TALK=T;RUN(1,1)
  DISPLAY
  This problem concerns the pure convection of a step profile of
  a scalar by a unidirectional and uniform flow field, which forms
  an angle 22.5 degrees with the horizontal axis. The case is
  identical to N101 except that the simulation is performed on a
  skewed box which is inclined at 45 degrees to the horizontal.
  The grid employed is 20 by 20 and three scalars are solved, each
  of which differs according the selected scheme. The case provides
  a basic test of the higher-order schemes on non-orthogonal meshes.
  ENDDIS
  PHOTON USE
    P



     0.20443E+04 0.15633E+04 CR
  gr z 1;vec z 1 sh
  msg Velocity vectors & mesh
  msg press  to continue
  pause
  cl;gr ou z 1;con USOL z 1 fi;.01
  msg Upwind Differencing Scheme
  msg press  to continue
  pause
  cl;con QSOL z 1 fi;.01
  msg QUICK Scheme
  msg press  to continue
  pause
  cl;con BSOL z 1 fi;.01
  msg Superbee Scheme
  msg press  to end
  pause
  ENDUSE
 ************************************************************
  Group 1. Run Title and Number
 ************************************************************
 ************************************************************
 
 TEXT(YX BFC DIAGONAL SCALAR CONVECTION       )
 
 ************************************************************
 ************************************************************
 
