TALK=T;RUN(1,1)
  PHOTON USE
  p




  gr z 1
  msg Grid
  msg
  vec z 1 sh
  MSG Velocity vectors
  msg
  msg Press return to redraw
  pause
  gr off; gr ou z 1; red
  msg Press return to plot pressure contours
  pause
  cont p1 z 1 fil;.001
  msg
  msg Type e to End
  ENDUSE
  DISPLAY
  This case simulates Prandtl-Meyer turning. The geometry is
  depicted below:
                                       North boundary (not shown)
                                       is curved to follow the
                                       theoretical position of
                                       the streamline.
         y ^                               /
           |----------------------        V
   Uniform |
   in flow |                                     /
   at Mach |                                  /
   number  |                               /
   1.0     |                            /  \
           |                         /   Outlet boundary is set
           |                      /    to coincide with a
           |----------->-------/      characteristic line.
                       x

   The North boundary is impervious to flow because it is
   located along a streamline (the location of which is
   calculated from Prandtl-Meyer expansion theory). At the exit,
   the pressure is fixed to the constant value that pertains to the
   characteristic line along which the exit boundary is prescribed
   to run. The last row of cells is very thin compared to the
   others to ensure the accuracy of this pressure fixation.

   The grid lines of constant I are set to be coincident with
   the theoretically-calculated locations of the characteristic
   lines. The grid lines of constant J are uniformly spaced, and
   hence must correspond to streamlines.

   The predicted contours of pressure are very close to the
   grid lines of constant I, which demonstrates the ability of
   EARTH to calculate accurately Prandtl-Meyer turning.
  ENDDIS
 ************************************************************
  Group 1. Run Title and Number
 ************************************************************
 ************************************************************
 
 TEXT(PRANDTL-MEYER turning in the X-Y:   B536)
 
 ************************************************************
 ************************************************************
 
 IRUNN = 1 ;LIBREF = 14
 ************************************************************
  Group 2. Time dependence
 STEADY = T
 ************************************************************
  Group 3. X-Direction Grid Spacing
 CARTES = T
 NX = 13
 XULAST =1.
 ************************************************************
  Group 4. Y-Direction Grid Spacing
 NY = 5
 YVLAST =1.
 ************************************************************
  Group 5. Z-Direction Grid Spacing
 PARAB = F
 NZ = 1
 ZWLAST =1.
 ************************************************************
  Group 6. Body-Fitted Coordinates
 BFC = T ;NONORT = T
 NCRT = -1
 RSTGEO = F ;SAVGEO = F
 UUP = F ;VUP = F ;WUP = F
 NGEOM =CHAM
 NAMXYZ =CHAM
 ANGMIN =20.
 DOMAIN(   1,  14,   1,   6,   1,   1)
    * Set fixed sub-domain
 FIXDOM(   1,   0,   0,   0,   0,   0,   0)
 FIXDOM(   2,   0,   0,   0,   0,   0,   0)
 FIXDOM(   3,   0,   0,   0,   0,   0,   0)
 FIXDOM(   4,   0,   0,   0,   0,   0,   0)
 FIXDOM(   5,   0,   0,   0,   0,   0,   0)
 FIXDOM(   6,   0,   0,   0,   0,   0,   0)
 FIXDOM(   7,   0,   0,   0,   0,   0,   0)
 FIXDOM(   8,   0,   0,   0,   0,   0,   0)
 FIXDOM(   9,   0,   0,   0,   0,   0,   0)
 FIXDOM(  10,   0,   0,   0,   0,   0,   0)
 LIJ = F ;LJK = T ;LIK = F
 IMON = 7 ;JMON = 3 ;KMON = 1
 ************************************************************
  Group 7. Variables: STOREd,SOLVEd,NAMEd
 ONEPHS = T
 NAME(1)=P1 ;NAME(3)=U1
 NAME(5)=V1 ;NAME(148)=WCRT
 NAME(149)=VCRT ;NAME(150)=UCRT
    * Y in SOLUTN argument list denotes:
    * 1-stored 2-solved 3-whole-field
    * 4-point-by-point 5-explicit 6-harmonic averaging 
 SOLUTN(P1,Y,Y,N,N,N,Y)
 SOLUTN(U1,Y,Y,N,N,N,Y)
 SOLUTN(V1,Y,Y,N,N,N,Y)
 SOLUTN(WCRT,Y,N,N,N,N,N)
 SOLUTN(VCRT,Y,N,N,N,N,N)
 SOLUTN(UCRT,Y,N,N,N,N,N)
 ************************************************************
  Group 8. Terms & Devices
    * Y in TERMS argument list denotes:
    * 1-built-in source 2-convection 3-diffusion 4-transient
    * 5-first phase variable 6-interphase transport         
 TERMS(P1,Y,Y,Y,N,Y,Y)
 TERMS(U1,Y,Y,Y,Y,Y,Y)
 TERMS(V1,Y,Y,Y,Y,Y,Y)
 DIFCUT =0.5 ;ZDIFAC =1.
 GALA = F ;ADDDIF = F
 NEWRH1 = T
 ISOLX = -1 ;ISOLY = -1 ;ISOLZ = -1
 ************************************************************
  Group 9. Properties used if PRPS is not
  stored, and where PRPS = -1.0 if it is!
 RHO1 = GRND3 ;TMP1 =0.
 EL1 =0.
 TSURR =0. ;TEMP0 =0.
 PRESS0 =0.
 DVO1DT =0. ;DRH1DP =0.
 RHO1A =2.682695E-04 ;RHO1B =0.714286
 RHO1C =0.
 EMISS =0. ;SCATT =0.
 RADIA =0. ;RADIB =0.
 ENUL =1.0E-10 ;ENUT =0.
 PRNDTL(U1)=1. ;PRNDTL(V1)=1.
 PRT(U1)=1. ;PRT(V1)=1.
 CP1 =1. ;CP2 =1.
 ************************************************************
  Group 10.Inter-Phase Transfer Processes
 ************************************************************
  Group 11.Initial field variables (PHIs)
 FIINIT(P1)=5.0E+04 ;FIINIT(U1)=341.565033
 FIINIT(V1)=1.0E-10 ;FIINIT(WCRT)=1.0E-10
 FIINIT(VCRT)=1.0E-10 ;FIINIT(UCRT)=1.0E-10
   No PATCHes yet used for this Group
 INIADD = F
 FSWEEP = 1
 NAMFI =CHAM
 ************************************************************
  Group 12. Patchwise adjustment of terms
  Patches for this group are printed with those
  for Group 13.
  Their names begin either with GP12 or &
 ************************************************************
  Group 13. Boundary & Special Sources
 
