TALK=T;RUN(1,1)
  DISPLAY
  ----------------------------------------------------------
  The case  concerns unsteady  3D laminar flow generated  by
  rotating disk. Reynolds number is set by REYNU  at the top
  of Q1.

  The main purpose of the case is to demonstrate the way  to
  set problem using  sliding LINK option  of MBFGE. User  is
  advised to pay attention on the use of the following  PIL-
  commands:
    READCO(MBGR+Y)
    MPATCH(1,MBS1.2,NORTH,...); MPATCH(2,MBS2.1,SOUTH,...)

  NOTE!, that the stacking along Y-axis, achieved by the use
  +Y in READCO, provides for XCYCLE=T treatment.
  ----------------------------------------------------------
  ENDDIS
  PHOTON USE
   p ; ; ; ; ;

   use patgeo
   pause
   cl
   vi z
   vec k 20 sh
   pause
   cl
   vi x
   set vec com - vc1 wc1
   vec i 1 sh
  ENDUSE
 ************************************************************
  Group 1. Run Title and Number
 ************************************************************
 ************************************************************
 
 TEXT(MBFGE: Flow around rotating disk (Re=1).)
 
 ************************************************************
 ************************************************************
 
 IRUNN = 1 ;LIBREF = 150
 ************************************************************
  Group 2. Time dependence
 STEADY = F
    * Set overall time and no. of steps
 TFIRST =0. ;TLAST =10.
 FSTEP = 1 ;LSTEP = 10
 TFRAC(1)=0.1 ;TFRAC(2)=0.2
 TFRAC(3)=0.3 ;TFRAC(4)=0.4
 TFRAC(5)=0.5 ;TFRAC(6)=0.6
 TFRAC(7)=0.7 ;TFRAC(8)=0.8
 TFRAC(9)=0.9 ;TFRAC(10)=1.
 ************************************************************
  Group 3. X-Direction Grid Spacing
 CARTES = T
 NX = 4
 XULAST =0.1
 ************************************************************
  Group 4. Y-Direction Grid Spacing
 NY = 22
 YVLAST =0.5
 ************************************************************
  Group 5. Z-Direction Grid Spacing
 PARAB = F
 NZ = 36
 ZWLAST =0.5
 ************************************************************
  Group 6. Body-Fitted Coordinates
 BFC = T ;NONORT = F
 NUMBLK = 2
 NCRT = -1
 RSTGEO = F ;SAVGEO = F
 UUP = F ;VUP = F ;WUP = F
 NGEOM =CHAM
 NAMXYZ =CHAM
 ANGMIN =20.
 DOMAIN(   1,   5,   1,  23,   1,  37)
    * Set fixed sub-domain
 FIXDOM(   1,   0,   0,   0,   0,   0,   0)
 FIXDOM(   2,   0,   0,   0,   0,   0,   0)
 FIXDOM(   3,   0,   0,   0,   0,   0,   0)
 FIXDOM(   4,   0,   0,   0,   0,   0,   0)
 FIXDOM(   5,   0,   0,   0,   0,   0,   0)
 FIXDOM(   6,   0,   0,   0,   0,   0,   0)
 FIXDOM(   7,   0,   0,   0,   0,   0,   0)
 FIXDOM(   8,   0,   0,   0,   0,   0,   0)
 FIXDOM(   9,   0,   0,   0,   0,   0,   0)
 FIXDOM(  10,   0,   0,   0,   0,   0,   0)
 LIJ = F ;LJK = T ;LIK = F
    * X-cyclic boundaries switched
