TALK=T;RUN(1,1)
  PHOTON USE
  p




  use patgeo
  text
  1
  1
  Vapour mass fraction
   0.22368E+04 0.26119E+04 CR
  con vapo z 1 fill
  0.01
  text
  3

  Press  to continue
   0.20368E+04 0.44265E+03 CR
  pause
  con cl
  text cl
  red
  text
  1
  1
  Velocity vectors
   0.22368E+04 0.24817E+04 CR
  set vec ref
  40
  vec z 1
  text
  1
  5
  Particle trajectories
   0.22368E+04 0.23514E+04 CR
  use genuse
  text cl
  vec off
  con off
  text
  3

  Press  to continue
   0.20368E+04 0.44265E+03 CR
  pause
  red
  text
  1
  5
  Particle trajectories
   0.22368e+04 0.24817E+04 CR
  GEOMETRY READ
  T00001
  GEOMETRY READ
  T00002
  GEOMETRY READ
  T00003
  GEOMETRY READ
  T00004
  GEOMETRY READ
  T00005
  GEOMETRY READ
  T00006
  GEOMETRY READ
  T00007
  GEOMETRY READ
  T00008
  text
  3

  Press  to continue
   0.20368E+04 0.44265E+03 CR
  pause
  text cl
  red
  text
  1
  1
  Mass deposited by particles
   0.21368E+04 0.23514E+04 CR
  con mass z 1 fill
  0.005
  text
  3

  Press e to end
   0.22368E+04 0.44265E+03 CR
  enduse
  DISPLAY
  Evaporating particles in spray dryer (BFC)
  ENDDIS
  
    60
  *__XP__YP__UP__VP__DIAM_LIQDEN_FRATE_TEMP_(NUMB)
   0.2  3.20E+00  9.04E+00  8.06E+00  6.0E-05  1000.  5.E-05   300.
   0.2  3.20E+00  7.36E+00  3.18E+00  1.1E-04  1000.  5.E-05   300.
   0.2  3.20E+00  6.60E+00  6.47E+00  1.1E-04  1000.  5.E-05   300.
   0.2  3.20E+00  4.68E+00  5.64E+00  1.1E-04  1000.  5.E-05   300.
   0.2  3.20E+00  9.04E+00 -1.06E+00  0.7E-04  1000.  5.E-05   300.
   0.2  3.20E+00  4.68E+00 -1.64E+00  1.1E-04  1000.  5.E-05   300.
   0.2  3.20E+00  6.60E+00 -6.47E+00  1.1E-04  1000.  5.E-05   300.
   0.2  3.20E+00  7.36E+00 -3.18E+00  1.1E-04  1000.  5.E-05   300.
  
 ************************************************************
  Group 1. Run Title and Number
 ************************************************************
 ************************************************************
 
 TEXT(Evapor. particl.in spray dryer:G505     )
 
 ************************************************************
 ************************************************************
 
