TALK=T;RUN(1,1)
  DISPLAY

   This case concerns flow entering a sequence of slots.


          \  Approaching fluid
            \
              \|
              -

        -----     -----     -----     -----
             |   |     |   |     |   |
             |   |     |   |     |   |
             |   |     |   |     |   |

   Use of the XCYCLE condition means that only one slot need be
   modelled.

   BFC is needed because the slots hve radiused corners.

   The Q1 contains PHOTON instructions.

  ENDDIS
  PHOTON USE
  p






      gr z 1
      gr z 1 x 1 10 y 1 30 col 4 ; gr z 1 x 31 m y 1 30 col 4
      msg The geometry
      msg Press RETURN for Velocity vectors
      pause
      cl
      gr ou z 1;gr ou z 1 x 1 10 y 1 30; gr ou z 1 x 31 m y 1 30
      vec z 1 sh
      msg Velocity Vectors
      msg Press RETURN for Pressure Contours
      pause
      vec cl;red;con p1 z 1 fi;.0005
      msg Pressure Contours
      msg Press RETURN for contours of Turbulrnt Viscosity
      pause
      con cl;red;con enut z 1 fi;.0005
      msg Press E the RETURN to end
  ENDUSE
 ************************************************************
  Group 1. Run Title and Number
 ************************************************************
 ************************************************************
 
 TEXT(Radiused Slot Entry - Staggered         )
 
 ************************************************************
 ************************************************************
 
 IRUNN = 1 ;LIBREF = 565
 ************************************************************
  Group 2. Time dependence
 STEADY = T
 ************************************************************
  Group 3. X-Direction Grid Spacing
 CARTES = T
 NX = 40
 XULAST =0.05317
 ************************************************************
  Group 4. Y-Direction Grid Spacing
 NY = 50
 YVLAST =0.15
 ************************************************************
  Group 5. Z-Direction Grid Spacing
 PARAB = F
 NZ = 1
 ZWLAST =1.0E-03
 ************************************************************
  Group 6. Body-Fitted Coordinates
 BFC = T ;NONORT = T
 NCRT = -1
 RSTGEO = F ;SAVGEO = F
 UUP = F ;VUP = F ;WUP = F
 NGEOM =CHAM
 NAMXYZ =CHAM
 ANGMIN =20.
 DOMAIN(   1,  41,   1,  51,   1,   1)
    * Set fixed sub-domain
 FIXDOM(   1,   0,   0,   0,   0,   0,   0)
 FIXDOM(   2,   0,   0,   0,   0,   0,   0)
 FIXDOM(   3,   0,   0,   0,   0,   0,   0)
 FIXDOM(   4,   0,   0,   0,   0,   0,   0)
 FIXDOM(   5,   0,   0,   0,   0,   0,   0)
 FIXDOM(   6,   0,   0,   0,   0,   0,   0)
 FIXDOM(   7,   0,   0,   0,   0,   0,   0)
 FIXDOM(   8,   0,   0,   0,   0,   0,   0)
 FIXDOM(   9,   0,   0,   0,   0,   0,   0)
 FIXDOM(  10,   0,   0,   0,   0,   0,   0)
 MSWP = 10
 LIJ = F ;LJK = T ;LIK = F
 IMON = 21 ;JMON = 26 ;KMON = 1
    * X-cyclic boundaries switched
 XCYIZ( 1, T )
 ************************************************************
  Group 7. Variables: STOREd,SOLVEd,NAMEd
 ONEPHS = T
 NAME(1)=P1 ;NAME(3)=U1
 NAME(5)=V1 ;NAME(12)=KE
 NAME(13)=EP ;NAME(142)=EPKE
 NAME(144)=WCRT ;NAME(145)=VCRT
 NAME(146)=UCRT ;NAME(147)=PRPS
 NAME(148)=PCOR ;NAME(149)=LEN1
 NAME(150)=ENUT
    * Y in SOLUTN argument list denotes:
    * 1-stored 2-solved 3-whole-field
    * 4-point-by-point 5-explicit 6-harmonic averaging 
 SOLUTN(P1,Y,Y,Y,N,N,Y)
 SOLUTN(U1,Y,Y,N,N,N,Y)
 SOLUTN(V1,Y,Y,N,N,N,Y)
 SOLUTN(KE,Y,Y,N,N,N,N)
 SOLUTN(EP,Y,Y,N,N,N,N)
 SOLUTN(EPKE,Y,N,N,N,N,N)
 SOLUTN(WCRT,Y,N,N,N,N,N)
 SOLUTN(VCRT,Y,N,N,N,N,N)
 SOLUTN(UCRT,Y,N,N,N,N,N)
 SOLUTN(PRPS,Y,N,N,N,N,Y)
 SOLUTN(PCOR,Y,N,N,N,N,Y)
 SOLUTN(LEN1,Y,N,N,N,N,Y)
 SOLUTN(ENUT,Y,N,N,N,N,Y)
 VIST = 150
 LEN1 = 149
 PCOR = 148
 PRPS = 147
 ************************************************************
  Group 8. Terms & Devices
    * Y in TERMS argument list denotes:
    * 1-built-in source 2-convection 3-diffusion 4-transient
    * 5-first phase variable 6-interphase transport         
 TERMS(P1,Y,Y,Y,N,Y,Y)
 TERMS(U1,Y,Y,Y,Y,Y,Y)
 TERMS(V1,Y,Y,Y,Y,Y,Y)
 TERMS(KE,N,Y,Y,Y,Y,N)
 TERMS(EP,N,Y,Y,Y,Y,N)
 DIFCUT =0.5 ;ZDIFAC =1.
 GALA = F ;ADDDIF = F
 NEWENT = T
 ISOLX = -1 ;ISOLY = -1 ;ISOLZ = -1
 ************************************************************
  Group 9. Properties used if PRPS is not
  stored, and where PRPS = -1.0 if it is!
 RHO1 =1.189 ;TMP1 =0.
 EL1 = GRND4
 TSURR =0. ;TEMP0 =0.
 PRESS0 =0.
 DVO1DT =0. ;DRH1DP =0.
 EMISS =0. ;SCATT =0.
 RADIA =0. ;RADIB =0.
 EL1A =0. ;EL1B =0.
 EL1C =0.
 ENUL =1.0E-05 ;ENUT = GRND3
 ENUTA =0. ;ENUTB =0.
 ENUTC =0.
 IENUTA = 0
 PRNDTL(U1)=1. ;PRNDTL(V1)=1.
 PRNDTL(KE)=1. ;PRNDTL(EP)=1.
 PRT(U1)=1. ;PRT(V1)=1.
 PRT(KE)=1. ;PRT(EP)=1.314
 CP1 =1005. ;CP2 =1.
 ************************************************************
  Group 10.Inter-Phase Transfer Processes
 ************************************************************
  Group 11.Initial field variables (PHIs)
 FIINIT(P1)=1.0E-10 ;FIINIT(U1)=1.0E-10
 FIINIT(V1)=1.0E-10 ;FIINIT(KE)=0.1152
 FIINIT(EP)=11.94 ;FIINIT(EPKE)=1.0E-10
 FIINIT(WCRT)=1.0E-10 ;FIINIT(VCRT)=1.0E-10
 FIINIT(UCRT)=1.0E-10 ;FIINIT(PRPS)=-1.
 FIINIT(PCOR)=1.0E-10 ;FIINIT(LEN1)=1.0E-10
 FIINIT(ENUT)=1.0E-10
 
