TALK=T;RUN(1,1)
  DISPLAY
  The solution domain is a cylindrical quadrant in which the hull
  half-section occupies the region near the axis.  The south
  boundary represents the hull surface and the east boundary the
  waterline. The north cylindrical boundary has a constant
  pressure specification to simulate approximately an infinite
  domain by allowing mass and axial momentum to cross it.
  The inlet plane is at midships and the outlet plane is placed
  beyond the stern. A boundary-layer inlet profile is prescribed
  at the inlet and a fixed-pressure condition is supplied at the
  exit.
    The active input commands define a viscous-flow calculation,
  using a prescribed turbulent kinematic viscosity. The skin-
  friction at the hull is evaluated by means of the logarithmic
  law.
    The grid in file GRID2 was generated by algebraic interpolation.
  ENDDIS
 ************************************************************
  Group 1. Run Title and Number
 ************************************************************
 ************************************************************
 
 TEXT(FLOW AROUND A SHIP'S STERN :        B530)
 
 ************************************************************
 ************************************************************
 
 IRUNN = 1 ;LIBREF = 14
 ************************************************************
  Group 2. Time dependence
 STEADY = T
 ************************************************************
  Group 3. X-Direction Grid Spacing
 CARTES = T
 NX = 5
 XULAST =1.
 ************************************************************
  Group 4. Y-Direction Grid Spacing
 NY = 7
 YVLAST =1.
 ************************************************************
  Group 5. Z-Direction Grid Spacing
 PARAB = F
 NZ = 16
 ZWLAST =1.
 ************************************************************
  Group 6. Body-Fitted Coordinates
 BFC = T ;NONORT = T
 NCRT = -1
 RSTGEO = F ;SAVGEO = F
 UUP = F ;VUP = F ;WUP = F
 NGEOM =CHAM
 NAMXYZ =CHAM
 ANGMIN =20.
 DOMAIN(   1,   6,   1,   8,   1,  17)
    * Set fixed sub-domain
 FIXDOM(   1,   0,   0,   0,   0,   0,   0)
 FIXDOM(   2,   0,   0,   0,   0,   0,   0)
 FIXDOM(   3,   0,   0,   0,   0,   0,   0)
 FIXDOM(   4,   0,   0,   0,   0,   0,   0)
 FIXDOM(   5,   0,   0,   0,   0,   0,   0)
 FIXDOM(   6,   0,   0,   0,   0,   0,   0)
 FIXDOM(   7,   0,   0,   0,   0,   0,   0)
 FIXDOM(   8,   0,   0,   0,   0,   0,   0)
 FIXDOM(   9,   0,   0,   0,   0,   0,   0)
 FIXDOM(  10,   0,   0,   0,   0,   0,   0)
 LIJ = F ;LJK = T ;LIK = F
 ************************************************************
  Group 7. Variables: STOREd,SOLVEd,NAMEd
 ONEPHS = T
 NAME(1)=P1 ;NAME(3)=U1
 NAME(5)=V1 ;NAME(7)=W1
 NAME(147)=ENUT ;NAME(148)=WCRT
 NAME(149)=VCRT ;NAME(150)=UCRT
    * Y in SOLUTN argument list denotes:
    * 1-stored 2-solved 3-whole-field
    * 4-point-by-point 5-explicit 6-harmonic averaging 
 SOLUTN(P1,Y,Y,Y,N,N,N)
 SOLUTN(U1,Y,Y,N,N,N,Y)
 SOLUTN(V1,Y,Y,N,N,N,Y)
 SOLUTN(W1,Y,Y,N,N,N,Y)
 SOLUTN(ENUT,Y,N,N,N,N,Y)
 SOLUTN(WCRT,Y,N,N,N,N,N)
 SOLUTN(VCRT,Y,N,N,N,N,N)
 SOLUTN(UCRT,Y,N,N,N,N,N)
 VIST = 147
 ************************************************************
  Group 8. Terms & Devices
    * Y in TERMS argument list denotes:
    * 1-built-in source 2-convection 3-diffusion 4-transient
    * 5-first phase variable 6-interphase transport         
 TERMS(P1,Y,Y,Y,N,Y,Y)
 TERMS(U1,Y,Y,Y,Y,Y,Y)
 TERMS(V1,Y,Y,Y,Y,Y,Y)
 TERMS(W1,Y,Y,Y,Y,Y,Y)
 DIFCUT =0.5 ;ZDIFAC =1.
 GALA = F ;ADDDIF = F
 ISOLX = -1 ;ISOLY = -1 ;ISOLZ = -1
 ************************************************************
  Group 9. Properties used if PRPS is not
  stored, and where PRPS = -1.0 if it is!
 RHO1 =1000. ;TMP1 =0.
 EL1 =0.
 TSURR =0. ;TEMP0 =0.
 PRESS0 =0.
 DVO1DT =0. ;DRH1DP =0.
 EMISS =0. ;SCATT =0.
 RADIA =0. ;RADIB =0.
 ENUL =1.1E-06 ;ENUT =1.0E-04
 PRNDTL(U1)=1. ;PRNDTL(V1)=1.
 PRNDTL(W1)=1.
 PRT(U1)=1. ;PRT(V1)=1.
 PRT(W1)=1.
 CP1 =1. ;CP2 =1.
 ************************************************************
  Group 10.Inter-Phase Transfer Processes
 ************************************************************
  Group 11.Initial field variables (PHIs)
 FIINIT(P1)=1.726 ;FIINIT(U1)=1.0E-10
 FIINIT(V1)=1.0E-10 ;FIINIT(W1)=1.726
 FIINIT(ENUT)=1.0E-10 ;FIINIT(WCRT)=1.0E-10
 FIINIT(VCRT)=1.0E-10 ;FIINIT(UCRT)=1.0E-10
   No PATCHes yet used for this Group
 INIADD = F
 FSWEEP = 1
 NAMFI =CHAM
 ************************************************************
  Group 12. Patchwise adjustment of terms
  Patches for this group are printed with those
  for Group 13.
  Their names begin either with GP12 or &
 ************************************************************
  Group 13. Boundary & Special Sources
 