 IRUNN = 1 ;LIBREF = 505
 ************************************************************
  Group 2. Time dependence
 STEADY = T
 ************************************************************
  Group 3. X-Direction Grid Spacing
 CARTES = T
 NX = 18
 XULAST =1.
 ************************************************************
  Group 4. Y-Direction Grid Spacing
 NY = 26
 YVLAST =1.
 ************************************************************
  Group 5. Z-Direction Grid Spacing
 PARAB = F
 NZ = 1
 ZWLAST =1.
 ************************************************************
  Group 6. Body-Fitted Coordinates
 BFC = T ;NONORT = T
 NCRT = 1
 RSTGEO = F ;SAVGEO = F
 UUP = F ;VUP = F ;WUP = F
 NGEOM =CHAM
 NAMXYZ =CHAM
 ANGMIN =20.
 DOMAIN(   1,  19,  23,  27,   1,   1)
    * Set fixed sub-domain
 FIXDOM(   1,   0,   0,   0,   0,   0,   0)
 FIXDOM(   2,   0,   0,   0,   0,   0,   0)
 FIXDOM(   3,   0,   0,   0,   0,   0,   0)
 FIXDOM(   4,   0,   0,   0,   0,   0,   0)
 FIXDOM(   5,   0,   0,   0,   0,   0,   0)
 FIXDOM(   6,   0,   0,   0,   0,   0,   0)
 FIXDOM(   7,   0,   0,   0,   0,   0,   0)
 FIXDOM(   8,   0,   0,   0,   0,   0,   0)
 FIXDOM(   9,   0,   0,   0,   0,   0,   0)
 FIXDOM(  10,   0,   0,   0,   0,   0,   0)
 LIJ = F ;LJK = T ;LIK = F
 IMON = 10 ;JMON = 25 ;KMON = 1
 ************************************************************
  Group 7. Variables: STOREd,SOLVEd,NAMEd
 ONEPHS = T
 NAME(1)=P1 ;NAME(3)=U1
 NAME(5)=V1 ;NAME(14)=H1
 NAME(21)=VAPO ;NAME(136)=PRPS
 NAME(137)=NPOR ;NAME(138)=EPOR
 NAME(139)=MOMY ;NAME(140)=MOMX
 NAME(142)=TDEC ;NAME(143)=SPH1
 NAME(144)=TMP1 ;NAME(145)=MASS
 NAME(146)=HEAT ;NAME(147)=DEN1
 NAME(148)=WCRT ;NAME(149)=VCRT
 NAME(150)=UCRT
    * Y in SOLUTN argument list denotes:
    * 1-stored 2-solved 3-whole-field
    * 4-point-by-point 5-explicit 6-harmonic averaging 
 SOLUTN(P1,Y,Y,N,N,N,Y)
 SOLUTN(U1,Y,Y,N,N,N,Y)
 SOLUTN(V1,Y,Y,N,N,N,Y)
 SOLUTN(H1,Y,Y,N,N,N,Y)
 SOLUTN(VAPO,Y,Y,N,N,N,Y)
 SOLUTN(PRPS,Y,N,N,N,N,N)
 SOLUTN(NPOR,Y,N,N,N,N,Y)
 SOLUTN(EPOR,Y,N,N,N,N,Y)
 SOLUTN(MOMY,Y,N,N,N,N,Y)
 SOLUTN(MOMX,Y,N,N,N,N,Y)
 SOLUTN(TDEC,Y,N,N,N,N,N)
 SOLUTN(SPH1,Y,N,N,N,N,Y)
 SOLUTN(TMP1,Y,N,N,N,N,Y)
 SOLUTN(MASS,Y,N,N,N,N,Y)
 SOLUTN(HEAT,Y,N,N,N,N,Y)
 SOLUTN(DEN1,Y,N,N,N,N,Y)
 SOLUTN(WCRT,Y,N,N,N,N,Y)
 SOLUTN(VCRT,Y,N,N,N,N,Y)
 SOLUTN(UCRT,Y,N,N,N,N,Y)
 DEN1 = 147
 EPOR = 138 ;HPOR = 0 ;NPOR = 137 ;VPOR = 0
 TEMP1 = 144
 PRPS = 136
 ************************************************************
  Group 8. Terms & Devices
    * Y in TERMS argument list denotes:
    * 1-built-in source 2-convection 3-diffusion 4-transient
    * 5-first phase variable 6-interphase transport         
 TERMS(P1,Y,Y,Y,N,Y,Y)
 TERMS(U1,Y,Y,Y,Y,Y,Y)
 TERMS(V1,Y,Y,Y,Y,Y,Y)
 TERMS(H1,Y,Y,Y,Y,Y,Y)
 TERMS(VAPO,N,Y,Y,Y,N,Y)
 DIFCUT =0.5 ;ZDIFAC =1.
 GALA = F ;ADDDIF = F
 NEWRH1 = T
 ISOLX = -1 ;ISOLY = -1 ;ISOLZ = -1
 ************************************************************
  Group 9. Properties used if PRPS is not
  stored, and where PRPS = -1.0 if it is!
 RHO1 = GRND5 ;TMP1 = GRND2
 EL1 =0.
 TSURR =0. ;TEMP0 =0.
 PRESS0 =1.01325E+05
 DVO1DT =0. ;DRH1DP = GRND5
 RHO1A =0. ;RHO1B =3.53002E-03
 RHO1C =0.714
 TMP1A =0. ;TMP1B =0.
 TMP1C =0.
 TMP2A =0. ;TMP2B =0.
 TMP2C =0.
 EMISS =0. ;SCATT =0.
 RADIA =0. ;RADIB =0.
 ENUL =1.451613E-05 ;ENUT =0.014516
 PRNDTL(U1)=1. ;PRNDTL(V1)=1.
 PRNDTL(H1)=0.71 ;PRNDTL(VAPO)=1.
 PRT(U1)=1. ;PRT(V1)=1.
 PRT(H1)=1. ;PRT(VAPO)=1.
 CP1 =1005. ;CP2 =1.
 ************************************************************
  Group 10.Inter-Phase Transfer Processes
 ************************************************************
  Group 11.Initial field variables (PHIs)
 FIINIT(P1)=1.0E-10 ;FIINIT(U1)=1.0E-10
 FIINIT(V1)=1.0E-10 ;FIINIT(H1)=4.75365E+05
 FIINIT(VAPO)=0. ;FIINIT(PRPS)=-1.
 FIINIT(NPOR)=1. ;FIINIT(EPOR)=1.
 FIINIT(MOMY)=1.0E-10 ;FIINIT(MOMX)=1.0E-10
 FIINIT(TDEC)=1.0E-10 ;FIINIT(SPH1)=1.0E-10
 FIINIT(TMP1)=473. ;FIINIT(MASS)=1.0E-10
 FIINIT(HEAT)=1.0E-10 ;FIINIT(DEN1)=0.7374
 FIINIT(WCRT)=1.0E-10 ;FIINIT(VCRT)=1.0E-10
 FIINIT(UCRT)=1.0E-10
 
