TALK=T;RUN(1,1)
  DISPLAY
  This case is the same of T103 except that higher-order schemes
  are employed, and the calculation is performed in all six planes
  with the standard k-e model as a consistency test. Experiment
  indicates a reattachment length XR/H=7.2 downstream of the step,
  where H is the step height. The present calculations use the
  linear-upwind scheme (LUS) for the momentum equations, and the
  non-linear flux-limiter OSPRE scheme for KE and EP.

  The HYBRID scheme yields XR/H=5.12, whereas using LUS on the
  momentum equations and the upwind scheme on KE and EP predicts
  X/H=5.85. If LUS is used for momentum and OSPRE for KE and EP,
  then PHOENICS predicts XR/H=6.1. The higher-order schemes need
  700 sweeps for a converged solution, and HYBRID needs 250 sweeps.
  ENDDIS
  PHOTON USE

  p


   0.20443E+04 0.15633E+04 CR
  gr ou y 1;use patgeo
  stream 2d y 1
  -.99 0 10
  stream 2d y 1
  0. .0374 5
  msg Streamlines
  msg Press  to continue
  pause
  cl;use patgeo;vec y 1 sh
  msg Vectors
  msg Press  to continue
  pause
  ENDUSE
  AUTOPLOT USE
   FILE
   PHI 5

   D 1 W1 X 1;PLOT;DIV X .0381 1;SHIFT X -4 1;SCALE
   SCALE X 0 10;LEVEL Y 0
   msg Horizontal W1 velocity distribution along bottom wall
   msg Reattachment point where W1 passes through zero.
   msg Press  to continue
   pause
  ENDUSE
 ************************************************************
  Group 1. Run Title and Number
 ************************************************************
 ************************************************************
 
 TEXT(2DXZ TURBULENT BKWRD FACING STEP: N107  )
 
 ************************************************************
 ************************************************************
 
 IRUNN = 1 ;LIBREF = 14
 ************************************************************
  Group 2. Time dependence
 STEADY = T
 ************************************************************
  Group 3. X-Direction Grid Spacing
 CARTES = T
 NX = 20
 XULAST =0.1143
 XFRAC(1)=0.020568 ;XFRAC(2)=0.050644
 XFRAC(3)=0.085792 ;XFRAC(4)=0.1247
 XFRAC(5)=0.166667 ;XFRAC(6)=0.208634
 XFRAC(7)=0.247542 ;XFRAC(8)=0.282689
 XFRAC(9)=0.312766 ;XFRAC(10)=0.333333
 XFRAC(11)=0.368354 ;XFRAC(12)=0.425753
 XFRAC(13)=0.496372 ;XFRAC(14)=0.577229
 XFRAC(15)=0.666667 ;XFRAC(16)=0.756104
 XFRAC(17)=0.836961 ;XFRAC(18)=0.907581
 XFRAC(19)=0.964979 ;XFRAC(20)=1.
 ************************************************************
  Group 4. Y-Direction Grid Spacing
 NY = 1
 YVLAST =1.
 YFRAC(1)=1.
 ************************************************************
  Group 5. Z-Direction Grid Spacing
 PARAB = F
 NZ = 25
 ZWLAST =0.762
 ZFRAC(1)=0.04 ;ZFRAC(2)=0.08
 ZFRAC(3)=0.12 ;ZFRAC(4)=0.16
 ZFRAC(5)=0.2 ;ZFRAC(6)=0.229645
 ZFRAC(7)=0.263546 ;ZFRAC(8)=0.299264
 ZFRAC(9)=0.336214 ;ZFRAC(10)=0.37411
 ZFRAC(11)=0.412776 ;ZFRAC(12)=0.452095
 ZFRAC(13)=0.491982 ;ZFRAC(14)=0.532371
 ZFRAC(15)=0.573213 ;ZFRAC(16)=0.614466
 ZFRAC(17)=0.656096 ;ZFRAC(18)=0.698075
 ZFRAC(19)=0.740378 ;ZFRAC(20)=0.782985
 ZFRAC(21)=0.825877 ;ZFRAC(22)=0.869038
 ZFRAC(23)=0.912454 ;ZFRAC(24)=0.956112
 ZFRAC(25)=1.
 ************************************************************
  Group 6. Body-Fitted Coordinates
 ************************************************************
  Group 7. Variables: STOREd,SOLVEd,NAMEd
 ONEPHS = T
 NAME(1)=P1 ;NAME(3)=U1
 NAME(7)=W1 ;NAME(12)=KE
 NAME(13)=EP ;NAME(148)=PRPS
 NAME(150)=ENUT
    * Y in SOLUTN argument list denotes:
    * 1-stored 2-solved 3-whole-field
    * 4-point-by-point 5-explicit 6-harmonic averaging 
 SOLUTN(P1,Y,Y,Y,N,N,N)
 SOLUTN(U1,Y,Y,N,N,N,N)
 SOLUTN(W1,Y,Y,N,N,N,N)
 SOLUTN(KE,Y,Y,N,N,N,N)
 SOLUTN(EP,Y,Y,N,N,N,N)
 SOLUTN(PRPS,Y,N,N,N,N,N)
 SOLUTN(ENUT,Y,N,N,N,N,Y)
 VIST = 150
 PRPS = 148
 ************************************************************
  Group 8. Terms & Devices
    * Y in TERMS argument list denotes:
    * 1-built-in source 2-convection 3-diffusion 4-transient
    * 5-first phase variable 6-interphase transport         
 TERMS(P1,Y,Y,Y,N,Y,Y)
 TERMS(U1,Y,Y,Y,Y,Y,Y)
 TERMS(W1,Y,Y,Y,Y,Y,Y)
 TERMS(KE,N,Y,Y,Y,Y,N)
 TERMS(EP,N,Y,Y,Y,Y,N)
 DIFCUT =0. ;ZDIFAC =1.
 GALA = F ;ADDDIF = F
 NEWENT = T
 ISOLX = -1 ;ISOLY = -1 ;ISOLZ = -1
 ************************************************************
  Group 9. Properties used if PRPS is not
  stored, and where PRPS = -1.0 if it is!
 RHO1 =1. ;TMP1 =0. ;EL1 = GRND4
 TSURR =0. ;TEMP0 =0. ;PRESS0 =0.
 DVO1DT =0. ;DRH1DP =0.
 EMISS =0. ;SCATT =0.
 RADIA =0. ;RADIB =0.
 EL1A =0. ;EL1B =0. ;EL1C =0.
 ENUL =1.100667E-05 ;ENUT = GRND3
 ENUTA =0. ;ENUTB =0. ;ENUTC =0.
 IENUTA = 0
 PRNDTL(U1)=1. ;PRNDTL(W1)=1.
 PRNDTL(KE)=1. ;PRNDTL(EP)=1.
 PRT(U1)=1. ;PRT(W1)=1.
 PRT(KE)=1. ;PRT(EP)=1.314
 CP1 =1. ;CP2 =1.
 ************************************************************
  Group 10.Inter-Phase Transfer Processes
 ************************************************************
  Group 11.Initial field variables (PHIs)
 FIINIT(P1)=1.3E-04 ;FIINIT(U1)=1.3
 FIINIT(W1)=13. ;FIINIT(KE)=0.7605
 FIINIT(EP)=31.777433 ;FIINIT(PRPS)=-1.
 FIINIT(ENUT)=1.0E-10
 