 XCYIZ( 1, T ) ; XCYIZ( 2, T ) ; XCYIZ( 3, T )
 XCYIZ( 4, T ) ; XCYIZ( 5, T ) ; XCYIZ( 6, T )
 XCYIZ( 7, T ) ; XCYIZ( 8, T ) ; XCYIZ( 9, T )
 XCYIZ( 10, T ) ; XCYIZ( 11, T ) ; XCYIZ( 12, T )
 XCYIZ( 13, T ) ; XCYIZ( 14, T ) ; XCYIZ( 15, T )
 XCYIZ( 16, T ) ; XCYIZ( 17, T ) ; XCYIZ( 18, T )
 XCYIZ( 19, T ) ; XCYIZ( 20, T ) ; XCYIZ( 21, T )
 XCYIZ( 22, T ) ; XCYIZ( 23, T ) ; XCYIZ( 24, T )
 XCYIZ( 25, T ) ; XCYIZ( 26, T ) ; XCYIZ( 27, T )
 XCYIZ( 28, T ) ; XCYIZ( 29, T ) ; XCYIZ( 30, T )
 XCYIZ( 31, T ) ; XCYIZ( 32, T ) ; XCYIZ( 33, T )
 XCYIZ( 34, T ) ; XCYIZ( 35, T ) ; XCYIZ( 36, T )
 CCM = T
 ************************************************************
  Group 7. Variables: STOREd,SOLVEd,NAMEd
 ONEPHS = T
 NAME(1)=P1 ;NAME(3)=U1
 NAME(5)=V1 ;NAME(7)=W1
 NAME(142)=PRPS ;NAME(143)=WC1
 NAME(144)=VC1 ;NAME(145)=UC1
 NAME(146)=WCRT ;NAME(147)=VCRT
 NAME(148)=UCRT ;NAME(149)=HPOR
    * Y in SOLUTN argument list denotes:
    * 1-stored 2-solved 3-whole-field
    * 4-point-by-point 5-explicit 6-harmonic averaging 
 SOLUTN(P1,Y,Y,Y,N,N,Y)
 SOLUTN(U1,Y,Y,N,N,N,Y)
 SOLUTN(V1,Y,Y,N,N,N,Y)
 SOLUTN(W1,Y,Y,N,N,N,Y)
 SOLUTN(PRPS,Y,N,N,N,N,N)
 SOLUTN(WC1,Y,Y,Y,N,N,Y)
 SOLUTN(VC1,Y,Y,Y,N,N,Y)
 SOLUTN(UC1,Y,Y,Y,N,N,Y)
 SOLUTN(WCRT,Y,N,N,N,N,N)
 SOLUTN(VCRT,Y,N,N,N,N,N)
 SOLUTN(UCRT,Y,N,N,N,N,N)
 SOLUTN(HPOR,Y,N,N,N,N,Y)
 EPOR = 0 ;HPOR = 149 ;NPOR = 0 ;VPOR = 0
 PRPS = 142
 ************************************************************
  Group 8. Terms & Devices
    * Y in TERMS argument list denotes:
    * 1-built-in source 2-convection 3-diffusion 4-transient
    * 5-first phase variable 6-interphase transport         
 TERMS(P1,Y,Y,Y,N,Y,Y)
 TERMS(U1,N,N,N,N,N,N)
 TERMS(V1,N,N,N,N,N,N)
 TERMS(W1,N,N,N,N,N,N)
 TERMS(WC1,N,Y,Y,Y,N,Y)
 TERMS(VC1,N,Y,Y,Y,Y,Y)
 TERMS(UC1,N,Y,Y,Y,N,Y)
 DIFCUT =0. ;ZDIFAC =1.
 GALA = F ;ADDDIF = F
 ISOLX = -1 ;ISOLY = -1 ;ISOLZ = -1
 ************************************************************
  Group 9. Properties used if PRPS is not
  stored, and where PRPS = -1.0 if it is!
 RHO1 =1.189 ;TMP1 =0.
 EL1 =0.
 TSURR =0. ;TEMP0 =0.
 PRESS0 =0.
 DVO1DT =0. ;DRH1DP =0.
 EMISS =0. ;SCATT =0.
 RADIA =0. ;RADIB =0.
 ENUL =0.2 ;ENUT =0.
 PRNDTL(WC1)=1. ;PRNDTL(VC1)=1.
 PRNDTL(UC1)=1.
 PRT(WC1)=1. ;PRT(VC1)=1.
 PRT(UC1)=1.
 CP1 =1. ;CP2 =1.
 ************************************************************
  Group 10.Inter-Phase Transfer Processes
 ************************************************************
  Group 11.Initial field variables (PHIs)
 FIINIT(P1)=1.0E-10 ;FIINIT(U1)=1.0E-10
 FIINIT(V1)=1.0E-10 ;FIINIT(W1)=1.0E-10
 FIINIT(PRPS)=-1. ;FIINIT(WC1)=1.0E-05
 FIINIT(VC1)=1.0E-05 ;FIINIT(UC1)=1.0E-05
 FIINIT(WCRT)=1.0E-10 ;FIINIT(VCRT)=1.0E-10
 FIINIT(UCRT)=1.0E-10 ;FIINIT(HPOR)=1.
 
