TALK=T;RUN(1,1)
  DISPLAY
   This test  case  concerns  simulation  of  the   salinity
   propagation  through  incoming  flow  of fresh water (see
   picture below). That  kind of flow  may arise in  the sea
   bays pollution simulations.
      
     <= Mixture                                    
                                                 <= Fresh
    => Salted water                                 water
      

   User can  investigate the influence  of the  salted water
   velocity (VSIN) and fresh water  pressure (PFRSH)  values
   on the  developing flow pattern  and the distance of salt
   propagation.

   User can switch from the default colocated  computational
   algorithm (CCM)  to the  staggered one  (STAG) by setting
   LCCM= F.
  ----------------------------------------------------------
  ENDDIS
  PHOTON USE
   p ; ; ; ; ;

   vi x
   msg Computational Domain:
   rot 90
   gr i 4
   msg Press Any Key to Continue...
   pause
   cl
   set vec av off
   msg Velocity Vectors:
   vec i 4 sh
   msg Press Any Key to Continue...
   pause
   cl
   msg Contours of Pressure:
   con p1 i 4 fi;0.001
   pause
   cl
   msg Contours of Salinity:
   con SALT i 4 fi;0.001
   msg Press E  to exit PHOTON ...
  ENDUSE
  SCHMBEGIN
      VARNAM VC1  SCHEME MINMOD
      VARNAM WC1  SCHEME MINMOD
      VARNAM SALT SCHEME MINMOD
  SCHMEND
 ************************************************************
  Group 1. Run Title and Number
 ************************************************************
 ************************************************************
 
 TEXT(CCM : Salted water flow.                )
 
 ************************************************************
 ************************************************************
 