 PATCH(STEP ,INIVAL, 1, 10, 1, 1, 1, 5, 1, 1)
 INIT(STEP ,PRPS,0. ,199. )
 INIADD = F
 FSWEEP = 1
 NAMFI =CHAM
 ************************************************************
  Group 12. Patchwise adjustment of terms
  Patches for this group are printed with those
  for Group 13.
  Their names begin either with GP12 or &
 ************************************************************
  Group 13. Boundary & Special Sources
 
 PATCH(KESOURCE,PHASEM, 0, 0, 0, 0, 0, 0, 1, 1)
 COVAL(KESOURCE,KE , GRND4 , GRND4 )
 COVAL(KESOURCE,EP , GRND4 , GRND4 )
 
 PATCH(HOCS ,CELL , 0, 0, 0, 0, 0, 0, 1, 1)
 COVAL(HOCS ,U1 , FIXFLU , GRND1 )
 COVAL(HOCS ,W1 , FIXFLU , GRND1 )
 COVAL(HOCS ,KE , FIXFLU , GRND2 )
 COVAL(HOCS ,EP , FIXFLU , GRND2 )
 
 PATCH(INLET ,LOW , 11, 20, 1, 1, 1, 1, 1, 1)
 COVAL(INLET ,P1 , FIXFLU ,13. )
 COVAL(INLET ,U1 ,0. ,0. )
 COVAL(INLET ,W1 ,0. ,13. )
 COVAL(INLET ,KE ,0. ,0.7605 )
 COVAL(INLET ,EP ,0. ,31.777433 )
 
 PATCH(OUTLET ,HIGH , 1, 20, 1, 1, 25, 25, 1, 1)
 COVAL(OUTLET ,P1 ,1000. ,0. )
 COVAL(OUTLET ,U1 ,0. ,0. )
 COVAL(OUTLET ,W1 ,0. ,0. )
 COVAL(OUTLET ,KE ,0. ,0. )
 COVAL(OUTLET ,EP ,0. ,0. )
 
 PATCH(TOP ,EWALL , 20, 20, 1, 1, 1, 25, 1, 1)
 COVAL(TOP ,W1 , GRND2 ,0. )
 COVAL(TOP ,KE , GRND2 , GRND2 )
 COVAL(TOP ,EP , GRND2 , GRND2 )
 
 PATCH(BOT ,WWALL , 1, 1, 1, 1, 6, 25, 1, 1)
 COVAL(BOT ,W1 , GRND2 ,0. )
 COVAL(BOT ,KE , GRND2 , GRND2 )
 COVAL(BOT ,EP , GRND2 , GRND2 )
 
 PATCH(STEPL ,LWALL , 1, 10, 1, 1, 6, 6, 1, 1)
 COVAL(STEPL ,U1 , GRND2 ,0. )
 COVAL(STEPL ,KE , GRND2 , GRND2 )
 COVAL(STEPL ,EP , GRND2 , GRND2 )
 
