```
TALK=T;RUN(1,1)
************************************************************
Group 1. Run Title and Number
************************************************************
************************************************************

TEXT(3D solution of f309 (Tem1)              )

************************************************************
************************************************************

IRUNN = 1 ;LIBREF = 0
************************************************************
Group 2. Time dependence
************************************************************
Group 3. X-Direction Grid Spacing
CARTES = T
NX = 8
XULAST =8.
XFRAC(1)=0.125 ;XFRAC(2)=0.25
XFRAC(3)=0.375 ;XFRAC(4)=0.5
XFRAC(5)=0.625 ;XFRAC(6)=0.75
XFRAC(7)=0.875 ;XFRAC(8)=1.
************************************************************
Group 4. Y-Direction Grid Spacing
NY = 6
YVLAST =6.
YFRAC(1)=0.166667 ;YFRAC(2)=0.333333
YFRAC(3)=0.5 ;YFRAC(4)=0.666667
YFRAC(5)=0.833333 ;YFRAC(6)=1.
************************************************************
Group 5. Z-Direction Grid Spacing
PARAB = F
NZ = 6
ZWLAST =6.
ZFRAC(1)=0.166667 ;ZFRAC(2)=0.333333
ZFRAC(3)=0.5 ;ZFRAC(4)=0.666667
ZFRAC(5)=0.833333 ;ZFRAC(6)=1.
************************************************************
Group 6. Body-Fitted Coordinates
************************************************************
Group 7. Variables: STOREd,SOLVEd,NAMEd
ONEPHS = T
NAME(149)=TEM1 ;NAME(150)=PRPS
* Y in SOLUTN argument list denotes:
* 1-stored 2-solved 3-whole-field
* 4-point-by-point 5-explicit 6-harmonic averaging
SOLUTN(TEM1,Y,Y,Y,N,N,Y)
SOLUTN(PRPS,Y,N,N,N,N,Y)
PRPS = 150
************************************************************
Group 8. Terms & Devices
* Y in TERMS argument list denotes:
* 1-built-in source 2-convection 3-diffusion 4-transient
* 5-first phase variable 6-interphase transport
TERMS(TEM1,N,Y,Y,Y,N,Y)
DIFCUT =0.5 ;ZDIFAC =1.
GALA = F ;ADDDIF = F
ISOLX = -1 ;ISOLY = -1 ;ISOLZ = -1
************************************************************
Group 9. Properties used if PRPS is not
stored, and where PRPS = -1.0 if it is!
RHO1 =1. ;TMP1 =0.
EL1 =0.
TSURR =0. ;TEMP0 =0.
PRESS0 =1.0E+05
DVO1DT =0. ;DRH1DP =0.
EMISS =0. ;SCATT =0.
ENUL =0.015 ;ENUT =0.
PRNDTL(TEM1)=1.
PRT(TEM1)=1.
CP1 =1. ;CP2 =1.
************************************************************
Group 10.Inter-Phase Transfer Processes
************************************************************
Group 11.Initial field variables (PHIs)
FIINIT(TEM1)=1000. ;FIINIT(PRPS)=-1.
No PATCHes yet used for this Group
FSWEEP = 1
NAMFI =CHAM
************************************************************
Group 12. Patchwise adjustment of terms
Patches for this group are printed with those
for Group 13.
Their names begin either with GP12 or &
************************************************************
Group 13. Boundary & Special Sources

PATCH(^OB1 ,CELL , 1, 0, 0, 0, 0, 0, 1, 1)

PATCH(^OB2 ,CELL , 2, 0, 0, 0, 0, 0, 1, 1)
XCYCLE = F
EGWF = T
WALLCO = GRND2
************************************************************
Group 14. Downstream Pressure For PARAB
************************************************************
Group 15. Terminate Sweeps
LSWEEP = 1 ;ISWC1 = 1
LITHYD = 1 ;LITFLX = 1 ;LITC = 1 ;ITHC1 = 1
SELREF = T
RESFAC =1.0E-03
************************************************************
Group 16. Terminate Iterations
LITER(TEM1)=1
ENDIT(TEM1)=1.0E-03
************************************************************
Group 17. Relaxation
RELAX(TEM1,LINRLX,1.)