 IRUNN = 1 ;LIBREF = 14
 ************************************************************
  Group 2. Time dependence
 STEADY = T
 ************************************************************
  Group 3. X-Direction Grid Spacing
 CARTES = T
 NX = 20
 XULAST =1.
 ************************************************************
  Group 4. Y-Direction Grid Spacing
 NY = 20
 YVLAST =1.
 ************************************************************
  Group 5. Z-Direction Grid Spacing
 PARAB = F
 NZ = 1
 ZWLAST =0.1
 ************************************************************
  Group 6. Body-Fitted Coordinates
 BFC = T ;NONORT = T
 NCRT = -1
 RSTGEO = F ;SAVGEO = F
 UUP = F ;VUP = F ;WUP = F
 NGEOM =CHAM
 NAMXYZ =CHAM
 ANGMIN =20.
 DOMAIN(   1,  21,   1,  21,   1,   1)
    * Set fixed sub-domain
 FIXDOM(   1,   0,   0,   0,   0,   0,   0)
 FIXDOM(   2,   0,   0,   0,   0,   0,   0)
 FIXDOM(   3,   0,   0,   0,   0,   0,   0)
 FIXDOM(   4,   0,   0,   0,   0,   0,   0)
 FIXDOM(   5,   0,   0,   0,   0,   0,   0)
 FIXDOM(   6,   0,   0,   0,   0,   0,   0)
 FIXDOM(   7,   0,   0,   0,   0,   0,   0)
 FIXDOM(   8,   0,   0,   0,   0,   0,   0)
 FIXDOM(   9,   0,   0,   0,   0,   0,   0)
 FIXDOM(  10,   0,   0,   0,   0,   0,   0)
 LIJ = F ;LJK = T ;LIK = F
 IMON = 11 ;JMON = 11 ;KMON = 1
 ************************************************************
  Group 7. Variables: STOREd,SOLVEd,NAMEd
 ONEPHS = T
 NAME(1)=P1 ;NAME(3)=U1
 NAME(5)=V1 ;NAME(16)=USOL
 NAME(17)=QSOL ;NAME(18)=BSOL
 NAME(146)=VCMP ;NAME(147)=UCMP
 NAME(148)=WCRT ;NAME(149)=VCRT
 NAME(150)=UCRT
    * Y in SOLUTN argument list denotes:
    * 1-stored 2-solved 3-whole-field
    * 4-point-by-point 5-explicit 6-harmonic averaging 
 SOLUTN(P1,Y,Y,Y,N,N,N)
 SOLUTN(U1,Y,Y,N,N,N,Y)
 SOLUTN(V1,Y,Y,N,N,N,Y)
 SOLUTN(USOL,Y,Y,N,N,N,N)
 SOLUTN(QSOL,Y,Y,N,N,N,N)
 SOLUTN(BSOL,Y,Y,N,N,N,N)
 SOLUTN(VCMP,Y,N,N,N,N,N)
 SOLUTN(UCMP,Y,N,N,N,N,N)
 SOLUTN(WCRT,Y,N,N,N,N,Y)
 SOLUTN(VCRT,Y,N,N,N,N,Y)
 SOLUTN(UCRT,Y,N,N,N,N,Y)
 ************************************************************
  Group 8. Terms & Devices
    * Y in TERMS argument list denotes:
    * 1-built-in source 2-convection 3-diffusion 4-transient
    * 5-first phase variable 6-interphase transport         
 TERMS(P1,Y,Y,Y,N,Y,Y)
 TERMS(U1,Y,Y,Y,Y,Y,Y)
 TERMS(V1,Y,Y,Y,Y,Y,Y)
 TERMS(USOL,N,Y,Y,Y,Y,Y)
 TERMS(QSOL,N,Y,Y,Y,N,Y)
 TERMS(BSOL,N,Y,Y,Y,Y,Y)
 DIFCUT =0. ;ZDIFAC =1.
 GALA = F ;ADDDIF = F
 ISOLX = -1 ;ISOLY = -1 ;ISOLZ = -1
 ************************************************************
  Group 9. Properties used if PRPS is not
  stored, and where PRPS = -1.0 if it is!
 RHO1 =1.161 ;TMP1 =0.
 EL1 =0.
 TSURR =0. ;TEMP0 =0.
 PRESS0 =0.
 DVO1DT =0. ;DRH1DP =0.
 EMISS =0. ;SCATT =0.
 RADIA =0. ;RADIB =0.
 ENUL =1.589E-05 ;ENUT =0.
 PRNDTL(U1)=1. ;PRNDTL(V1)=1.
 PRNDTL(USOL)=1. ;PRNDTL(QSOL)=1.
 PRNDTL(BSOL)=1.
 PRT(U1)=1. ;PRT(V1)=1.
 PRT(USOL)=1. ;PRT(QSOL)=1.
 PRT(BSOL)=1.
 CP1 =1. ;CP2 =1.
 ************************************************************
  Group 10.Inter-Phase Transfer Processes
 ************************************************************
  Group 11.Initial field variables (PHIs)
 FIINIT(P1)=1.0E-10 ;FIINIT(U1)=0.92388
 FIINIT(V1)=0.923871 ;FIINIT(USOL)=1.0E-10
 FIINIT(QSOL)=1.0E-10 ;FIINIT(BSOL)=1.0E-10
 FIINIT(VCMP)=1.0E-10 ;FIINIT(UCMP)=1.0E-10
 FIINIT(WCRT)=1.0E-10 ;FIINIT(VCRT)=0.382683
 FIINIT(UCRT)=0.92388
   No PATCHes yet used for this Group
 INIADD = F
 FSWEEP = 1
 NAMFI =CHAM
 ************************************************************
  Group 12. Patchwise adjustment of terms
  Patches for this group are printed with those
  for Group 13.
  Their names begin either with GP12 or &
 ************************************************************
  Group 13. Boundary & Special Sources
 
 PATCH(HOCS ,CELL , 0, 0, 0, 0, 0, 0, 1, 1)
 COVAL(HOCS ,U1 , FIXFLU , GRND2 )
 COVAL(HOCS ,V1 , FIXFLU , GRND2 )
 COVAL(HOCS ,QSOL, FIXFLU , GRND1 )
 COVAL(HOCS ,BSOL, FIXFLU , GRND2 )
 
