TALK=T;RUN(1,1)
  photon use
  p




  up y
  msg the grid. press return for temperature contours
  gr z 1;pause; gr off;red;gr ou z 1
  msg temperature contours. press return for velocity vectors
  con tem1 z 1 fi;0.0002;pause; con off;red;se re ve 2;vec z 1 sh
  msg velocity vectors. press return for reduced-pressure contours
  pause;vec off;red;con p1 z 1 fi;0.0002
  enduse
  DISPLAY
  This case is a illustratiom of the Colocated-Covariant
  Method (CCM). The geometry is with two inlets at differents
  temperatures. Both sides walls are symetry planes. The
  velocities difference and the temperatures entail a
  recirculation zone behind the solid edge.

  The solid conductivity is temperature dependent:
                 lenda=14.17+6.25E-3 T
                 (T in K)
  The kinematic viscosity of air follows the Sutherland law.

  ENDDIS
  DISPLAY
  Geometry:                 outlet
  --------
                        P1=P2=1.013E5 Pa

                       |               |               ^ H2=0.1 m
                       |               |               |
                       |               |               |
                       |               |               |
                       |               |               |
                       |               |               |
                       |    |\         |               - H1=0.1 m
                       |    |//\       |               |
            Symetry    |    |///|      |    Symetry    |
              plane    |    |///|      |    plane      |
                       |^^^^|///|      |               |
                       | V1 |///|^^^^^^|               |
                       |    |///|  V2  |               |

                        air         air
                      T1=600K     T2=300K
                      V1=2m/s     V2=0.5m/s

  ENDDIS
 ************************************************************
  Group 1. Run Title and Number
 ************************************************************
 ************************************************************
 
 TEXT(NON-ISOTHERMAL 2D LAMINAR MIXING LAYER  )
 
 ************************************************************
 ************************************************************
 