 PATCH(CMP0 ,INIVAL, 1, 3, 16, 16, 1, 1, 1, 1)
 INIT(CMP0 ,PRPS,0. ,199. )
 INIADD = F
 FSWEEP = 1
 NAMFI =CHAM
 ************************************************************
  Group 12. Patchwise adjustment of terms
  Patches for this group are printed with those
  for Group 13.
  Their names begin either with GP12 or &
 ************************************************************
  Group 13. Boundary & Special Sources
 
 PATCH(INLET ,NORTH , 1, 3, 26, 26, 1, 1, 1, 1)
 COVAL(INLET ,P1 , FIXFLU ,14.748 )
 COVAL(INLET ,U1 ,0. ,0. )
 COVAL(INLET ,V1 ,0. ,-20. )
 COVAL(INLET ,H1 ,0. ,4.75365E+05 )
 COVAL(INLET ,VAPO,0. ,0. )
 
 PATCH(GXOUT ,SOUTH , 1, 7, 1, 1, 1, 1, 1, 1)
 COVAL(GXOUT ,P1 ,1. ,0. )
 COVAL(GXOUT ,U1 ,0. , SAME )
 COVAL(GXOUT ,V1 ,0. , SAME )
 COVAL(GXOUT ,H1 ,0. , SAME )
 COVAL(GXOUT ,VAPO,0. , SAME )
 
 PATCH(GENPAT ,CELL , 1, 18, 1, 26, 1, 1, 1, 1)
 COVAL(GENPAT ,U1 , FIXFLU , GRND )
 COVAL(GENPAT ,V1 , FIXFLU , GRND )
 COVAL(GENPAT ,H1 , FIXFLU , GRND )
 COVAL(GENPAT ,VAPO, FIXFLU , GRND )
 