 PATCH(BFCINB ,SOUTH , 1, 20, 1, 1, 1, 1, 1, 1)
 COVAL(BFCINB ,P1 , FIXFLU , GRND1 )
 COVAL(BFCINB ,U1 ,0. , GRND1 )
 COVAL(BFCINB ,V1 ,0. , GRND1 )
 COVAL(BFCINB ,USOL,0. ,1. )
 COVAL(BFCINB ,QSOL,0. ,1. )
 COVAL(BFCINB ,BSOL,0. ,1. )
 COVAL(BFCINB ,VCRT,0. ,0.382683 )
 COVAL(BFCINB ,UCRT,0. ,0.92388 )
 
 PATCH(BFCINS ,WEST , 1, 1, 1, 20, 1, 1, 1, 1)
 COVAL(BFCINS ,P1 , FIXFLU , GRND1 )
 COVAL(BFCINS ,U1 ,0. , GRND1 )
 COVAL(BFCINS ,V1 ,0. , GRND1 )
 COVAL(BFCINS ,USOL,0. ,0. )
 COVAL(BFCINS ,QSOL,0. ,0. )
 COVAL(BFCINS ,BSOL,0. ,0. )
 COVAL(BFCINS ,VCRT,0. ,0.382683 )
 COVAL(BFCINS ,UCRT,0. ,0.92388 )
 
 PATCH(OUTT ,NORTH , 1, 20, 20, 20, 1, 1, 1, 1)
 COVAL(OUTT ,P1 ,1000. ,0. )
 COVAL(OUTT ,U1 ,0. , SAME )
 COVAL(OUTT ,V1 ,0. , SAME )
 COVAL(OUTT ,USOL,0. , SAME )
 COVAL(OUTT ,QSOL,0. , SAME )
 COVAL(OUTT ,BSOL,0. , SAME )
 
