TALK=T;RUN(1,1)
  photon use
  p;p5; ;x5

  view x 1
  msg pressure contours on ix=1 and vectors
  gr ou x 1;con p1 x 1 fi;0.001;vec x 1
  pause;con off;vec off;view y 1
  msg pressure contours on iy=1 and vectors
  gr ou y 1;con p1 y 1 fi;0.001;vec y 1
  pause;con off;vec off;view z 1
  msg pressure contours on iz=1 and vectors
  gr ou z 1;con p1 z 1 fi;0.001;vec z 1
  enduse
  DISPLAY

  This case tests the moving-BFC features of PHOENICS by simulating
  the flows within an expanding (or contracting) box-shaped cavity
  with impervious (or pervious) walls.

  The fluid is compressible; and, since the grid velocity is small
  compared with the sound speed and the expansion is uniform in all
  directions, the fluid moves with the grid.

  Numbers of time steps, and intervals in the x, y and z directions
  may be entered interactively.


  Provision is also made for:
  * changing the specific-heat ratio, via GAMA,
  * changing the speed of movement via TLAST, and
  * the directions of movement, via RSG8, RSG10 and RSG12;
  * and for opening the moving surfaces, so that the fluid remains
    substantially at rest.

  ENDDIS
 ************************************************************
  Group 1. Run Title and Number
 ************************************************************
 ************************************************************
 
 TEXT(Moving-bfc test; grid distortion   :b965)
 
 ************************************************************
 ************************************************************
 