 PATCH(STEPT ,WWALL , 11, 11, 1, 1, 1, 5, 1, 1)
 COVAL(STEPT ,W1 , GRND2 ,0. )
 COVAL(STEPT ,KE , GRND2 , GRND2 )
 COVAL(STEPT ,EP , GRND2 , GRND2 )
 XCYCLE = F
 EGWF = T
 WALLCO = GRND2
 ************************************************************
  Group 14. Downstream Pressure For PARAB
 ************************************************************
  Group 15. Terminate Sweeps
 LSWEEP = 700 ;ISWC1 = 1
 LITHYD = 1 ;LITFLX = 1 ;LITC = 1 ;ITHC1 = 1
 SELREF = T
 RESFAC =1.0E-05
 ************************************************************
  Group 16. Terminate Iterations
 LITER(P1)=20 ;LITER(U1)=10
 LITER(W1)=10 ;LITER(KE)=20
 LITER(EP)=20
 ENDIT(P1)=1.0E-03 ;ENDIT(U1)=1.0E-03
 ENDIT(W1)=1.0E-03 ;ENDIT(KE)=1.0E-03
 ENDIT(EP)=1.0E-03
 ************************************************************
  Group 17. Relaxation
 RELAX(P1,LINRLX,1.)
 RELAX(U1,FALSDT,4.689231E-04)
 RELAX(W1,FALSDT,4.689231E-04)
 RELAX(KE,FALSDT,4.689231E-04)
 RELAX(EP,FALSDT,4.689231E-04)
 RELAX(PRPS,LINRLX,1.)
 RELAX(ENUT,LINRLX,1.)
 KELIN = 1
 OVRRLX =0.
 EXPERT = F ;NNORSL = F
 ************************************************************
  Group 18. Limits
 VARMAX(P1)=1.0E+10 ;VARMIN(P1)=-1.0E+10
 VARMAX(U1)=1.0E+06 ;VARMIN(U1)=-1.0E+06
 VARMAX(W1)=1.0E+06 ;VARMIN(W1)=-1.0E+06
 VARMAX(KE)=1.0E+10 ;VARMIN(KE)=1.0E-10
 VARMAX(EP)=1.0E+10 ;VARMIN(EP)=1.0E-10
 VARMAX(PRPS)=1.0E+10 ;VARMIN(PRPS)=-1.0E+10
 VARMAX(ENUT)=1.0E+10 ;VARMIN(ENUT)=-1.0E+10
 ************************************************************
  Group 19. Data transmitted to GROUND
 GENK = T
 PARSOL = F
 ISG62 = 1
 SPEDAT(SET,SCHEME,INLCS007,I,1)
 SPEDAT(SET,SCHEME,INLCS003,I,1)
 SPEDAT(SET,SCHEME,INLCS012,I,10)
 SPEDAT(SET,SCHEME,INLCS013,I,10)
 SPEDAT(SET,GXMONI,PLOTALL,L,T)
 SPEDAT(SET,MATERIAL,199,L,T)
 ************************************************************
  Group 20. Preliminary Printout
 ************************************************************
  Group 21. Print-out of Variables
 INIFLD = F ;SUBWGR = F
    * Y in OUTPUT argument list denotes:
    * 1-field 2-correction-eq. monitor 3-selective dumping      
    * 4-whole-field residual 5-spot-value table 6-residual table
 OUTPUT(P1,Y,N,Y,Y,Y,Y)
 OUTPUT(U1,Y,N,Y,Y,Y,Y)
 OUTPUT(W1,Y,N,Y,Y,Y,Y)
 OUTPUT(KE,Y,N,Y,Y,Y,Y)
 OUTPUT(EP,Y,N,Y,Y,Y,Y)
 OUTPUT(PRPS,Y,N,Y,N,N,N)
 OUTPUT(ENUT,Y,N,Y,N,N,N)
 WALPRN = T
 ************************************************************
  Group 22. Monitor Print-Out
 IXMON = 8 ;IYMON = 1 ;IZMON = 7
 NPRMON = 100 ;NPRMNT = 1 ;TSTSWP = -1
 UWATCH = T ;USTEER = T
 HIGHLO = F
 ************************************************************
  Group 23.Field Print-Out & Plot Control
 NPRINT = 100000 ;NUMCLS = 5
 NXPRIN = -1 ;IXPRF = 1 ;IXPRL = 10000
 NZPRIN = -1 ;IZPRF = 1 ;IZPRL = 10000
 XZPR = F ;YZPR = F
 IPLTF = 1 ;IPLTL = 700 ;NPLT = 10
 ISWPRF = 1 ;ISWPRL = 100000
 ITABL = 3 ;IPROF = 1
 ABSIZ =0.5 ;ORSIZ =0.4
 NTZPRF = 1 ;NCOLPF = 50
 ICHR = 2 ;NCOLCO = 45 ;NROWCO = 20
   No PATCHes yet used for this Group
 ************************************************************
  Group 24. Dumps For Restarts
 SAVE = T ;NOWIPE = F
 NSAVE =bsxz
STOP