 IRUNN = 1 ;LIBREF = 0
 ************************************************************
  Group 2. Time dependence
 STEADY = T
 ************************************************************
  Group 3. X-Direction Grid Spacing
 CARTES = T
 NX = 55
 XULAST =8.0E-03
 ************************************************************
  Group 4. Y-Direction Grid Spacing
 NY = 75
 YVLAST =0.2
 ************************************************************
  Group 5. Z-Direction Grid Spacing
 PARAB = F
 NZ = 1
 ZWLAST =1.0E-03
 ************************************************************
  Group 6. Body-Fitted Coordinates
 BFC = T ;NONORT = F
 NCRT = -1
 RSTGEO = F ;SAVGEO = F
 UUP = F ;VUP = F ;WUP = F
 NGEOM =CHAM
 NAMXYZ =CHAM
 ANGMIN =20.
 DOMAIN(   1,  56,  46,  76,   1,   1)
    * Set fixed sub-domain
 FIXDOM(   1,   0,   0,   0,   0,   0,   0)
 FIXDOM(   2,   0,   0,   0,   0,   0,   0)
 FIXDOM(   3,   0,   0,   0,   0,   0,   0)
 FIXDOM(   4,   0,   0,   0,   0,   0,   0)
 FIXDOM(   5,   0,   0,   0,   0,   0,   0)
 FIXDOM(   6,   0,   0,   0,   0,   0,   0)
 FIXDOM(   7,   0,   0,   0,   0,   0,   0)
 FIXDOM(   8,   0,   0,   0,   0,   0,   0)
 FIXDOM(   9,   0,   0,   0,   0,   0,   0)
 FIXDOM(  10,   0,   0,   0,   0,   0,   0)
 LIJ = F ;LJK = T ;LIK = F
 IMON = 28 ;JMON = 61 ;KMON = 1
 CCM = T
 ************************************************************
  Group 7. Variables: STOREd,SOLVEd,NAMEd
 ONEPHS = T
 NAME(1)=P1 ;NAME(3)=U1
 NAME(5)=V1 ;NAME(16)=UC1
 NAME(17)=VC1 ;NAME(42)=ENUL
 NAME(43)=KOND ;NAME(44)=BLOK
 NAME(45)=TEM1 ;NAME(46)=WCRT
 NAME(47)=VCRT ;NAME(48)=UCRT
 NAME(49)=DEN1 ;NAME(50)=PRPS
    * Y in SOLUTN argument list denotes:
    * 1-stored 2-solved 3-whole-field
    * 4-point-by-point 5-explicit 6-harmonic averaging 
 SOLUTN(P1,Y,Y,Y,N,N,Y)
 SOLUTN(U1,Y,Y,N,N,N,Y)
 SOLUTN(V1,Y,Y,N,N,N,Y)
 SOLUTN(UC1,Y,Y,N,N,N,Y)
 SOLUTN(VC1,Y,Y,N,N,N,Y)
 SOLUTN(ENUL,Y,N,N,N,N,Y)
 SOLUTN(KOND,Y,N,N,N,N,Y)
 SOLUTN(BLOK,Y,N,N,N,N,Y)
 SOLUTN(TEM1,Y,Y,Y,N,N,Y)
 SOLUTN(WCRT,Y,N,N,N,N,Y)
 SOLUTN(VCRT,Y,N,N,N,N,Y)
 SOLUTN(UCRT,Y,N,N,N,N,Y)
 SOLUTN(DEN1,Y,N,N,N,N,Y)
 SOLUTN(PRPS,Y,N,N,N,N,Y)
 DEN1 = 49
 VISL = 42
 IVARBK = -1 ;ISOLBK = 1
 PRNITS= F ;OPTRLX= F ;NOSIP= F ;ALLVBC= F
 DBSOLV= F ;IMPINI= F ;EARL1D= F
 PRPS = 50
 ************************************************************
  Group 8. Terms & Devices
    * Y in TERMS argument list denotes:
    * 1-built-in source 2-convection 3-diffusion 4-transient
    * 5-first phase variable 6-interphase transport         
 TERMS(P1,Y,Y,Y,N,Y,Y)
 TERMS(U1,Y,Y,Y,Y,Y,Y)
 TERMS(V1,Y,Y,Y,Y,Y,Y)
 TERMS(UC1,N,Y,Y,Y,Y,Y)
 TERMS(VC1,N,Y,Y,Y,Y,Y)
 TERMS(TEM1,N,Y,Y,Y,N,Y)
 DIFCUT =0.5 ;ZDIFAC =1.
 GALA = F ;ADDDIF = F
 UCONV = T
 UDIFF = T
 USOLVE = T
 ISOLX = 0 ;ISOLY = 0 ;ISOLZ = 0
 ************************************************************
  Group 9. Properties used if PRPS is not
  stored, and where PRPS = -1.0 if it is!
 RHO1 =1. ;TMP1 =0.
 EL1 =0.
 TSURR =0. ;TEMP0 =0.
 PRESS0 =1.013E+05
 DVO1DT =0. ;DRH1DP =0.
 EMISS =0. ;SCATT =0.
 RADIA =0. ;RADIB =0.
 ENUL =1.0E-05 ;ENUT =0.
 PRNDTL(U1)=1. ;PRNDTL(V1)=1.
 PRNDTL(UC1)=1. ;PRNDTL(VC1)=1.
 PRNDTL(TEM1)=1.
 PRT(U1)=1. ;PRT(V1)=1.
 PRT(UC1)=1. ;PRT(VC1)=1.
 PRT(TEM1)=1.
 CP1 =1. ;CP2 =1.
   *  List of user-defined materials to be read by EARTH
    MATFLG=T;IMAT=2   
   *  Name
   *Ind. Dens.  Viscos.  Spec.heat  Conduct.  Expans.  Compr.
   *  
    152 8000 0 500 GRND4 0 0
   *       constants for GRND option no 1
    1.4170E+01 6.2500E-03
   *  
    31 GRND5 GRND6 1004.0 0.0263 3.33E-3 GRND5
   *       constants for GRND option no 1
    0 3.4843E-03
   *       constants for GRND option no 2
    1.4600E-06 110
   *       constants for GRND option no 3
    0 0 7.1429E-01
 ************************************************************
  Group 10.Inter-Phase Transfer Processes
 ************************************************************
  Group 11.Initial field variables (PHIs)
 FIINIT(P1)=1.0E-10 ;FIINIT(U1)=1.0E-10
 FIINIT(V1)=1.0E-10 ;FIINIT(UC1)=1.0E-10
 FIINIT(VC1)=1.0E-10 ;FIINIT(ENUL)=1.0E-10
 FIINIT(KOND)=1.0E-10 ;FIINIT(BLOK)=1.
 FIINIT(TEM1)=450. ;FIINIT(WCRT)=1.0E-10
 FIINIT(VCRT)=1.0E-10 ;FIINIT(UCRT)=1.0E-10
 FIINIT(DEN1)=1.0E-10 ;FIINIT(PRPS)=31.
 
