TALK=T;RUN( 1, 1)
 
 ************************************************************
   Q1 created by VDI menu, Version 3.5, Date 16/12/02
 CPVNAM=VDI;SPPNAM=Core
 ************************************************************
  PHOTON USE
    p; ; ; ; ;
 
 
   cl;gr ou z 1
   msg Contours of temperature T1
   con tem1 z 1 fi;0.005 ; pause
   pause
   cl;gr ou z 1
   msg Contours of coefficients APCO:
   con apt1 k 1 fi;0.005
   pause
   cl;gr ou z 1
   msg Contours of coefficients AECO:
   con aet1 k 1 fi;0.005
   pause
   cl;gr ou z 1
   msg Contours of coefficients AWCO:
   con awt1 k 1 fi;0.005
   pause
   cl;gr ou z 1
   msg Contours of coefficients ANCO:
   con ant1 k 1 fi;0.005
   pause
   cl;gr ou z 1
   msg Contours of coefficients ASCO:
   con ast1 k 1 fi;0.005
   pause
   cl;gr ou z 1
   msg Contours of residuals of temperature RES:
   con tres k 1 fi;0.005
   DUMP
   FILE
   pause
   cl;gr ou z 1
   msg Contours of temperature corrections CORR:
   con tcor k 1 fi;0.005
   pause
 
   AUTOPLOT
   file
   phi 5
   aphi 2
 
   data 1 tem1 y 1
   col3 1
   data 1 tem1 y 3
   colf 2
   data 2 dist anal
   BLB4 3
   REDR
   dump f301_3
   msg Tem1 at y=1 Blue ; at y=3 Red ;Analytic solution  Crosses
 
  ENDUSE
  Echo DISPLAY / USE settings
  DISPLAY
  This case uses the geometry and finer grid volumes of F301.
 
  Temperatures at opposite boundaries along x-direction is
  fixed as boundary conditions. Uniform heat generation
  is defined for whole volume. The analytic solution is
 
  T(x) =((T2-T1)/L (q/(2*K))*L-x)+T1
         at x=0 T=T1 ; at x=L T=T2
 
  where q is uniform heat gerneration (W), L is the distance.
 
  In-Form facility is used for printing coefficients, residuals
  and corrections and extinction coeffieint.
 
  PHOTON use is available. AUTOPLOT is used to show the comparison
  of the analytic and PHOENICS solution. Save following table file 
  as aphi to use autoplot, then copy it to working directory.

   ----------- aphi ------
        DIST       Anal
   5.000E-01  2.062E+03
   1.500E+00  2.138E+03
   2.500E+00  2.146E+03
   3.500E+00  2.088E+03
   4.500E+00  1.962E+03
   5.500E+00  1.771E+03
   6.500E+00  1.512E+03
   7.500E+00  1.188E+03
   ----------- aphi ------
  ENDDIS

 ************************************************************
 IRUNN   =         1 ;LIBREF =         314
 ************************************************************
  Group 1. Run Title
 TEXT(F311 FOR X-Z PLANE )
 ************************************************************
  Group 2. Transience
 STEADY  =    T
 ************************************************************
  Groups 3, 4, 5  Grid Information
    * Overall number of cells, RSET(M,NX,NY,NZ,tolerance)
 RSET(M,8,6,1,1.000000E+01)
 ************************************************************
  Group 6. Body-Fitted coordinates
 ************************************************************
  Group 7. Variables: STOREd,SOLVEd,NAMEd
 ONEPHS  =    T
    * Non-default variable names
 NAME(141) =TCOR ; NAME(142) =TRES
 NAME(143) =GAT1 ; NAME(144) =AST1
 NAME(145) =ANT1 ; NAME(146) =AWT1
 NAME(147) =AET1 ; NAME(148) =APT1
 NAME(149) =TEM1 ; NAME(150) =PRPS
    * Solved variables list
 SOLVE(TEM1)
    * Stored variables list
 STORE(PRPS,APT1,AET1,AWT1,ANT1,AST1,GAT1,TRES)
 STORE(TCOR)
    * Additional solver options
 SOLUTN(TEM1,Y,Y,Y,N,N,Y)
 