 IRUNN = 1 ;LIBREF = 90
 ************************************************************
  Group 2. Time dependence
 STEADY = F
    * Set overall time and no. of steps
 TFIRST =0. ;TLAST =0.1
 FSTEP = 1 ;LSTEP = 5
 TFRAC(1)=0.2 ;TFRAC(2)=0.4
 TFRAC(3)=0.6 ;TFRAC(4)=0.8
 TFRAC(5)=1.
 ************************************************************
  Group 3. X-Direction Grid Spacing
 CARTES = T
 NX = 5
 XULAST =1.
 ************************************************************
  Group 4. Y-Direction Grid Spacing
 NY = 5
 YVLAST =1.
 ************************************************************
  Group 5. Z-Direction Grid Spacing
 PARAB = F
 NZ = 5
 ZWLAST =1.
 ************************************************************
  Group 6. Body-Fitted Coordinates
 BFC = T ;NONORT = F
 NCRT = -1
 RSTGEO = F ;SAVGEO = F
 UUP = F ;VUP = F ;WUP = F
 NGEOM =CHAM
 NAMXYZ =CHAM
 MOVBFC = T
 SETBFC = T
 ANGMIN =20.
 DOMAIN(   1,   6,   1,   6,   1,   6)
    * Set fixed sub-domain
 FIXDOM(   1,   0,   0,   0,   0,   0,   0)
 FIXDOM(   2,   0,   0,   0,   0,   0,   0)
 FIXDOM(   3,   0,   0,   0,   0,   0,   0)
 FIXDOM(   4,   0,   0,   0,   0,   0,   0)
 FIXDOM(   5,   0,   0,   0,   0,   0,   0)
 FIXDOM(   6,   0,   0,   0,   0,   0,   0)
 FIXDOM(   7,   0,   0,   0,   0,   0,   0)
 FIXDOM(   8,   0,   0,   0,   0,   0,   0)
 FIXDOM(   9,   0,   0,   0,   0,   0,   0)
 FIXDOM(  10,   0,   0,   0,   0,   0,   0)
 LIJ = F ;LJK = T ;LIK = F
 ************************************************************
  Group 7. Variables: STOREd,SOLVEd,NAMEd
 ONEPHS = T
 NAME(1)=P1 ;NAME(3)=U1
 NAME(5)=V1 ;NAME(7)=W1
 NAME(144)=WCRT ;NAME(145)=VCRT
 NAME(146)=UCRT ;NAME(147)=VOLU
 NAME(148)=CONK ;NAME(149)=CONJ
 NAME(150)=CONI
    * Y in SOLUTN argument list denotes:
    * 1-stored 2-solved 3-whole-field
    * 4-point-by-point 5-explicit 6-harmonic averaging 
 SOLUTN(P1,Y,Y,Y,N,N,Y)
 SOLUTN(U1,Y,Y,Y,N,N,Y)
 SOLUTN(V1,Y,Y,Y,N,N,Y)
 SOLUTN(W1,Y,Y,Y,N,N,Y)
 SOLUTN(WCRT,Y,N,N,N,N,N)
 SOLUTN(VCRT,Y,N,N,N,N,N)
 SOLUTN(UCRT,Y,N,N,N,N,N)
 SOLUTN(VOLU,Y,N,N,N,N,Y)
 SOLUTN(CONK,Y,N,N,N,N,Y)
 SOLUTN(CONJ,Y,N,N,N,N,Y)
 SOLUTN(CONI,Y,N,N,N,N,Y)
 ************************************************************
  Group 8. Terms & Devices
    * Y in TERMS argument list denotes:
    * 1-built-in source 2-convection 3-diffusion 4-transient
    * 5-first phase variable 6-interphase transport         
 TERMS(P1,Y,Y,Y,N,Y,Y)
 TERMS(U1,Y,Y,Y,Y,Y,Y)
 TERMS(V1,Y,Y,Y,Y,Y,Y)
 TERMS(W1,Y,Y,Y,Y,Y,Y)
 DIFCUT =0.5 ;ZDIFAC =1.
 GALA = F ;ADDDIF = F
 NEWRH1 = T
 UCONV = T
 ISOLX = -1 ;ISOLY = -1 ;ISOLZ = -1
 ************************************************************
  Group 9. Properties used if PRPS is not
  stored, and where PRPS = -1.0 if it is!
 RHO1 = GRND3 ;TMP1 =0.
 EL1 =0.
 TSURR =0. ;TEMP0 =0.
 PRESS0 =1.0E+05
 DVO1DT =0. ;DRH1DP = GRND3
 RHO1A =2.682695E-04 ;RHO1B =0.714286
 RHO1C =0.
 EMISS =0. ;SCATT =0.
 RADIA =0. ;RADIB =0.
 ENUL =1.0E-05 ;ENUT =0.
 PRNDTL(U1)=1. ;PRNDTL(V1)=1.
 PRNDTL(W1)=1.
 PRT(U1)=1. ;PRT(V1)=1.
 PRT(W1)=1.
 CP1 =1. ;CP2 =1.
 ************************************************************
  Group 10.Inter-Phase Transfer Processes
 ************************************************************
  Group 11.Initial field variables (PHIs)
 FIINIT(P1)=0. ;FIINIT(U1)=0.
 FIINIT(V1)=0. ;FIINIT(W1)=0.
 FIINIT(WCRT)=1.0E-10 ;FIINIT(VCRT)=1.0E-10
 FIINIT(UCRT)=1.0E-10 ;FIINIT(VOLU)=1.0E-10
 FIINIT(CONK)=0. ;FIINIT(CONJ)=0.
 FIINIT(CONI)=0.
   No PATCHes yet used for this Group
 INIADD = F
 FSWEEP = 1
 NAMFI =CHAM
 ************************************************************
  Group 12. Patchwise adjustment of terms
  Patches for this group are printed with those
  for Group 13.
  Their names begin either with GP12 or &
 ************************************************************
  Group 13. Boundary & Special Sources