 PATCH(INLET ,WEST , 1, 1, 1, 5, 1, 1, 1, 1)
 COVAL(INLET ,P1 , FIXFLU ,216.531235 )
 COVAL(INLET ,U1 ,0. ,341.565033 )
 COVAL(INLET ,V1 ,0. ,0. )
 
 PATCH(OUTLET ,CELL , 13, 13, 1, 5, 1, 1, 1, 1)
 COVAL(OUTLET ,P1 ,1000. ,1.270113E+04 )
 XCYCLE = F
 EGWF = T
 WALLCO = GRND2
 ************************************************************
  Group 14. Downstream Pressure For PARAB
 ************************************************************
  Group 15. Terminate Sweeps
 LSWEEP = 100 ;ISWC1 = 1
 LITHYD = 1 ;LITFLX = 1 ;LITC = 1 ;ITHC1 = 1
 SELREF = T
 RESFAC =1.0E-04
 ************************************************************
  Group 16. Terminate Iterations
 LITER(P1)=20 ;LITER(U1)=10
 LITER(V1)=10
 ENDIT(P1)=1.0E-03 ;ENDIT(U1)=1.0E-03
 ENDIT(V1)=1.0E-03
 ************************************************************
  Group 17. Relaxation
 RELAX(P1,LINRLX,1.)
 RELAX(U1,FALSDT,5.8554E-04)
 RELAX(V1,FALSDT,5.8554E-04)
 RELAX(WCRT,LINRLX,1.)
 RELAX(VCRT,LINRLX,1.)
 RELAX(UCRT,LINRLX,1.)
 OVRRLX =0.
 EXPERT = F ;NNORSL = F
 ************************************************************
  Group 18. Limits
 VARMAX(P1)=1.0E+10 ;VARMIN(P1)=-1.0E+10
 VARMAX(U1)=1.0E+06 ;VARMIN(U1)=-1.0E+06
 VARMAX(V1)=1.0E+06 ;VARMIN(V1)=-1.0E+06
 VARMAX(WCRT)=1.0E+10 ;VARMIN(WCRT)=-1.0E+10
 VARMAX(VCRT)=1.0E+10 ;VARMIN(VCRT)=-1.0E+10
 VARMAX(UCRT)=1.0E+10 ;VARMIN(UCRT)=-1.0E+10
 ************************************************************
  Group 19. Data transmitted to GROUND
 PARSOL = F
 ISG62 = 1
 ************************************************************
  Group 20. Preliminary Printout
 ************************************************************
  Group 21. Print-out of Variables
 INIFLD = F ;SUBWGR = F
    * Y in OUTPUT argument list denotes:
    * 1-field 2-correction-eq. monitor 3-selective dumping      
    * 4-whole-field residual 5-spot-value table 6-residual table
 OUTPUT(P1,Y,N,Y,Y,Y,Y)
 OUTPUT(U1,Y,N,Y,Y,Y,Y)
 OUTPUT(V1,Y,N,Y,Y,Y,Y)
 OUTPUT(WCRT,Y,N,Y,N,N,N)
 OUTPUT(VCRT,Y,N,Y,N,N,N)
 OUTPUT(UCRT,Y,N,Y,N,N,N)
 ************************************************************
  Group 22. Monitor Print-Out
 IXMON = 1 ;IYMON = 3 ;IZMON = 1
 NPRMON = 100000 ;NPRMNT = 1 ;TSTSWP = -1
 UWATCH = T ;USTEER = T
 HIGHLO = F
 ************************************************************
  Group 23.Field Print-Out & Plot Control
 NPRINT = 100000 ;NUMCLS = 5
 NXPRIN = -1 ;IXPRF = 1 ;IXPRL = 10000
 NYPRIN = -1 ;IYPRF = 1 ;IYPRL = 10000
 IPLTF = 1 ;IPLTL = -1 ;NPLT = -1
 ISWPRF = 1 ;ISWPRL = 100000
 ITABL = 3 ;IPROF = 1
 ABSIZ =0.5 ;ORSIZ =0.4
 NTZPRF = 1 ;NCOLPF = 50
 ICHR = 2 ;NCOLCO = 45 ;NROWCO = 20
 
 PATCH(MAP ,CONTUR, 1, 13, 1, 5, 1, 1, 1, 1)
 PLOT(MAP ,P1 ,0. ,20. )
 ************************************************************
  Group 24. Dumps For Restarts
 SAVE = T ;NOWIPE = F
 NSAVE =CHAM
STOP