 PATCH(GENMAS ,CELL , 1, 18, 1, 26, 1, 1, 1, 1)
 COVAL(GENMAS ,P1 , FIXFLU , GRND )
 XCYCLE = F
 EGWF = T
 WALLCO = GRND2
 ************************************************************
  Group 14. Downstream Pressure For PARAB
 ************************************************************
  Group 15. Terminate Sweeps
 LSWEEP = 500 ;ISWC1 = 1
 LITHYD = 1 ;LITFLX = 1 ;LITC = 1 ;ITHC1 = 1
 SELREF = T
 RESFAC =1.0E-04
 ************************************************************
  Group 16. Terminate Iterations
 LITER(P1)=20 ;LITER(U1)=1
 LITER(V1)=1 ;LITER(H1)=20
 LITER(VAPO)=20
 ENDIT(P1)=1.0E-03 ;ENDIT(U1)=1.0E-03
 ENDIT(V1)=1.0E-03 ;ENDIT(H1)=1.0E-03
 ENDIT(VAPO)=1.0E-03
 ************************************************************
  Group 17. Relaxation
 RELAX(P1,LINRLX,0.3)
 RELAX(U1,FALSDT,0.1)
 RELAX(V1,FALSDT,0.1)
 RELAX(H1,FALSDT,0.1)
 RELAX(VAPO,FALSDT,0.5)
 RELAX(PRPS,LINRLX,1.)
 RELAX(MOMY,LINRLX,0.1)
 RELAX(MOMX,LINRLX,0.1)
 RELAX(TDEC,LINRLX,1.)
 RELAX(SPH1,LINRLX,1.)
 RELAX(TMP1,LINRLX,1.)
 RELAX(MASS,LINRLX,0.1)
 RELAX(HEAT,LINRLX,0.1)
 RELAX(DEN1,LINRLX,1.)
 RELAX(WCRT,LINRLX,1.)
 RELAX(VCRT,LINRLX,1.)
 RELAX(UCRT,LINRLX,1.)
 OVRRLX =0.
 EXPERT = F ;NNORSL = F
 ************************************************************
  Group 18. Limits
 VARMAX(P1)=1.0E+10 ;VARMIN(P1)=-1.0E+10
 VARMAX(U1)=1.0E+06 ;VARMIN(U1)=-1.0E+06
 VARMAX(V1)=1.0E+06 ;VARMIN(V1)=-1.0E+06
 VARMAX(H1)=1.0E+10 ;VARMIN(H1)=-1.0E+10
 VARMAX(VAPO)=1. ;VARMIN(VAPO)=0.
 VARMAX(PRPS)=1.0E+10 ;VARMIN(PRPS)=-1.0E+10
 VARMAX(NPOR)=1.0E+10 ;VARMIN(NPOR)=-1.0E+10
 VARMAX(EPOR)=1.0E+10 ;VARMIN(EPOR)=-1.0E+10
 VARMAX(MOMY)=1.0E+10 ;VARMIN(MOMY)=-1.0E+10
 VARMAX(MOMX)=1.0E+10 ;VARMIN(MOMX)=-1.0E+10
 VARMAX(TDEC)=1.0E+10 ;VARMIN(TDEC)=-1.0E+10
 VARMAX(SPH1)=1.0E+10 ;VARMIN(SPH1)=-1.0E+10
 VARMAX(TMP1)=1.0E+10 ;VARMIN(TMP1)=-1.0E+10
 VARMAX(MASS)=1.0E+10 ;VARMIN(MASS)=-1.0E+10
 VARMAX(HEAT)=1.0E+10 ;VARMIN(HEAT)=-1.0E+10
 VARMAX(DEN1)=1.0E+10 ;VARMIN(DEN1)=-1.0E+10
 VARMAX(WCRT)=1.0E+10 ;VARMIN(WCRT)=-1.0E+10
 VARMAX(VCRT)=1.0E+10 ;VARMIN(VCRT)=-1.0E+10
 VARMAX(UCRT)=1.0E+10 ;VARMIN(UCRT)=-1.0E+10
 ************************************************************
  Group 19. Data transmitted to GROUND
 PARSOL = F
 ISG62 = 1
 SPEDAT(SET,STORED,TDEC,C,=TMP1-273.15!ZSLFIN)
 SPEDAT(SET,PROPERTY,RHO1,C,=(P1+1.01325E+05)/((175.2*VAPO+286.7)*$)
 SPEDAT(SET,PROPERTY,RHO1,C,TMP1)!IMAT<100)
 SPEDAT(SET,PROPERTY,CP1,C,=(1910.*VAPO+1005.*(1-VAPO))!IMAT<100)
 SPEDAT(SET,PROPERTY,TMP1,C,=(H1/(1910.*VAPO+1005.*(1.-VAPO)))!IMA$)
 SPEDAT(SET,PROPERTY,TMP1,C,T<100)
 SPEDAT(SET,MATERIAL,199,L,T)
 IG( 9) = 10
 IG( 10) = 1
 IG( 11) = 20
 IG( 12) = 1
 IG( 14) = 10
 IG( 15) = 2500