 PATCH(STEEL ,INIVAL, 21, 30, 1, 45, 1, 1, 1, 1)
 INIT(STEEL ,BLOK,0. ,2. )
 INIT(STEEL ,PRPS,0. ,152. )
 INIADD = F
 FSWEEP = 1
 NAMFI =CHAM
 ************************************************************
  Group 12. Patchwise adjustment of terms
  Patches for this group are printed with those
  for Group 13.
  Their names begin either with GP12 or &
 ************************************************************
  Group 13. Boundary & Special Sources
 
 PATCH(BFCIN1 ,SOUTH , 1, 20, 1, 1, 1, 1, 1, 1)
 COVAL(BFCIN1 ,P1 , FIXFLU , GRND1 )
 COVAL(BFCIN1 ,U1 ,0. , GRND1 )
 COVAL(BFCIN1 ,V1 ,0. , GRND1 )
 COVAL(BFCIN1 ,UC1 ,0. , GRND2 )
 COVAL(BFCIN1 ,VC1 ,0. , GRND2 )
 COVAL(BFCIN1 ,TEM1,0. ,600. )
 COVAL(BFCIN1 ,VCRT,0. ,2. )
 COVAL(BFCIN1 ,DEN1,0. ,0.5883 )
 
 PATCH(BFCIN2 ,SOUTH , 31, 55, 1, 1, 1, 1, 1, 1)
 COVAL(BFCIN2 ,P1 , FIXFLU , GRND1 )
 COVAL(BFCIN2 ,U1 ,0. , GRND1 )
 COVAL(BFCIN2 ,V1 ,0. , GRND1 )
 COVAL(BFCIN2 ,UC1 ,0. , GRND2 )
 COVAL(BFCIN2 ,VC1 ,0. , GRND2 )
 COVAL(BFCIN2 ,TEM1,0. ,300. )
 COVAL(BFCIN2 ,VCRT,0. ,0.5 )
 COVAL(BFCIN2 ,DEN1,0. ,1.176 )
 