RELAX(PRPS,LINRLX,1.)
OVRRLX =0.
EXPERT = F ;NNORSL = F
************************************************************
Group 18. Limits
VARMAX(TEM1)=1.0E+10 ;VARMIN(TEM1)=-1.0E+10
VARMAX(PRPS)=1.0E+10 ;VARMIN(PRPS)=-1.0E+10
************************************************************
Group 19. Data transmitted to GROUND
ISG62 = 0
SPEDAT(SET,FGMB_ITR,TEM1,I,10000)
SPEDAT(SET,OBJNAM,^OB1,C,B5)
SPEDAT(SET,OBJTYP,^OB1,C,FINE_GRID_VOL)
SPEDAT(SET,^OB1,FINEX,I,3)
SPEDAT(SET,^OB1,FINEY,I,3)
SPEDAT(SET,^OB1,FINEZ,I,3)
SPEDAT(SET,OBJNAM,^OB2,C,B6)
SPEDAT(SET,OBJTYP,^OB2,C,FINE_GRID_VOL)
SPEDAT(SET,^OB2,FINEX,I,3)
SPEDAT(SET,^OB2,FINEY,I,3)
SPEDAT(SET,^OB2,FINEZ,I,3)
SPEDAT(SET,OBJNAM,^OB3,C,B3)
SPEDAT(SET,OBJTYP,^OB3,C,PLATE)
SPEDAT(SET,OBJNAM,^OB4,C,B4)
SPEDAT(SET,OBJTYP,^OB4,C,PLATE)
SPEDAT(SET,OBJNAM,^OB5,C,B7)
SPEDAT(SET,OBJTYP,^OB5,C,PLATE)
SPEDAT(SET,OBJNAM,^OB6,C,B8)
SPEDAT(SET,OBJTYP,^OB6,C,PLATE)
SPEDAT(SET,FACETDAT,NUMOBJ,I,6)
************************************************************
Group 20. Preliminary Printout
************************************************************
Group 21. Print-out of Variables
INIFLD = F ;SUBWGR = F
* Y in OUTPUT argument list denotes:
* 1-field 2-correction-eq. monitor 3-selective dumping
* 4-whole-field residual 5-spot-value table 6-residual table
OUTPUT(TEM1,Y,N,Y,Y,Y,Y)
OUTPUT(PRPS,N,N,N,N,N,N)
************************************************************
Group 22. Monitor Print-Out
IXMON = 1 ;IYMON = 3 ;IZMON = 4
NPRMON = 100000 ;NPRMNT = 1 ;TSTSWP = -1
UWATCH = T ;USTEER = T
HIGHLO = F
************************************************************
Group 23.Field Print-Out & Plot Control
NPRINT = 100000 ;NUMCLS = 5
NXPRIN = -1 ;IXPRF = 1 ;IXPRL = 10000
NYPRIN = -1 ;IYPRF = 1 ;IYPRL = 10000
NZPRIN = -1 ;IZPRF = 1 ;IZPRL = 10000
XZPR = T ;YZPR = F
IPLTF = 1 ;IPLTL = -1 ;NPLT = -1
ISWPRF = 1 ;ISWPRL = 100000
ITABL = 3 ;IPROF = 1
ABSIZ =0.5 ;ORSIZ =0.4
NTZPRF = 1 ;NCOLPF = 50
ICHR = 2 ;NCOLCO = 45 ;NROWCO = 20
No PATCHes yet used for this Group
************************************************************
Group 24. Dumps For Restarts
SAVE = T ;NOWIPE = F
NSAVE =CHAM
STOP
```