(VISL,Y,N,N,N,N,Y)
SOLUTN(DEN1,Y,N,N,N,N,Y)
SOLUTN(BLOK,Y,N,N,N,N,Y)
SOLUTN(PRPS,Y,N,N,N,N,Y)
SOLUTN(TEM1,Y,Y,Y,N,N,Y)
SOLUTN(WCRT,Y,N,N,N,N,N)
SOLUTN(VCRT,Y,N,N,N,N,N)
SOLUTN(UCRT,Y,N,N,N,N,N)
DEN1 = 144
VISL = 143
IVARBK = 147 ;ISOLBK = 1
PRNITS= F ;OPTRLX= F ;NOSIP= F ;ALLVBC= F
DBSOLV= F ;IMPINI= F ;EARL1D= F
PRPS = 146
************************************************************
Group 8. Terms & Devices
* Y in TERMS argument list denotes:
* 1-built-in source 2-convection 3-diffusion 4-transient
* 5-first phase variable 6-interphase transport
TERMS(P1,Y,Y,Y,N,Y,Y)
TERMS(V1,Y,Y,Y,Y,Y,Y)
TERMS(W1,Y,Y,Y,Y,Y,Y)
TERMS(TEM1,N,Y,Y,Y,N,Y)
DIFCUT =0.5 ;ZDIFAC =1.
GALA = F ;ADDDIF = F
ISOLX = -1 ;ISOLY = -1 ;ISOLZ = -1
************************************************************
Group 9. Properties used if PRPS is not
stored, and where PRPS = -1.0 if it is!
RHO1 =1. ;TMP1 =0.
EL1 =0.
TSURR =0. ;TEMP0 =0.
PRESS0 =0.
DVO1DT =0. ;DRH1DP =0.
EMISS =0. ;SCATT =0.
ENUL = FILE ;ENUT =0.
PRNDTL(V1)=1. ;PRNDTL(W1)=1.
PRNDTL(TEM1)=CONDFILE
PRT(V1)=1. ;PRT(W1)=1.
PRT(TEM1)=1.
CP1 =1. ;CP2 =1.
************************************************************
Group 10.Inter-Phase Transfer Processes
************************************************************
Group 11.Initial field variables (PHIs)
FIINIT(P1)=1.0E-10 ;FIINIT(V1)=1.0E-10
FIINIT(W1)=1. ;FIINIT(VISL)=1.0E-10
FIINIT(DEN1)=1.0E-10 ;FIINIT(BLOK)=1.
FIINIT(PRPS)=0. ;FIINIT(TEM1)=1.0E-10
FIINIT(WCRT)=1.0E-10 ;FIINIT(VCRT)=1.0E-10
FIINIT(UCRT)=1.0E-10

PATCH(SOLID ,INIVAL, 1, 1, 5, 6, 4, 5, 1, 1)
INIT(SOLID ,BLOK,0. ,2. )
INIT(SOLID ,PRPS,0. ,103. )
INIT(SOLID ,TEM1,0. ,5. )
FSWEEP = 1
NAMFI =CHAM
************************************************************
Group 12. Patchwise adjustment of terms
Patches for this group are printed with those
for Group 13.
Their names begin either with GP12 or &
************************************************************
Group 13. Boundary & Special Sources

PATCH(INLET ,LOW , 1, 1, 1, 10, 1, 1, 1, 1)
COVAL(INLET ,P1 , FIXFLU ,1.29 )
COVAL(INLET ,V1 ,0. ,0. )
COVAL(INLET ,W1 ,0. ,1. )
COVAL(INLET ,TEM1,0. ,5. )

PATCH(HOTHOT ,CELL , 1, 1, 5, 6, 4, 5, 1, 1)
COVAL(HOTHOT ,TEM1, FIXFLU ,10. )

PATCH(OUTLET ,HIGH , 1, 1, 1, 10, 10, 10, 1, 1)
COVAL(OUTLET ,P1 ,1.0E+05 ,0. )

PATCH(WALL1 ,NWALL , 1, 1, 10, 10, 1, 10, 1, 1)
COVAL(WALL1 ,W1 ,1. ,0. )