 PATCH(B1 ,INIVAL, 1, 10, 1, 30, 1, 1, 1, 1)
 INIT(B1 ,PRPS,0. ,198. )
 
 PATCH(B2 ,INIVAL, 31, 40, 1, 30, 1, 1, 1, 1)
 INIT(B2 ,PRPS,0. ,198. )
 INIADD = F
 FSWEEP = 1
 NAMFI =CHAM
 ************************************************************
  Group 12. Patchwise adjustment of terms
  Patches for this group are printed with those
  for Group 13.
  Their names begin either with GP12 or &
 ************************************************************
  Group 13. Boundary & Special Sources
 
 PATCH(KESOURCE,PHASEM, 0, 0, 0, 0, 0, 0, 1, 1)
 COVAL(KESOURCE,KE , GRND4 , GRND4 )
 COVAL(KESOURCE,EP , GRND4 , GRND4 )
 
 PATCH(BFCIN ,NORTH , 1, 40, 50, 50, 1, 1, 1, 1)
 COVAL(BFCIN ,P1 , FIXFLU , GRND1 )
 COVAL(BFCIN ,U1 ,0. , GRND1 )
 COVAL(BFCIN ,V1 ,0. , GRND1 )
 COVAL(BFCIN ,KE ,0. ,0.1152 )
 COVAL(BFCIN ,EP ,0. ,11.94 )
 COVAL(BFCIN ,VCRT,0. ,-24. )
 COVAL(BFCIN ,UCRT,0. ,93. )
 