 PATCH(DISK ,INIVAL, 1, 4, 1, 8, 18, 18, 1, 1)
 INIT(DISK ,HPOR,0. ,0. )
 INIADD = F
 FSWEEP = 1
 NAMFI =CHAM
 ************************************************************
  Group 12. Patchwise adjustment of terms
  Patches for this group are printed with those
  for Group 13.
  Their names begin either with GP12 or &
 ************************************************************
  Group 13. Boundary & Special Sources
 
 PATCH(MBD1 ,CELL , 1, 4, 1, 11, 1, 36, 1, 10)
 
 PATCH(MBD2 ,CELL , 1, 4, 13, 22, 1, 36, 1, 10)
 
 PATCH(MBS1.2 ,NORTH , 1, 4, 11, 11, 1, 36, 1, 10)
 
 PATCH(MBS2.1 ,SOUTH , 1, 4, 13, 13, 1, 36, 1, 10)
 
 PATCH(SLIDRT1 ,CELL , 1, 4, 1, 11, 1, 36, 1, 10)
 
 PATCH(WH1 ,HWALL , 1, 4, 1, 8, 18, 18, 1, 10)
 COVAL(WH1 ,WC1 ,1. ,0. )
 COVAL(WH1 ,VC1 ,1. ,0. )
 COVAL(WH1 ,UC1 ,1. ,0. )
 
 PATCH(WL1 ,LWALL , 1, 4, 1, 8, 19, 19, 1, 10)
 COVAL(WL1 ,WC1 ,1. ,0. )
 COVAL(WL1 ,VC1 ,1. ,0. )
 COVAL(WL1 ,UC1 ,1. ,0. )
 
 PATCH(POL1 ,LOW , 1, 4, 1, 11, 1, 1, 1, 10)
 COVAL(POL1 ,P1 ,1.0E-02 ,0. )
 COVAL(POL1 ,WC1 ,0. , SAME )
 COVAL(POL1 ,VC1 ,0. , SAME )
 COVAL(POL1 ,UC1 ,0. , SAME )
 
 PATCH(POH1 ,HIGH , 1, 4, 1, 11, 36, 36, 1, 10)
 COVAL(POH1 ,P1 ,1.0E-02 ,0. )
 COVAL(POH1 ,WC1 ,0. , SAME )
 COVAL(POH1 ,VC1 ,0. , SAME )
 COVAL(POH1 ,UC1 ,0. , SAME )
 
 PATCH(POL2 ,LOW , 1, 4, 13, 22, 1, 1, 1, 10)
 COVAL(POL2 ,P1 ,1.0E-02 ,0. )
 COVAL(POL2 ,WC1 ,0. , SAME )
 COVAL(POL2 ,VC1 ,0. , SAME )
 COVAL(POL2 ,UC1 ,0. , SAME )
 
 PATCH(POH2 ,HIGH , 1, 4, 13, 22, 36, 36, 1, 10)
 COVAL(POH2 ,P1 ,1.0E-02 ,0. )
 COVAL(POH2 ,WC1 ,0. , SAME )
 COVAL(POH2 ,VC1 ,0. , SAME )
 COVAL(POH2 ,UC1 ,0. , SAME )
 