 ************************************************************
  Echo InForm settings for Group  7
  inform7begin
     ** temperature equation coefficients
(STORED of APT1 is APCO(TEM1))
(STORED of AET1 is AECO(TEM1))
(STORED of AWT1 is AWCO(TEM1))
(STORED of ANT1 is ANCO(TEM1))
(STORED of AST1 is ASCO(TEM1))
 
   ** Exchange coefficients of  TEM1, temperature
(STORED of GAt1 is GAMM(TEM1))
     ** Print-out residuals of temperature
(STORED of TRES is RESI(TEM1))
 
     ** Print-out of temperature corrections
(STORED of TCOR is CORR(TEM1))
 
  inform7end
 ************************************************************
  Group 8. Terms & Devices
 ************************************************************
  Group 9. Properties
 PRESS0  = 1.000000E+05
 RHO1    = 1.000000E+00
 ENUL    = 1.500000E-02
 CP1     = 1.000000E+00
 ENUT    = 0.000000E+00
 PRNDTL(TEM1) =  1.000000E+00
 ************************************************************
  Group 10.Inter-Phase Transfer Processes
 ************************************************************
  Group 11.Initialise Var/Porosity Fields
 FIINIT(PRPS) = -1.000000E+00
   No PATCHes used for this Group
 
 
 INIADD  =    F
 ************************************************************
  Group 12. Convection and diffusion adjustments
   No PATCHes used for this Group
 ************************************************************
  Group 13. Boundary & Special Sources
 
 PATCH (WHOLE   ,VOLUME,1,8,1,6,1,1,1,1)
 COVAL (WHOLE   ,TEM1, FIXFLU      , 1.000000E+00)
 
 ************************************************************
  Group 14. Downstream Pressure For PARAB
 ************************************************************
  Group 15. Terminate Sweeps
 LSWEEP  =       100
 RESFAC  = 1.000000E-03
 ************************************************************
  Group 16. Terminate Iterations
 LITER (TEM1) =      100
 ************************************************************
  Group 17. Relaxation
 ************************************************************
  Group 18. Limits
 ************************************************************
  Group 19. EARTH Calls To GROUND Station
 USEGRD  =    T  ;USEGRX =    T
 ASAP    =    T
 ************************************************************
  Group 20. Preliminary Printout
 ECHO    =    T
 EX(TCOR)=   4.287E-05  ; EX(TRES)=   2.922E-02  
 EX(GAT1)=   1.500E-02  ; EX(AST1)=   1.250E-02  
 EX(ANT1)=   1.250E-02  ; EX(AWT1)=   1.312E-02  
 EX(AET1)=   1.312E-02  ; EX(APT1)=   7.500E-03  
 EX(TEM1)=   1.865E+03  ; EX(PRPS)=   1.000E+00  
 ************************************************************
  Group 21. Print-out of Variables
 ************************************************************
  Group 22. Monitor Print-Out
 NPRMON  =    100000
 NPRMNT  =         1
 TSTSWP  =        -1
 ************************************************************
  Group 23.Field Print-Out & Plot Control
 NPRINT  =    100000
 ISWPRF  =         1 ;ISWPRL =    100000
   No PATCHes used for this Group
 ************************************************************
  Group 24. Dumps For Restarts
 
 GVIEW(P,0.000000E+00,-1.079619E-02,9.999417E-01)
 GVIEW(UP,0.000000E+00,9.999417E-01,1.079619E-02)
 
> DOM,    SIZE,        8.000000E+00, 6.000000E+00, 1.000000E+00
> DOM,    MONIT,       5.000000E-01, 5.000000E-01, 5.000000E-01
> DOM,    SCALE,       1.000000E+00, 1.000000E+00, 1.000000E+00
> DOM,    SNAPSIZE,    1.000000E-02
 