 IRUNN = 1 ;LIBREF = 150
 ************************************************************
  Group 2. Time dependence
 STEADY = F
    * Set overall time and no. of steps
 TFIRST =0. ;TLAST =9.
 FSTEP = 1 ;LSTEP = 30
 TFRAC(1)=0.033333 ;TFRAC(2)=0.066667
 TFRAC(3)=0.1 ;TFRAC(4)=0.133333
 TFRAC(5)=0.166667 ;TFRAC(6)=0.2
 TFRAC(7)=0.233333 ;TFRAC(8)=0.266667
 TFRAC(9)=0.3 ;TFRAC(10)=0.333333
 TFRAC(11)=0.366667 ;TFRAC(12)=0.4
 TFRAC(13)=0.433333 ;TFRAC(14)=0.466667
 TFRAC(15)=0.5 ;TFRAC(16)=0.533333
 TFRAC(17)=0.566667 ;TFRAC(18)=0.6
 TFRAC(19)=0.633333 ;TFRAC(20)=0.666667
 TFRAC(21)=0.7 ;TFRAC(22)=0.733333
 TFRAC(23)=0.766667 ;TFRAC(24)=0.8
 TFRAC(25)=0.833333 ;TFRAC(26)=0.866667
 TFRAC(27)=0.9 ;TFRAC(28)=0.933333
 TFRAC(29)=0.966667 ;TFRAC(30)=1.
 ************************************************************
  Group 3. X-Direction Grid Spacing
 CARTES = T
 NX = 6
 XULAST =0.2
 ************************************************************
  Group 4. Y-Direction Grid Spacing
 NY = 14
 YVLAST =0.7
 ************************************************************
  Group 5. Z-Direction Grid Spacing
 PARAB = F
 NZ = 10
 ZWLAST =0.1
 ************************************************************
  Group 6. Body-Fitted Coordinates
 BFC = T ;NONORT = F
 NCRT = -1
 RSTGEO = F ;SAVGEO = F
 UUP = F ;VUP = F ;WUP = F
 NGEOM =CHAM
 NAMXYZ =CHAM
 ANGMIN =20.
 DOMAIN(   1,   7,  15,  15,   1,  11)
    * Set fixed sub-domain
 FIXDOM(   1,   0,   0,   0,   0,   0,   0)
 FIXDOM(   2,   0,   0,   0,   0,   0,   0)
 FIXDOM(   3,   0,   0,   0,   0,   0,   0)
 FIXDOM(   4,   0,   0,   0,   0,   0,   0)
 FIXDOM(   5,   0,   0,   0,   0,   0,   0)
 FIXDOM(   6,   0,   0,   0,   0,   0,   0)
 FIXDOM(   7,   0,   0,   0,   0,   0,   0)
 FIXDOM(   8,   0,   0,   0,   0,   0,   0)
 FIXDOM(   9,   0,   0,   0,   0,   0,   0)
 FIXDOM(  10,   0,   0,   0,   0,   0,   0)
 LIJ = F ;LJK = T ;LIK = F
 IMON = 4 ;JMON = 15 ;KMON = 6
 CCM = T
 ************************************************************
  Group 7. Variables: STOREd,SOLVEd,NAMEd
 ONEPHS = T
 NAME(1)=P1 ;NAME(3)=U1
 NAME(5)=V1 ;NAME(7)=W1
 NAME(14)=SALT ;NAME(145)=WC1
 NAME(146)=VC1 ;NAME(147)=UC1
 NAME(148)=WCRT ;NAME(149)=VCRT
 NAME(150)=UCRT
    * Y in SOLUTN argument list denotes:
    * 1-stored 2-solved 3-whole-field
    * 4-point-by-point 5-explicit 6-harmonic averaging 
 SOLUTN(P1,Y,Y,Y,N,N,N)
 SOLUTN(U1,Y,Y,N,N,N,Y)
 SOLUTN(V1,Y,Y,N,N,N,Y)
 SOLUTN(W1,Y,Y,N,N,N,Y)
 SOLUTN(SALT,Y,Y,Y,N,N,Y)
 SOLUTN(WC1,Y,Y,Y,N,N,Y)
 SOLUTN(VC1,Y,Y,Y,N,N,Y)
 SOLUTN(UC1,Y,Y,Y,N,N,Y)
 SOLUTN(WCRT,Y,N,N,N,N,N)
 SOLUTN(VCRT,Y,N,N,N,N,N)
 SOLUTN(UCRT,Y,N,N,N,N,N)
 ************************************************************
  Group 8. Terms & Devices
    * Y in TERMS argument list denotes:
    * 1-built-in source 2-convection 3-diffusion 4-transient
    * 5-first phase variable 6-interphase transport         
 TERMS(P1,Y,Y,Y,N,Y,Y)
 TERMS(U1,N,N,N,N,N,N)
 TERMS(V1,N,N,N,N,N,N)
 TERMS(W1,N,N,N,N,N,N)
 TERMS(SALT,N,Y,Y,Y,Y,Y)
 TERMS(WC1,N,Y,Y,Y,N,Y)
 TERMS(VC1,N,Y,Y,Y,Y,Y)
 TERMS(UC1,N,Y,Y,Y,N,Y)
 DIFCUT =0.5 ;ZDIFAC =1.
 GALA = F ;ADDDIF = F
 NEWRH1 = T
 HUNIT =1.
 ISOLX = -1 ;ISOLY = -1 ;ISOLZ = -1
 ************************************************************
  Group 9. Properties used if PRPS is not
  stored, and where PRPS = -1.0 if it is!
 RHO1 = GRND1 ;TMP1 =0.
 EL1 =0.
 TSURR =0. ;TEMP0 =0.
 PRESS0 =0.
 DVO1DT =0. ;DRH1DP =0.
 RHO1A =1000. ;RHO1B =0.8
 RHO1C =0.
 EMISS =0. ;SCATT =0.
 RADIA =0. ;RADIB =0.
 ENUL =1.0E-05 ;ENUT =0.
 PRNDTL(SALT)=1000. ;PRNDTL(WC1)=1.
 PRNDTL(VC1)=1. ;PRNDTL(UC1)=1.
 PRT(SALT)=1. ;PRT(WC1)=1.
 PRT(VC1)=1. ;PRT(UC1)=1.
 CP1 =1. ;CP2 =1.
 ************************************************************
  Group 10.Inter-Phase Transfer Processes
 ************************************************************
  Group 11.Initial field variables (PHIs)
 FIINIT(P1)=1.0E-10 ;FIINIT(U1)=1.0E-10
 FIINIT(V1)=1.0E-10 ;FIINIT(W1)=1.0E-10
 FIINIT(SALT)=10. ;FIINIT(WC1)=1.0E-05
 FIINIT(VC1)=1.0E-05 ;FIINIT(UC1)=1.0E-05
 FIINIT(WCRT)=1.0E-10 ;FIINIT(VCRT)=1.0E-10
 FIINIT(UCRT)=1.0E-10
   No PATCHes yet used for this Group
 INIADD = F
 FSWEEP = 1
 NAMFI =CHAM
 ************************************************************
  Group 12. Patchwise adjustment of terms
  Patches for this group are printed with those
  for Group 13.
  Their names begin either with GP12 or &
 ************************************************************
  Group 13. Boundary & Special Sources
 