 IG( 16) = 5
 IG( 17) = 1
 IG( 18) = 50
 IG( 19) = 3
 IG( 20) = 60
 RG( 51) =5.
 RG( 52) =5000.
 RG( 53) =8.0E-03
 RG( 54) =4.52
 RG( 55) =5.2
 RG( 56) =4.
 RG( 57) =3.02
 RG( 71) = GRND1
 RG( 72) =4131.799805
 RG( 73) =2.0E-07
 RG( 74) = GRND1
 RG( 75) = GRND1
 RG( 76) = GRND1
 RG( 77) =1.
 RG( 80) =4.0E-04
 RG( 82) = GRND1
 RG( 83) =5.
 RG( 84) =1.
 RG( 86) =18.
 RG( 87) =29.
 RG( 88) = GRND1
 RG( 89) =1005.
 RG( 90) = GRND1
 RG( 91) = GRND1
 RG( 92) =273.149994
 RG( 93) =1.
 RG( 94) =3.335E+05
 RG( 95) = GRND1
 RG( 96) =0.0263
 RG( 97) = GRND1
 RG( 99) =-9.8
 CG(  6) ='GHIS'
 CG(  7) ='NONE'
 CG(  8) ='Q1'
 CG(  9) ='H'
 CG( 10) ='T'
 ************************************************************
  Group 20. Preliminary Printout
 DISTIL = T ;NULLPR = F
 NDST = 0
 DSTTOL =1.0E-02
 EX(P1)=34.689999 ;EX(U1)=0.8482
 EX(V1)=5.525 ;EX(H1)=4.321E+05
 EX(VAPO)=0.01922 ;EX(PRPS)=0.
 EX(NPOR)=0.9936 ;EX(EPOR)=0.9936
 EX(MOMY)=1.78E-05 ;EX(MOMX)=6.394E-06
 EX(TDEC)=151.300003 ;EX(SPH1)=1016.
 EX(TMP1)=422.700012 ;EX(MASS)=8.816E-07
 EX(HEAT)=1.512 ;EX(DEN1)=0.818
 EX(WCRT)=0.04218 ;EX(VCRT)=5.47
 EX(UCRT)=0.8428
 ************************************************************
  Group 21. Print-out of Variables
 INIFLD = F ;SUBWGR = F
    * Y in OUTPUT argument list denotes:
    * 1-field 2-correction-eq. monitor 3-selective dumping      
    * 4-whole-field residual 5-spot-value table 6-residual table
 OUTPUT(P1,Y,N,Y,Y,Y,Y)
 OUTPUT(U1,Y,N,Y,Y,Y,Y)
 OUTPUT(V1,Y,N,Y,Y,Y,Y)
 OUTPUT(H1,Y,N,Y,Y,Y,Y)
 OUTPUT(VAPO,Y,N,Y,Y,Y,Y)
 OUTPUT(PRPS,Y,N,Y,N,N,N)
 OUTPUT(NPOR,Y,N,Y,N,N,N)
 OUTPUT(EPOR,Y,N,Y,N,N,N)
 OUTPUT(MOMY,Y,N,Y,N,N,N)
 OUTPUT(MOMX,Y,N,Y,N,N,N)
 OUTPUT(TDEC,Y,N,Y,N,N,N)
 OUTPUT(SPH1,Y,N,Y,N,N,N)
 OUTPUT(TMP1,Y,N,Y,Y,Y,Y)
 OUTPUT(MASS,Y,N,Y,N,N,N)
 OUTPUT(HEAT,Y,N,Y,N,N,N)
 OUTPUT(DEN1,Y,N,Y,N,N,N)
 OUTPUT(WCRT,Y,N,Y,N,N,N)
 OUTPUT(VCRT,Y,N,Y,N,N,N)
 OUTPUT(UCRT,Y,N,Y,N,N,N)
 ************************************************************
  Group 22. Monitor Print-Out
 IXMON = 9 ;IYMON = 13 ;IZMON = 0
 NPRMON = 100000 ;NPRMNT = 1 ;TSTSWP = -1
 UWATCH = T ;USTEER = T
 HIGHLO = F
 ************************************************************
  Group 23.Field Print-Out & Plot Control
 NPRINT = 100000 ;NUMCLS = 5
 NXPRIN = -1 ;IXPRF = 1 ;IXPRL = 10000
 NYPRIN = -1 ;IYPRF = 1 ;IYPRL = 10000
 IPLTF = 1 ;IPLTL = -1 ;NPLT = -1
 ISWPRF = 1 ;ISWPRL = 100000
 ITABL = 3 ;IPROF = 1
 ABSIZ =0.5 ;ORSIZ =0.4
 NTZPRF = 1 ;NCOLPF = 50
 ICHR = 2 ;NCOLCO = 45 ;NROWCO = 20
   No PATCHes yet used for this Group
 ************************************************************
  Group 24. Dumps For Restarts
 SAVE = T ;NOWIPE = F
 NSAVE =CHAM
STOP