> OBJ,    NAME,        B1
> OBJ,    POSITION,    0.000000E+00, 0.000000E+00, 0.000000E+00
> OBJ,    SIZE,        0.000000E+00, 6.000000E+00, 1.000000E+00
> OBJ,    CLIPART,     cube3t
> OBJ,    ROTATION24,        1
> OBJ,    TYPE,        INLET
> OBJ,    PRESSURE,      0.000000E+00
> OBJ,    VELOCITY,      0.000000E+00, 0.000000E+00, 0.000000E+00
> OBJ,    TEMPERATURE,   0.000000E+00
 
> OBJ,    NAME,        OUTLET
> OBJ,    POSITION,    8.000000E+00, 0.000000E+00, 0.000000E+00
> OBJ,    SIZE,        0.000000E+00, 6.000000E+00, 1.000000E+00
> OBJ,    CLIPART,     cube12t
> OBJ,    ROTATION24,        1
> OBJ,    VISIBLE,          -1
> OBJ,    TYPE,        OUTLET
> OBJ,    PRESSURE,      0.000000E+00
> OBJ,    TEMPERATURE,   SAME
> OBJ,    COEFFICIENT,   1.000000E+03
 
> OBJ,    NAME,        B3
> OBJ,    POSITION,    0.000000E+00, 0.000000E+00, 0.000000E+00
> OBJ,    SIZE,        8.000000E+00, 0.000000E+00, 1.000000E+00
> OBJ,    CLIPART,     cube11
> OBJ,    ROTATION24,        1
> OBJ,    TYPE,        PLATE
 
> OBJ,    NAME,        B4
> OBJ,    POSITION,    0.000000E+00, 6.000000E+00, 0.000000E+00
> OBJ,    SIZE,        8.000000E+00, 0.000000E+00, 1.000000E+00
> OBJ,    CLIPART,     cube11
> OBJ,    ROTATION24,        1
> OBJ,    TYPE,        PLATE
 
> OBJ,    NAME,        B5
> OBJ,    POSITION,    2.000000E+00, 2.000000E+00, 0.000000E+00
> OBJ,    SIZE,        4.000000E+00, 2.000000E+00, 1.000000E+00
> OBJ,    CLIPART,     fine
> OBJ,    ROTATION24,        1
> OBJ,    TYPE,        FINE_GRID_VOL
> OBJ,    FINEFACTS,     6.000000E+00, 6.000000E+00, 1.000000E+00
 
> OBJ,    NAME,        B6
> OBJ,    POSITION,    3.000000E+00, 2.500000E+00, 0.000000E+00
> OBJ,    SIZE,        2.000000E+00, 1.000000E+00, 1.000000E+00
> OBJ,    CLIPART,     fine
> OBJ,    ROTATION24,        1
> OBJ,    TYPE,        FINE_GRID_VOL
> OBJ,    FINEFACTS,     6.000000E+00, 6.000000E+00, 1.000000E+00
 
> OBJ,    NAME,        B7
> OBJ,    POSITION,    8.000000E+00, 0.000000E+00, 0.000000E+00
> OBJ,    SIZE,        0.000000E+00, 6.000000E+00, 1.000000E+00
> OBJ,    CLIPART,     cube13
> OBJ,    ROTATION24,        1
> OBJ,    TYPE,        PLATE
> OBJ,    SURF_TEMP,     0.000000E+00, 1.000000E+03
 
> OBJ,    NAME,        B8
> OBJ,    POSITION,    0.000000E+00, 0.000000E+00, 0.000000E+00
> OBJ,    SIZE,        0.000000E+00, 6.000000E+00, 1.000000E+00
> OBJ,    CLIPART,     cube13
> OBJ,    ROTATION24,        1
> OBJ,    TYPE,        PLATE
> OBJ,    SURF_TEMP,     0.000000E+00, 2.000000E+03
  SINGLE SWEEP SOLUTION
integer(icase)
icase=2
if(icase.eq.2) then
LSWEEP  =         1
RELAX(TEM1,LINRLX, 1.0000)
LITER (TEM1) =        1
spedat(set,fgmb_itr,tem1,i,10000)
endif
STOP