 PATCH(NORR ,NORTH , 1, 6, 14, 14, 1, 5, 1, 30)
 COVAL(NORR ,P1 ,10. ,0. )
 COVAL(NORR ,SALT,0. , SAME )
 COVAL(NORR ,WC1 ,0. , SAME )
 COVAL(NORR ,VC1 ,0. , SAME )
 COVAL(NORR ,UC1 ,0. , SAME )
 
 PATCH(NORRL ,NORTH , 1, 6, 14, 14, 6, 10, 1, 30)
 COVAL(NORRL ,P1 ,1.0E-20 ,3.0E+22 )
 COVAL(NORRL ,SALT,0. ,50. )
 COVAL(NORRL ,WC1 ,0. , SAME )
 COVAL(NORRL ,VC1 ,0. , SAME )
 COVAL(NORRL ,UC1 ,0. , SAME )
 
 PATCH(SYD ,SOUTH , 1, 6, 1, 1, 1, 10, 1, 30)
 COVAL(SYD ,P1 ,1000. ,200. )
 COVAL(SYD ,SALT,0. ,10. )
 COVAL(SYD ,WC1 ,0. , SAME )
 COVAL(SYD ,VC1 ,0. , SAME )
 COVAL(SYD ,UC1 ,0. , SAME )
 