 PATCH(INLETY1 ,LOW , 1, 5, 1, 1, 1, 1, 1, 1)
 COVAL(INLETY1 ,P1 , FIXFLU ,1130.529907 )
 COVAL(INLETY1 ,U1 ,0. ,0. )
 COVAL(INLETY1 ,V1 ,0. ,0. )
 COVAL(INLETY1 ,W1 ,0. ,1.13053 )
 
 PATCH(INLETY2 ,LOW , 1, 5, 2, 2, 1, 1, 1, 1)
 COVAL(INLETY2 ,P1 , FIXFLU ,1529.235962 )
 COVAL(INLETY2 ,U1 ,0. ,0. )
 COVAL(INLETY2 ,V1 ,0. ,0. )
 COVAL(INLETY2 ,W1 ,0. ,1.529236 )
 
 PATCH(INLET ,LOW , 1, 5, 3, 7, 1, 1, 1, 1)
 COVAL(INLET ,P1 , FIXFLU ,1726. )
 COVAL(INLET ,U1 ,0. ,0. )
 COVAL(INLET ,V1 ,0. ,0. )
 COVAL(INLET ,W1 ,0. ,1.726 )
 
 PATCH(OUTLET ,HIGH , 1, 5, 1, 7, 16, 16, 1, 1)
 COVAL(OUTLET ,P1 ,1000. ,0. )
 COVAL(OUTLET ,U1 ,0. ,0. )
 COVAL(OUTLET ,V1 ,0. ,0. )
 COVAL(OUTLET ,W1 ,0. ,1.726 )
 
 PATCH(WATER ,NORTH , 1, 5, 7, 7, 1, 16, 1, 1)
 COVAL(WATER ,P1 ,1. ,1.726 )
 COVAL(WATER ,W1 ,0. ,1.726 )
 
 PATCH(WALL ,SWALL , 1, 5, 1, 1, 1, 9, 1, 1)
 COVAL(WALL ,U1 , GRND2 ,0. )
 COVAL(WALL ,W1 , GRND2 ,0. )
 
 PATCH(WFUNAFTW,SWALL , 2, 5, 1, 1, 10, 10, 1, 1)
 COVAL(WFUNAFTW,U1 , GRND2 ,0. )
 COVAL(WFUNAFTW,W1 , GRND2 ,0. )
 
 PATCH(WFUNAFT2,SWALL , 3, 5, 1, 1, 11, 11, 1, 1)
 COVAL(WFUNAFT2,U1 , GRND2 ,0. )
 COVAL(WFUNAFT2,W1 , GRND2 ,0. )
 
 PATCH(WFUNAFT3,SWALL , 3, 5, 1, 1, 12, 12, 1, 1)
 COVAL(WFUNAFT3,U1 , GRND2 ,0. )
 COVAL(WFUNAFT3,W1 , GRND2 ,0. )
 