   No PATCHes yet used for this Group
 XCYCLE = F
 EGWF = T
 WALLCO = GRND2
 ************************************************************
  Group 14. Downstream Pressure For PARAB
 ************************************************************
  Group 15. Terminate Sweeps
 LSWEEP = 50 ;ISWC1 = 1
 LITHYD = 1 ;LITFLX = 1 ;LITC = 1 ;ITHC1 = 1
 SELREF = T
 RESFAC =1.0E-02
 ************************************************************
  Group 16. Terminate Iterations
 LITER(P1)=50 ;LITER(U1)=10
 LITER(V1)=10 ;LITER(W1)=10
 ENDIT(P1)=1.0E-03 ;ENDIT(U1)=1.0E-03
 ENDIT(V1)=1.0E-03 ;ENDIT(W1)=1.0E-03
 ************************************************************
  Group 17. Relaxation
 RELAX(P1,LINRLX,0.5)
 RELAX(U1,FALSDT,1.0E-03)
 RELAX(V1,FALSDT,1.0E-03)
 RELAX(W1,FALSDT,1.0E-03)
 RELAX(WCRT,LINRLX,1.)
 RELAX(VCRT,LINRLX,1.)
 RELAX(UCRT,LINRLX,1.)
 RELAX(VOLU,LINRLX,1.)
 RELAX(CONK,LINRLX,1.)
 RELAX(CONJ,LINRLX,1.)
 RELAX(CONI,LINRLX,1.)
 OVRRLX =0.
 EXPERT = F ;NNORSL = F
 ************************************************************
  Group 18. Limits
 VARMAX(P1)=1.0E+10 ;VARMIN(P1)=-1.0E+10
 VARMAX(U1)=1.0E+06 ;VARMIN(U1)=-1.0E+06
 VARMAX(V1)=1.0E+06 ;VARMIN(V1)=-1.0E+06
 VARMAX(W1)=1.0E+06 ;VARMIN(W1)=-1.0E+06
 VARMAX(WCRT)=1.0E+10 ;VARMIN(WCRT)=-1.0E+10
 VARMAX(VCRT)=1.0E+10 ;VARMIN(VCRT)=-1.0E+10
 VARMAX(UCRT)=1.0E+10 ;VARMIN(UCRT)=-1.0E+10
 VARMAX(VOLU)=1.0E+10 ;VARMIN(VOLU)=-1.0E+10
 VARMAX(CONK)=1.0E+10 ;VARMIN(CONK)=-1.0E+10
 VARMAX(CONJ)=1.0E+10 ;VARMIN(CONJ)=-1.0E+10
 VARMAX(CONI)=1.0E+10 ;VARMIN(CONI)=-1.0E+10
 ************************************************************
  Group 19. Data transmitted to GROUND
 PARSOL = F
 ISG62 = 1
 SPEDAT(SET,GRIDS,CASE,C,BOX)
 SPEDAT(SET,GRIDS,XCMIN,R,0.)
 SPEDAT(SET,GRIDS,XCMAX,R,1.)
 SPEDAT(SET,GRIDS,YCMIN,R,0.)
 SPEDAT(SET,GRIDS,YCMAX,R,2.)
 SPEDAT(SET,GRIDS,ZCMIN,R,0.)
 SPEDAT(SET,GRIDS,ZCMAX,R,3.)
 SPEDAT(SET,GRIDS,TFCXMX,R,1.1)
 SPEDAT(SET,GRIDS,TFCXMN,R,1.)
 SPEDAT(SET,GRIDS,TFCYMX,R,1.1)
 SPEDAT(SET,GRIDS,TFCYMN,R,1.)
 SPEDAT(SET,GRIDS,TFCZMX,R,1.1)
 SPEDAT(SET,GRIDS,TFCZMN,R,1.)
 SPEDAT(SET,GRIDS,DXCDZC,R,0.)
 SPEDAT(SET,GRIDS,DYCDXC,R,0.)
 SPEDAT(SET,GRIDS,DYCDZC,R,0.)
 SPEDAT(SET,GXMONI,TRANSIENT,L,F)
 ************************************************************
  Group 20. Preliminary Printout
 ************************************************************
  Group 21. Print-out of Variables
 INIFLD = F ;SUBWGR = F
    * Y in OUTPUT argument list denotes:
    * 1-field 2-correction-eq. monitor 3-selective dumping      
    * 4-whole-field residual 5-spot-value table 6-residual table
 OUTPUT(P1,Y,Y,Y,Y,Y,Y)
 OUTPUT(U1,Y,Y,Y,Y,Y,Y)
 OUTPUT(V1,Y,Y,Y,Y,Y,Y)
 OUTPUT(W1,Y,Y,Y,Y,Y,Y)
 OUTPUT(WCRT,Y,N,Y,N,N,N)
 OUTPUT(VCRT,Y,N,Y,N,N,N)
 OUTPUT(UCRT,Y,N,Y,N,N,N)
 OUTPUT(VOLU,Y,N,Y,N,N,N)
 OUTPUT(CONK,Y,N,Y,N,N,N)
 OUTPUT(CONJ,Y,N,Y,N,N,N)
 OUTPUT(CONI,Y,N,Y,N,N,N)
 ************************************************************
  Group 22. Monitor Print-Out
 IXMON = 2 ;IYMON = 2 ;IZMON = 2
 NPRMON = 100000 ;NPRMNT = 1 ;TSTSWP = -1
 UWATCH = T ;USTEER = T
 HIGHLO = F
 ************************************************************
  Group 23.Field Print-Out & Plot Control
 NPRINT = 100000 ;NUMCLS = 5
 NTPRIN = 100000 ;ISTPRF = 1 ;ISTPRL = 100000
 NXPRIN = -1 ;IXPRF = 1 ;IXPRL = 10000
 NYPRIN = -1 ;IYPRF = 1 ;IYPRL = 10000
 NZPRIN = -1 ;IZPRF = 1 ;IZPRL = 10000
 XZPR = T ;YZPR = F
 IPLTF = 3 ;IPLTL = -1 ;NPLT = 1
 ISWPRF = 1 ;ISWPRL = 100000
 ITABL = 1 ;IPROF = 1
 ABSIZ =0.5 ;ORSIZ =0.4
 NTZPRF = 1 ;NCOLPF = 50
 ICHR = 2 ;NCOLCO = 45 ;NROWCO = 20
 
 PATCH(LONGPLOT,PROFIL, 1, 5, 1, 1, 1, 1, 1, 5)
 PLOT(LONGPLOT,P1 ,0. ,0. )
 PLOT(LONGPLOT,U1 ,0. ,0. )
 ************************************************************
  Group 24. Dumps For Restarts
 SAVE = T ;NOWIPE = F
 NSAVE =CHAM
 IDISPA = 1 ;IDISPB = 0 ;IDISPC = 0
 CSG1    ='PHI'
 CSG2    ='XYZ'
STOP