 PATCH(PON2 ,NORTH , 1, 4, 22, 22, 1, 36, 1, 10)
 COVAL(PON2 ,P1 ,1. ,0. )
 COVAL(PON2 ,WC1 ,0. , SAME )
 COVAL(PON2 ,VC1 ,0. , SAME )
 COVAL(PON2 ,UC1 ,0. , SAME )
 XCYCLE = T
 EGWF = T
 WALLCO = GRND2
 ************************************************************
  Group 14. Downstream Pressure For PARAB
 ************************************************************
  Group 15. Terminate Sweeps
 LSWEEP = 30 ;ISWC1 = 1
 LITHYD = 1 ;LITFLX = 1 ;LITC = 1 ;ITHC1 = 1
 SELREF = T
 RESFAC =1.0E-03
 ************************************************************
  Group 16. Terminate Iterations
 LITER(P1)=20 ;LITER(U1)=10
 LITER(V1)=10 ;LITER(W1)=10
 LITER(WC1)=20 ;LITER(VC1)=20
 LITER(UC1)=20
 ENDIT(P1)=1.0E-03 ;ENDIT(U1)=1.0E-03
 ENDIT(V1)=1.0E-03 ;ENDIT(W1)=1.0E-03
 ENDIT(WC1)=1.0E-03 ;ENDIT(VC1)=1.0E-03
 ENDIT(UC1)=1.0E-03
 ************************************************************
  Group 17. Relaxation
 RELAX(P1,LINRLX,0.5)
 RELAX(U1,FALSDT,1.)
 RELAX(V1,FALSDT,1.)
 RELAX(W1,FALSDT,1.)
 RELAX(PRPS,LINRLX,1.)
 RELAX(WC1,FALSDT,1.0E+09)
 RELAX(VC1,FALSDT,1.0E+09)
 RELAX(UC1,FALSDT,1.0E+09)
 RELAX(WCRT,LINRLX,1.)
 RELAX(VCRT,LINRLX,1.)
 RELAX(UCRT,LINRLX,1.)
 OVRRLX =0.
 EXPERT = F ;NNORSL = F
 ************************************************************
  Group 18. Limits
 VARMAX(P1)=1.0E+10 ;VARMIN(P1)=-1.0E+10
 VARMAX(U1)=1.0E+06 ;VARMIN(U1)=-1.0E+06
 VARMAX(V1)=1.0E+06 ;VARMIN(V1)=-1.0E+06
 VARMAX(W1)=1.0E+06 ;VARMIN(W1)=-1.0E+06
 VARMAX(PRPS)=1.0E+10 ;VARMIN(PRPS)=-1.0E+10
 VARMAX(WC1)=1.0E+10 ;VARMIN(WC1)=-1.0E+10
 VARMAX(VC1)=1.0E+10 ;VARMIN(VC1)=0.
 VARMAX(UC1)=1.0E+10 ;VARMIN(UC1)=-1.0E+10
 VARMAX(WCRT)=1.0E+10 ;VARMIN(WCRT)=-1.0E+10
 VARMAX(VCRT)=1.0E+10 ;VARMIN(VCRT)=-1.0E+10
 VARMAX(UCRT)=1.0E+10 ;VARMIN(UCRT)=-1.0E+10
 VARMAX(HPOR)=1.0E+10 ;VARMIN(HPOR)=-1.0E+10
 ************************************************************
  Group 19. Data transmitted to GROUND
 PARSOL = F
 CONWIZ = T
 LSG3 = T
 ISG62 = 1
 ANGVEL =5.
 ROTAZB =1.
 CSG3    ='LCRU'
 SPEDAT(SET,GXMONI,TRANSIENT,L,F)
 ************************************************************
  Group 20. Preliminary Printout
 ************************************************************
  Group 21. Print-out of Variables
 INIFLD = F ;SUBWGR = F
    * Y in OUTPUT argument list denotes:
    * 1-field 2-correction-eq. monitor 3-selective dumping      
    * 4-whole-field residual 5-spot-value table 6-residual table
 OUTPUT(P1,Y,N,Y,Y,Y,Y)
 OUTPUT(U1,Y,N,Y,Y,Y,Y)
 OUTPUT(V1,Y,N,Y,Y,Y,Y)
 OUTPUT(W1,Y,N,Y,Y,Y,Y)
 OUTPUT(PRPS,Y,N,Y,N,N,N)
 OUTPUT(WC1,Y,N,Y,Y,Y,Y)
 OUTPUT(VC1,Y,N,Y,Y,Y,Y)
 OUTPUT(UC1,Y,N,Y,Y,Y,Y)
 OUTPUT(WCRT,Y,N,Y,N,N,N)
 OUTPUT(VCRT,Y,N,Y,N,N,N)
 OUTPUT(UCRT,Y,N,Y,N,N,N)
 OUTPUT(HPOR,Y,N,Y,N,N,N)
 ************************************************************
  Group 22. Monitor Print-Out
 IXMON = 3 ;IYMON = 6 ;IZMON = 19
 NPRMON = 100000 ;NPRMNT = 1 ;TSTSWP = -1
 UWATCH = T ;USTEER = T
 HIGHLO = F
 ************************************************************
  Group 23.Field Print-Out & Plot Control
 NPRINT = 100000 ;NUMCLS = 5
 NTPRIN = 100000 ;ISTPRF = 1 ;ISTPRL = 100000
 NXPRIN = -1 ;IXPRF = 1 ;IXPRL = 10000
 NYPRIN = -1 ;IYPRF = 1 ;IYPRL = 10000
 NZPRIN = -1 ;IZPRF = 1 ;IZPRL = 10000
 XZPR = F ;YZPR = F
 IPLTF = 1 ;IPLTL = -1 ;NPLT = -1
 ISWPRF = 1 ;ISWPRL = 100000
 ITABL = 3 ;IPROF = 1
 ABSIZ =0.5 ;ORSIZ =0.4
 NTZPRF = 1 ;NCOLPF = 50
 ICHR = 2 ;NCOLCO = 45 ;NROWCO = 20
   No PATCHes yet used for this Group
 ************************************************************
  Group 24. Dumps For Restarts
 SAVE = T ;NOWIPE = F
 NSAVE =CHAM
STOP