 PATCH(OUT ,SOUTH , 11, 30, 1, 1, 1, 1, 1, 1)
 COVAL(OUT ,P1 ,1000. ,0. )
 COVAL(OUT ,U1 ,0. ,0. )
 COVAL(OUT ,V1 ,0. ,0. )
 COVAL(OUT ,KE ,0. ,0.1152 )
 COVAL(OUT ,EP ,0. ,11.94 )
 XCYCLE = T
 EGWF = T
 WALLCO = GRND2
 BFCA =1.189
 ************************************************************
  Group 14. Downstream Pressure For PARAB
 ************************************************************
  Group 15. Terminate Sweeps
 LSWEEP = 300 ;ISWC1 = 1
 LITHYD = 1 ;LITFLX = 1 ;LITC = 1 ;ITHC1 = 1
 SELREF = T
 RESFAC =1.0E-04
 ************************************************************
  Group 16. Terminate Iterations
 LITER(P1)=20 ;LITER(U1)=10
 LITER(V1)=10 ;LITER(KE)=20
 LITER(EP)=20
 ENDIT(P1)=1.0E-03 ;ENDIT(U1)=1.0E-03
 ENDIT(V1)=1.0E-03 ;ENDIT(KE)=1.0E-03
 ENDIT(EP)=1.0E-03
 ************************************************************
  Group 17. Relaxation
 RELAX(P1,LINRLX,0.2)
 RELAX(U1,FALSDT,1.0E-04)
 RELAX(V1,FALSDT,1.0E-04)
 RELAX(KE,LINRLX,0.2)
 RELAX(EP,LINRLX,0.2)
 RELAX(EPKE,LINRLX,1.)
 RELAX(WCRT,LINRLX,1.)
 RELAX(VCRT,LINRLX,1.)
 RELAX(UCRT,LINRLX,1.)
 RELAX(PRPS,LINRLX,1.)
 RELAX(PCOR,LINRLX,1.)
 RELAX(LEN1,LINRLX,1.)
 RELAX(ENUT,LINRLX,1.)
 KELIN = 3
 OVRRLX =0.
 EXPERT = F ;NNORSL = F
 ************************************************************
  Group 18. Limits
 VARMAX(P1)=1.0E+10 ;VARMIN(P1)=-1.0E+10
 VARMAX(U1)=1.0E+06 ;VARMIN(U1)=-1.0E+06
 VARMAX(V1)=1.0E+06 ;VARMIN(V1)=-1.0E+06
 VARMAX(KE)=1.0E+10 ;VARMIN(KE)=1.0E-10
 VARMAX(EP)=1.0E+10 ;VARMIN(EP)=1.0E-10
 VARMAX(EPKE)=1.0E+10 ;VARMIN(EPKE)=-1.0E+10
 VARMAX(WCRT)=1.0E+10 ;VARMIN(WCRT)=-1.0E+10
 VARMAX(VCRT)=1.0E+10 ;VARMIN(VCRT)=-1.0E+10
 VARMAX(UCRT)=1.0E+10 ;VARMIN(UCRT)=-1.0E+10
 VARMAX(PRPS)=1.0E+10 ;VARMIN(PRPS)=-1.0E+10
 VARMAX(PCOR)=1.0E+10 ;VARMIN(PCOR)=-1.0E+10
 VARMAX(LEN1)=1.0E+10 ;VARMIN(LEN1)=-1.0E+10
 VARMAX(ENUT)=1.0E+10 ;VARMIN(ENUT)=-1.0E+10
 ************************************************************
  Group 19. Data transmitted to GROUND
 GENK = T
 SYMBFC = T
 PARSOL = F
 ISG62 = 1
 SPEDAT(SET,MATERIAL,198,L,T)
 ************************************************************
  Group 20. Preliminary Printout
 ************************************************************
  Group 21. Print-out of Variables
 INIFLD = F ;SUBWGR = F
    * Y in OUTPUT argument list denotes:
    * 1-field 2-correction-eq. monitor 3-selective dumping      
    * 4-whole-field residual 5-spot-value table 6-residual table
 OUTPUT(P1,Y,N,Y,Y,Y,Y)
 OUTPUT(U1,Y,N,Y,Y,Y,Y)
 OUTPUT(V1,Y,N,Y,Y,Y,Y)
 OUTPUT(KE,Y,N,Y,Y,Y,Y)
 OUTPUT(EP,Y,N,Y,Y,Y,Y)
 OUTPUT(EPKE,Y,N,Y,N,N,N)
 OUTPUT(WCRT,Y,N,Y,N,N,N)
 OUTPUT(VCRT,Y,N,Y,N,N,N)
 OUTPUT(UCRT,Y,N,Y,N,N,N)
 OUTPUT(PRPS,Y,N,Y,N,N,N)
 OUTPUT(PCOR,Y,N,Y,N,N,N)
 OUTPUT(LEN1,Y,N,Y,N,N,N)
 OUTPUT(ENUT,Y,N,Y,N,N,N)
 ************************************************************
  Group 22. Monitor Print-Out
 IXMON = 20 ;IYMON = 25 ;IZMON = 1
 NPRMON = 100000 ;NPRMNT = 1 ;TSTSWP = -1
 UWATCH = T ;USTEER = T
 HIGHLO = F
 ************************************************************
  Group 23.Field Print-Out & Plot Control
 NPRINT = 100000 ;NUMCLS = 5
 NXPRIN = 1 ;IXPRF = 1 ;IXPRL = 10000
 NYPRIN = 1 ;IYPRF = 1 ;IYPRL = 10000
 IPLTF = 1 ;IPLTL = -1 ;NPLT = -1
 ISWPRF = 1 ;ISWPRL = 100000
 ITABL = 1 ;IPROF = 1
 ABSIZ =0.5 ;ORSIZ =0.4
 NTZPRF = 1 ;NCOLPF = 50
 ICHR = 2 ;NCOLCO = 45 ;NROWCO = 20
   No PATCHes yet used for this Group
 ************************************************************
  Group 24. Dumps For Restarts
 SAVE = T ;NOWIPE = F
 NSAVE =CHAM
STOP