 PATCH(OUTS ,EAST , 20, 20, 1, 20, 1, 1, 1, 1)
 COVAL(OUTS ,P1 ,1000. ,0. )
 COVAL(OUTS ,U1 ,0. , SAME )
 COVAL(OUTS ,V1 ,0. , SAME )
 COVAL(OUTS ,USOL,0. , SAME )
 COVAL(OUTS ,QSOL,0. , SAME )
 COVAL(OUTS ,BSOL,0. , SAME )
 XCYCLE = F
 EGWF = T
 WALLCO = GRND2
 BFCA =1.161
 ************************************************************
  Group 14. Downstream Pressure For PARAB
 ************************************************************
  Group 15. Terminate Sweeps
 LSWEEP = 1000 ;ISWC1 = 1
 LITHYD = 1 ;LITFLX = 1 ;LITC = 1 ;ITHC1 = 1
 SELREF = T
 RESFAC =1.0E-04
 ************************************************************
  Group 16. Terminate Iterations
 LITER(P1)=20 ;LITER(U1)=10
 LITER(V1)=10 ;LITER(USOL)=20
 LITER(QSOL)=20 ;LITER(BSOL)=20
 ENDIT(P1)=1.0E-03 ;ENDIT(U1)=1.0E-03
 ENDIT(V1)=1.0E-03 ;ENDIT(USOL)=1.0E-03
 ENDIT(QSOL)=1.0E-03 ;ENDIT(BSOL)=1.0E-03
 ************************************************************
  Group 17. Relaxation
 RELAX(P1,LINRLX,0.5)
 RELAX(U1,FALSDT,1.)
 RELAX(V1,FALSDT,1.)
 RELAX(USOL,FALSDT,1.)
 RELAX(QSOL,FALSDT,1.)
 RELAX(BSOL,FALSDT,0.1)
 RELAX(VCMP,LINRLX,1.0E+09)
 RELAX(UCMP,LINRLX,1.0E+09)
 RELAX(WCRT,LINRLX,1.)
 RELAX(VCRT,LINRLX,1.)
 RELAX(UCRT,LINRLX,1.)
 OVRRLX =0.
 EXPERT = F ;NNORSL = F
 ************************************************************
  Group 18. Limits
 VARMAX(P1)=1.0E+10 ;VARMIN(P1)=-1.0E+10
 VARMAX(U1)=1.0E+06 ;VARMIN(U1)=-1.0E+06
 VARMAX(V1)=1.0E+06 ;VARMIN(V1)=-1.0E+06
 VARMAX(USOL)=1.0E+10 ;VARMIN(USOL)=-1.0E+10
 VARMAX(QSOL)=1.0E+10 ;VARMIN(QSOL)=-1.0E+10
 VARMAX(BSOL)=1.0E+10 ;VARMIN(BSOL)=-1.0E+10
 VARMAX(VCMP)=1.0E+10 ;VARMIN(VCMP)=-1.0E+10
 VARMAX(UCMP)=1.0E+10 ;VARMIN(UCMP)=-1.0E+10
 VARMAX(WCRT)=1.0E+10 ;VARMIN(WCRT)=-1.0E+10
 VARMAX(VCRT)=1.0E+10 ;VARMIN(VCRT)=-1.0E+10
 VARMAX(UCRT)=1.0E+10 ;VARMIN(UCRT)=-1.0E+10
 ************************************************************
  Group 19. Data transmitted to GROUND
 PARSOL = F
 ISG62 = 1
 SPEDAT(SET,SCHEME,INLCS003,I,13)
 SPEDAT(SET,SCHEME,INLCS005,I,13)
 SPEDAT(SET,SCHEME,INLCS017,I,4)
 SPEDAT(SET,SCHEME,INLCS018,I,14)
 ************************************************************
  Group 20. Preliminary Printout
 ************************************************************
  Group 21. Print-out of Variables
 INIFLD = F ;SUBWGR = F
    * Y in OUTPUT argument list denotes:
    * 1-field 2-correction-eq. monitor 3-selective dumping      
    * 4-whole-field residual 5-spot-value table 6-residual table
 OUTPUT(P1,Y,N,Y,Y,Y,Y)
 OUTPUT(U1,Y,N,Y,Y,Y,Y)
 OUTPUT(V1,Y,N,Y,Y,Y,Y)
 OUTPUT(USOL,Y,N,Y,Y,Y,Y)
 OUTPUT(QSOL,Y,N,Y,Y,Y,Y)
 OUTPUT(BSOL,Y,N,Y,Y,Y,Y)
 OUTPUT(VCMP,N,N,Y,Y,N,N)
 OUTPUT(UCMP,N,N,Y,Y,N,N)
 OUTPUT(WCRT,Y,N,Y,N,N,N)
 OUTPUT(VCRT,Y,N,Y,N,N,N)
 OUTPUT(UCRT,Y,N,Y,N,N,N)
 ************************************************************
  Group 22. Monitor Print-Out
 IXMON = 11 ;IYMON = 11 ;IZMON = 1
 NPRMON = 100000 ;NPRMNT = 1 ;TSTSWP = -1
 UWATCH = T ;USTEER = T
 HIGHLO = F
 ************************************************************
  Group 23.Field Print-Out & Plot Control
 NPRINT = 100000 ;NUMCLS = 5
 NXPRIN = -1 ;IXPRF = 1 ;IXPRL = 10000
 NYPRIN = -1 ;IYPRF = 1 ;IYPRL = 10000
 IPLTF = 1 ;IPLTL = -1 ;NPLT = 1
 ISWPRF = 1 ;ISWPRL = 100000
 ITABL = 3 ;IPROF = 1
 ABSIZ =0.5 ;ORSIZ =0.4
 NTZPRF = 1 ;NCOLPF = 50
 ICHR = 2 ;NCOLCO = 45 ;NROWCO = 20
   No PATCHes yet used for this Group
 ************************************************************
  Group 24. Dumps For Restarts
 SAVE = T ;NOWIPE = F
 NSAVE =CHAM
STOP