PATCH(WALL2 ,SWALL , 1, 1, 1, 1, 1, 10, 1, 1)
COVAL(WALL2 ,W1 ,1. ,0. )
XCYCLE = F
EGWF = T
WALLCO = GRND2
************************************************************
Group 14. Downstream Pressure For PARAB
************************************************************
Group 15. Terminate Sweeps
LSWEEP = 50 ;ISWC1 = 1
LITHYD = 1 ;LITFLX = 1 ;LITC = 1 ;ITHC1 = 1
SELREF = T
RESFAC =1.0E-02
************************************************************
Group 16. Terminate Iterations
LITER(P1)=20 ;LITER(V1)=10
LITER(W1)=10 ;LITER(TEM1)=100
ENDIT(P1)=1.0E-03 ;ENDIT(V1)=1.0E-03
ENDIT(W1)=1.0E-03 ;ENDIT(TEM1)=1.0E-03
************************************************************
Group 17. Relaxation
RELAX(P1,LINRLX,0.7)
RELAX(V1,FALSDT,1.0E-02)
RELAX(W1,FALSDT,1.0E-02)
RELAX(VISL,LINRLX,1.)
RELAX(DEN1,LINRLX,1.)
RELAX(BLOK,LINRLX,1.)
RELAX(PRPS,LINRLX,1.)
RELAX(TEM1,FALSDT,1.0E+09)
RELAX(WCRT,LINRLX,1.)
RELAX(VCRT,LINRLX,1.)
RELAX(UCRT,LINRLX,1.)
OVRRLX =0.
EXPERT = F ;NNORSL = F
************************************************************
Group 18. Limits
VARMAX(P1)=1.0E+10 ;VARMIN(P1)=-1.0E+10
VARMAX(V1)=1.0E+06 ;VARMIN(V1)=-1.0E+06
VARMAX(W1)=1.0E+06 ;VARMIN(W1)=-1.0E+06
VARMAX(VISL)=1.0E+10 ;VARMIN(VISL)=-1.0E+10
VARMAX(DEN1)=1.0E+10 ;VARMIN(DEN1)=-1.0E+10
VARMAX(BLOK)=1.0E+10 ;VARMIN(BLOK)=-1.0E+10
VARMAX(PRPS)=1.0E+10 ;VARMIN(PRPS)=-1.0E+10
VARMAX(TEM1)=1.0E+10 ;VARMIN(TEM1)=-1.0E+10
VARMAX(WCRT)=1.0E+10 ;VARMIN(WCRT)=-1.0E+10
VARMAX(VCRT)=1.0E+10 ;VARMIN(VCRT)=-1.0E+10
VARMAX(UCRT)=1.0E+10 ;VARMIN(UCRT)=-1.0E+10
************************************************************
Group 19. Data transmitted to GROUND
PARSOL = F
ISG62 = 1
SPEDAT(SET,MATERIAL,0,L,T)
SPEDAT(SET,MATERIAL,103,L,T)
************************************************************
Group 20. Preliminary Printout
************************************************************
Group 21. Print-out of Variables
INIFLD = F ;SUBWGR = F
* Y in OUTPUT argument list denotes:
* 1-field 2-correction-eq. monitor 3-selective dumping
* 4-whole-field residual 5-spot-value table 6-residual table
OUTPUT(P1,Y,N,Y,Y,Y,Y)
OUTPUT(V1,Y,N,Y,Y,Y,Y)
OUTPUT(W1,Y,N,Y,Y,Y,Y)
OUTPUT(VISL,Y,N,Y,N,N,N)
OUTPUT(DEN1,Y,N,Y,N,N,N)
OUTPUT(BLOK,Y,N,Y,N,N,N)
OUTPUT(PRPS,Y,N,Y,N,N,N)
OUTPUT(TEM1,Y,N,Y,Y,Y,Y)
OUTPUT(WCRT,Y,N,Y,N,N,N)
OUTPUT(VCRT,Y,N,Y,N,N,N)
OUTPUT(UCRT,Y,N,Y,N,N,N)
************************************************************
Group 22. Monitor Print-Out
IXMON = 1 ;IYMON = 6 ;IZMON = 6
NPRMON = 100000 ;NPRMNT = 1 ;TSTSWP = -1
UWATCH = T ;USTEER = T
HIGHLO = F
************************************************************
Group 23.Field Print-Out & Plot Control
NPRINT = 100000 ;NUMCLS = 5
NYPRIN = -1 ;IYPRF = 1 ;IYPRL = 10000
NZPRIN = -1 ;IZPRF = 1 ;IZPRL = 10000
XZPR = F ;YZPR = F
IPLTF = 1 ;IPLTL = -1 ;NPLT = -1
ISWPRF = 1 ;ISWPRL = 100000
ITABL = 3 ;IPROF = 1
ABSIZ =0.5 ;ORSIZ =0.4
NTZPRF = 1 ;NCOLPF = 50
ICHR = 2 ;NCOLCO = 45 ;NROWCO = 20
No PATCHes yet used for this Group
************************************************************
Group 24. Dumps For Restarts
SAVE = T ;NOWIPE = F
NSAVE =CHAM
STOP
```