 PATCH(WFUNAFT4,SWALL , 4, 5, 1, 1, 13, 13, 1, 1)
 COVAL(WFUNAFT4,U1 , GRND2 ,0. )
 COVAL(WFUNAFT4,W1 , GRND2 ,0. )
 XCYCLE = F
 EGWF = T
 WALLCO = GRND2
 ************************************************************
  Group 14. Downstream Pressure For PARAB
 ************************************************************
  Group 15. Terminate Sweeps
 LSWEEP = 20 ;ISWC1 = 1
 LITHYD = 1 ;LITFLX = 1 ;LITC = 1 ;ITHC1 = 1
 SELREF = T
 RESFAC =1.0E-02
 ************************************************************
  Group 16. Terminate Iterations
 LITER(P1)=1 ;LITER(U1)=2
 LITER(V1)=2 ;LITER(W1)=10
 ENDIT(P1)=1.0E-03 ;ENDIT(U1)=1.0E-03
 ENDIT(V1)=1.0E-03 ;ENDIT(W1)=1.0E-03
 ************************************************************
  Group 17. Relaxation
 RELAX(P1,LINRLX,0.1)
 RELAX(U1,FALSDT,0.05)
 RELAX(V1,FALSDT,0.05)
 RELAX(W1,FALSDT,0.05)
 RELAX(ENUT,LINRLX,1.)
 RELAX(WCRT,LINRLX,1.)
 RELAX(VCRT,LINRLX,1.)
 RELAX(UCRT,LINRLX,1.)
 OVRRLX =0.
 EXPERT = F ;NNORSL = F
 ************************************************************
  Group 18. Limits
 VARMAX(P1)=1.0E+10 ;VARMIN(P1)=-1.0E+10
 VARMAX(U1)=1.0E+06 ;VARMIN(U1)=-1.0E+06
 VARMAX(V1)=1.0E+06 ;VARMIN(V1)=-1.0E+06
 VARMAX(W1)=1.0E+06 ;VARMIN(W1)=-1.0E+06
 VARMAX(ENUT)=0.1 ;VARMIN(ENUT)=1.1E-05
 VARMAX(WCRT)=1.0E+10 ;VARMIN(WCRT)=-1.0E+10
 VARMAX(VCRT)=1.0E+10 ;VARMIN(VCRT)=-1.0E+10
 VARMAX(UCRT)=1.0E+10 ;VARMIN(UCRT)=-1.0E+10
 ************************************************************
  Group 19. Data transmitted to GROUND
 PARSOL = F
 ISG62 = 1
 ************************************************************
  Group 20. Preliminary Printout
 ************************************************************
  Group 21. Print-out of Variables
 INIFLD = F ;SUBWGR = F
    * Y in OUTPUT argument list denotes:
    * 1-field 2-correction-eq. monitor 3-selective dumping      
    * 4-whole-field residual 5-spot-value table 6-residual table
 OUTPUT(P1,Y,N,Y,Y,Y,Y)
 OUTPUT(U1,Y,N,Y,Y,Y,Y)
 OUTPUT(V1,Y,N,Y,Y,Y,Y)
 OUTPUT(W1,Y,N,Y,Y,Y,Y)
 OUTPUT(ENUT,Y,N,N,N,Y,Y)
 OUTPUT(WCRT,Y,N,Y,N,N,N)
 OUTPUT(VCRT,Y,N,Y,N,N,N)
 OUTPUT(UCRT,Y,N,Y,N,N,N)
 ************************************************************
  Group 22. Monitor Print-Out
 IXMON = 3 ;IYMON = 2 ;IZMON = 12
 NPRMON = 100000 ;NPRMNT = 1 ;TSTSWP = -1
 UWATCH = T ;USTEER = T
 HIGHLO = F
 ************************************************************
  Group 23.Field Print-Out & Plot Control
 NPRINT = 100000 ;NUMCLS = 5
 NXPRIN = -1 ;IXPRF = 1 ;IXPRL = 10000
 NYPRIN = -1 ;IYPRF = 1 ;IYPRL = 1
 NZPRIN = 2 ;IZPRF = 1 ;IZPRL = 10000
 XZPR = T ;YZPR = F
 IPLTF = 1 ;IPLTL = -1 ;NPLT = -1
 ISWPRF = 1 ;ISWPRL = 100000
 ITABL = 3 ;IPROF = 1
 ABSIZ =0.5 ;ORSIZ =0.4
 NTZPRF = 1 ;NCOLPF = 50
 ICHR = 2 ;NCOLCO = 45 ;NROWCO = 20
 
 PATCH(HULL ,CONTUR, 1, 5, 1, 1, 1, 16, 1, 1)
 PLOT(HULL ,P1 ,0. ,20. )
 
 PATCH(STERN ,CONTUR, 1, 5, 1, 7, 10, 10, 1, 1)
 PLOT(STERN ,P1 ,0. ,20. )
 PLOT(STERN ,WCRT,0. ,20. )
 ************************************************************
  Group 24. Dumps For Restarts
 SAVE = T ;NOWIPE = F
 NSAVE =CHAM
STOP