 PATCH(OUT ,NORTH , 1, 55, 75, 75, 1, 1, 1, 1)
 COVAL(OUT ,P1 ,1000. ,0. )
 COVAL(OUT ,U1 ,0. ,0. )
 COVAL(OUT ,V1 ,0. ,0. )
 COVAL(OUT ,UC1 ,0. ,0. )
 COVAL(OUT ,VC1 ,0. ,0. )
 COVAL(OUT ,TEM1,0. , SAME )
 XCYCLE = F
 EGWF = T
 WALLCO = GRND2
 BFCA =1.189
 ************************************************************
  Group 14. Downstream Pressure For PARAB
 ************************************************************
  Group 15. Terminate Sweeps
 LSWEEP = 600 ;ISWC1 = 1
 LITHYD = 1 ;LITFLX = 1 ;LITC = 1 ;ITHC1 = 1
 SELREF = T
 RESFAC =1.0E-02
 ************************************************************
  Group 16. Terminate Iterations
 LITER(P1)=20 ;LITER(U1)=2
 LITER(V1)=2 ;LITER(UC1)=2
 LITER(VC1)=2 ;LITER(TEM1)=20
 ENDIT(P1)=1.0E-03 ;ENDIT(U1)=1.0E-03
 ENDIT(V1)=1.0E-03 ;ENDIT(UC1)=1.0E-03
 ENDIT(VC1)=1.0E-03 ;ENDIT(TEM1)=1.0E-03
 ************************************************************
  Group 17. Relaxation
 RELAX(P1,LINRLX,0.9)
 RELAX(U1,FALSDT,0.05062)
 RELAX(V1,FALSDT,0.05062)
 RELAX(UC1,FALSDT,0.05062)
 RELAX(VC1,FALSDT,0.05062)
 RELAX(ENUL,LINRLX,1.)
 RELAX(KOND,LINRLX,1.)
 RELAX(BLOK,LINRLX,1.)
 RELAX(TEM1,FALSDT,1062.)
 RELAX(WCRT,LINRLX,1.)
 RELAX(VCRT,LINRLX,1.)
 RELAX(UCRT,LINRLX,1.)
 RELAX(DEN1,LINRLX,1.)
 RELAX(PRPS,LINRLX,1.)
 OVRRLX =0.
 EXPERT = F ;NNORSL = F
 ************************************************************
  Group 18. Limits
 VARMAX(P1)=1.0E+10 ;VARMIN(P1)=-1.0E+10
 VARMAX(U1)=1.0E+06 ;VARMIN(U1)=-1.0E+06
 VARMAX(V1)=1.0E+06 ;VARMIN(V1)=-1.0E+06
 VARMAX(UC1)=1.0E+06 ;VARMIN(UC1)=-1.0E+06
 VARMAX(VC1)=1.0E+06 ;VARMIN(VC1)=-1.0E+06
 VARMAX(ENUL)=1.0E+10 ;VARMIN(ENUL)=-1.0E+10
 VARMAX(KOND)=1.0E+10 ;VARMIN(KOND)=-1.0E+10
 VARMAX(BLOK)=1.0E+10 ;VARMIN(BLOK)=-1.0E+10
 VARMAX(TEM1)=1.0E+10 ;VARMIN(TEM1)=-1.0E+10
 VARMAX(WCRT)=1.0E+10 ;VARMIN(WCRT)=-1.0E+10
 VARMAX(VCRT)=1.0E+10 ;VARMIN(VCRT)=-1.0E+10
 VARMAX(UCRT)=1.0E+10 ;VARMIN(UCRT)=-1.0E+10
 VARMAX(DEN1)=1.0E+10 ;VARMIN(DEN1)=-1.0E+10
 VARMAX(PRPS)=1.0E+10 ;VARMIN(PRPS)=-1.0E+10
 ************************************************************
  Group 19. Data transmitted to GROUND
 PARSOL = F
 LSG4 = T
 ISG62 = 1
 CSG10   ='Q1'
 SPEDAT(SET,MATERIAL,31,L,T)
 SPEDAT(SET,MATERIAL,152,L,T)
 ************************************************************
  Group 20. Preliminary Printout
 ************************************************************
  Group 21. Print-out of Variables
 INIFLD = F ;SUBWGR = F
    * Y in OUTPUT argument list denotes:
    * 1-field 2-correction-eq. monitor 3-selective dumping      
    * 4-whole-field residual 5-spot-value table 6-residual table
 OUTPUT(P1,Y,N,Y,Y,Y,Y)
 OUTPUT(U1,Y,N,N,N,N,N)
 OUTPUT(V1,Y,N,N,N,N,N)
 OUTPUT(UC1,Y,N,Y,Y,Y,Y)
 OUTPUT(VC1,Y,N,Y,Y,Y,Y)
 OUTPUT(ENUL,Y,N,Y,N,N,N)
 OUTPUT(KOND,Y,N,Y,N,N,N)
 OUTPUT(BLOK,Y,N,Y,N,N,N)
 OUTPUT(TEM1,Y,N,Y,Y,Y,Y)
 OUTPUT(WCRT,Y,N,Y,N,N,N)
 OUTPUT(VCRT,Y,N,Y,N,N,N)
 OUTPUT(UCRT,Y,N,Y,N,N,N)
 OUTPUT(DEN1,Y,N,Y,N,N,N)
 OUTPUT(PRPS,Y,N,Y,N,N,N)
 ************************************************************
  Group 22. Monitor Print-Out
 IXMON = 29 ;IYMON = 47 ;IZMON = 1
 NPRMON = 100000 ;NPRMNT = 1 ;TSTSWP = -1
 UWATCH = T ;USTEER = T
 HIGHLO = F
 ************************************************************
  Group 23.Field Print-Out & Plot Control
 NPRINT = 100000 ;NUMCLS = 5
 NXPRIN = 1 ;IXPRF = 1 ;IXPRL = 10000
 NYPRIN = 1 ;IYPRF = 1 ;IYPRL = 10000
 IPLTF = 1 ;IPLTL = -1 ;NPLT = -1
 ISWPRF = 1 ;ISWPRL = 100000
 ITABL = 3 ;IPROF = 3
 ABSIZ =0.5 ;ORSIZ =0.4
 NTZPRF = 1 ;NCOLPF = 50
 ICHR = 2 ;NCOLCO = 45 ;NROWCO = 20
   No PATCHes yet used for this Group
 ************************************************************
  Group 24. Dumps For Restarts
 SAVE = T ;NOWIPE = F
 NSAVE =CHAM
STOP