 PATCH(BOTFRI ,HWALL , 1, 6, 1, 14, 10, 10, 1, 30)
 COVAL(BOTFRI ,WC1 ,1. ,0. )
 COVAL(BOTFRI ,VC1 ,1. ,0. )
 COVAL(BOTFRI ,UC1 ,1. ,0. )
 XCYCLE = F
 EGWF = T
 WALLCO = GRND2
 BUOYA =0. ; BUOYB =0.
 BUOYC =9.81
 BUOYE =1008.
 ************************************************************
  Group 14. Downstream Pressure For PARAB
 ************************************************************
  Group 15. Terminate Sweeps
 LSWEEP = 40 ;ISWC1 = 1
 LITHYD = 1 ;LITFLX = 1 ;LITC = 1 ;ITHC1 = 1
 SELREF = T
 RESFAC =1.0E-06
 ************************************************************
  Group 16. Terminate Iterations
 LITER(P1)=20 ;LITER(U1)=10
 LITER(V1)=10 ;LITER(W1)=10
 LITER(SALT)=20 ;LITER(WC1)=5
 LITER(VC1)=5 ;LITER(UC1)=5
 ENDIT(P1)=1.0E-03 ;ENDIT(U1)=1.0E-03
 ENDIT(V1)=1.0E-03 ;ENDIT(W1)=1.0E-03
 ENDIT(SALT)=1.0E-03 ;ENDIT(WC1)=1.0E-03
 ENDIT(VC1)=1.0E-03 ;ENDIT(UC1)=1.0E-03
 ************************************************************
  Group 17. Relaxation
 RELAX(P1,LINRLX,0.5)
 RELAX(U1,FALSDT,1.)
 RELAX(V1,FALSDT,1.)
 RELAX(W1,FALSDT,1.)
 RELAX(SALT,FALSDT,0.025)
 RELAX(WC1,FALSDT,0.025)
 RELAX(VC1,FALSDT,0.025)
 RELAX(UC1,FALSDT,0.025)
 RELAX(WCRT,LINRLX,1.)
 RELAX(VCRT,LINRLX,1.)
 RELAX(UCRT,LINRLX,1.)
 OVRRLX =0.
 EXPERT = F ;NNORSL = F
 ************************************************************
  Group 18. Limits
 VARMAX(P1)=1.0E+10 ;VARMIN(P1)=-1.0E+10
 VARMAX(U1)=1.0E+06 ;VARMIN(U1)=-1.0E+06
 VARMAX(V1)=1.0E+06 ;VARMIN(V1)=-1.0E+06
 VARMAX(W1)=1.0E+06 ;VARMIN(W1)=-1.0E+06
 VARMAX(SALT)=1.0E+10 ;VARMIN(SALT)=-1.0E+10
 VARMAX(WC1)=1.0E+10 ;VARMIN(WC1)=-1.0E+10
 VARMAX(VC1)=1.0E+10 ;VARMIN(VC1)=-1.0E+10
 VARMAX(UC1)=1.0E+10 ;VARMIN(UC1)=-1.0E+10
 VARMAX(WCRT)=1.0E+10 ;VARMIN(WCRT)=-1.0E+10
 VARMAX(VCRT)=1.0E+10 ;VARMIN(VCRT)=-1.0E+10
 VARMAX(UCRT)=1.0E+10 ;VARMIN(UCRT)=-1.0E+10
 ************************************************************
  Group 19. Data transmitted to GROUND
 PARSOL = F
 CONWIZ = T
 LSG4 = T
 ISG62 = 1
 CSG3    ='LCRU'
 SPEDAT(SET,GXMONI,TRANSIENT,L,F)
 ************************************************************
  Group 20. Preliminary Printout
 ************************************************************
  Group 21. Print-out of Variables
 INIFLD = F ;SUBWGR = F
    * Y in OUTPUT argument list denotes:
    * 1-field 2-correction-eq. monitor 3-selective dumping      
    * 4-whole-field residual 5-spot-value table 6-residual table
 OUTPUT(P1,Y,N,Y,Y,Y,Y)
 OUTPUT(U1,Y,N,Y,Y,Y,Y)
 OUTPUT(V1,Y,N,Y,Y,Y,Y)
 OUTPUT(W1,Y,N,Y,Y,Y,Y)
 OUTPUT(SALT,Y,N,Y,Y,Y,Y)
 OUTPUT(WC1,Y,N,Y,Y,Y,Y)
 OUTPUT(VC1,Y,N,Y,Y,Y,Y)
 OUTPUT(UC1,Y,N,Y,Y,Y,Y)
 OUTPUT(WCRT,Y,N,Y,N,N,N)
 OUTPUT(VCRT,Y,N,Y,N,N,N)
 OUTPUT(UCRT,Y,N,Y,N,N,N)
 ************************************************************
  Group 22. Monitor Print-Out
 IXMON = 4 ;IYMON = 8 ;IZMON = 6
 NPRMON = 100000 ;NPRMNT = 1 ;TSTSWP = -1
 UWATCH = T ;USTEER = T
 HIGHLO = F
 ************************************************************
  Group 23.Field Print-Out & Plot Control
 NPRINT = 100000 ;NUMCLS = 5
 NTPRIN = 100000 ;ISTPRF = 1 ;ISTPRL = 100000
 NXPRIN = -1 ;IXPRF = 1 ;IXPRL = 10000
 NYPRIN = -1 ;IYPRF = 1 ;IYPRL = 10000
 NZPRIN = -1 ;IZPRF = 1 ;IZPRL = 10000
 XZPR = F ;YZPR = F
 IPLTF = 1 ;IPLTL = -1 ;NPLT = -1
 ISWPRF = 1 ;ISWPRL = 100000
 ITABL = 3 ;IPROF = 1
 ABSIZ =0.5 ;ORSIZ =0.4
 NTZPRF = 1 ;NCOLPF = 50
 ICHR = 2 ;NCOLCO = 45 ;NROWCO = 20
   No PATCHes yet used for this Group
 ************************************************************
  Group 24. Dumps For Restarts
 SAVE = T ;NOWIPE = F
 NSAVE =CHAM
STOP