TALK=T;RUN(1,1)
  PLANTBEGIN
PATCH(SS050U,EAST,1,NX,1,NY,1,NZ,1,lstep)
   CO=1.e10
   VAL= RG(10)*(YG2D-RG(12))
COVAL(SS050U,U1,GRND,GRND)

PATCH(SS050V,NORTH,1,NX,1,NY,1,NZ,1,lstep)
   CO=1.e10
   VAL=-RG(10)*(XG2D-RG(11))
COVAL(SS050V,V1,GRND,GRND)

PATCH(RELAX,PHASEM,1,NX,1,NY,1,NZ,1,1)
   CO=SQRT(U1**2+W1**2+V1**2)/              AMIN1(DXU2D*1,A$
MIN1(DYV2D*1,DZ*1))+              RG(99)/AMIN1(DXU2D*1,AMIN1(DYV2D*$
1,DZ*1))**2
COVAL(RELAX,U1,GRND,SAME)
   CO=SQRT(U1**2+W1**2+V1**2)/              AMIN1(DXU2D*1,A$
MIN1(DYV2D*1,DZ*1))+              RG(99)/AMIN1(DXU2D*1,AMIN1(DYV2D*$
1,DZ*1))**2
COVAL(RELAX,V1,GRND,SAME)
   CO=SQRT(U1**2+W1**2+V1**2)/              AMIN1(DXU2D*1,A$
MIN1(DYV2D*1,DZ*1))+              RG(99)/AMIN1(DXU2D*1,AMIN1(DYV2D*$
1,DZ*1))**2
COVAL(RELAX,W1,GRND,SAME)
STORE(TFAL);OUTPUT(TFAL,Y,Y,Y,Y,Y,Y)
   TFAL=1/(SQRT(U1**2+W1**2+V1**2)/               AMIN1(DXU$
2D*1,AMIN1(DYV2D*1,DZ*1))+               RG(99)/AMIN1(DXU2D*1,AMIN1$
(DYV2D*1,DZ*1))**2)
STORE(CONT,ISTP)

   ISTP=FLOAT(ISTEP)*           AMAX1(AMIN1(1.0,5.-FLOAT(IS$
TEP)),0.0)

   CONT=ISTP+AMAX1(0.0,FLOAT(ISTEP)-4.)

   MARK=RG(7)*AMAX1(0.0,1.-CONT)
  REGION(8,8,4,7,6,10)

   MARK=RG(7)*AMAX1(0.0,1.-CONT)
  REGION(8,8,9,12,6,10)

   MARK=RG(7)*AMAX1(0.0,2.-CONT)
  REGION(4,7,8,8,6,10)

   MARK=RG(7)*AMAX1(0.0,2.-CONT)
  REGION(9,12,8,8,6,10)

   MARK=RG(7)*AMAX1(-AMIN1(0.0,1.-CONT),0.0)
  REGION(8,8,4,7,6,10)

   MARK=RG(7)*AMAX1(-AMIN1(0.0,1.-CONT),0.0)
  REGION(8,8,9,12,6,10)

   MARK=MARK+2.*RG(7)*AMIN1(0.0,2.-CONT)
  REGION(8,8,4,7,6,10)

   MARK=MARK+2.*RG(7)*AMIN1(0.0,2.-CONT)
  REGION(8,8,9,12,6,10)

   MARK=MARK-RG(7)*AMIN1(0.0,2.-CONT)
  REGION(4,7,8,8,6,10)

   MARK=MARK-RG(7)*AMIN1(0.0,2.-CONT)
  REGION(9,12,8,8,6,10)

   MARK=MARK-2.*RG(7)*AMIN1(0.0,3.-CONT)
  REGION(8,8,4,7,6,10)

   MARK=MARK-2.*RG(7)*AMIN1(0.0,3.-CONT)
  REGION(8,8,9,12,6,10)

   MARK=MARK+2.*RG(7)*AMIN1(0.0,3.-CONT)
  REGION(4,7,8,8,6,10)

   MARK=MARK+2.*RG(7)*AMIN1(0.0,3.-CONT)
  REGION(9,12,8,8,6,10)
  PLANTEND
  PHOTON USE
  p
  p1;

  con mark z 8 sh
  25 25.1 0;int 1
  1
  gr ou z 8;gr ou y 8;gr ou y m;gr ou z m;gr ou x m
  vec y 8 sh;vec z 8 sh
  msg at 1 sec.
  pause
  p
  p2;

  con mark z 8 sh
  25 25.1 0;int 1
  1
  gr ou z 8;gr ou y 8;gr ou y m;gr ou z m;gr ou x m
  vec y 8 sh;vec z 8 sh
  msg at 2 sec.
  pause
  p
  p3;

  con mark z 8 sh
  25 25.1 0;int 1
  1
  gr ou z 8;gr ou y 8;gr ou y m;gr ou z m;gr ou x m
  vec y 8 sh;vec z 8 sh
  msg at 3 sec.
  pause
  p
  p4;

  con mark z 8 sh
  25 25.1 0;int 1
  1
  gr ou z 8;gr ou y 8;gr ou y m;gr ou z m;gr ou x m
  vec y 8 sh;vec z 8 sh
  msg at 4 sec.
  pause
  p
  p5;

  con mark z 8 sh
  25 25.1 0;int 1
  1
  gr ou z 8;gr ou y 8;gr ou y m;gr ou z m;gr ou x m
  vec y 8 sh;vec z 8 sh
  msg at 5 sec.
  pause
  p
  p6;

  con mark z 8 sh
  25 25.1 0;int 1
  1
  gr ou z 8;gr ou y 8;gr ou y m;gr ou z m;gr ou x m
  vec y 8 sh;vec z 8 sh
  msg at 6 sec.
  pause
  p
  p7;

  con mark z 8 sh
  25 25.1 0;int 1
  1
  gr ou z 8;gr ou y 8;gr ou y m;gr ou z m;gr ou x m
  vec y 8 sh;vec z 8 sh
  msg at 7 sec.
  pause
  p
  p8;

  con mark z 8 sh
  25 25.1 0;int 1
  1
  gr ou z 8;gr ou y 8;gr ou y m;gr ou z m;gr ou x m
  vec y 8 sh;vec z 8 sh
  msg at 8 sec.
  ENDUSE
 ************************************************************
  Group 1. Run Title and Number
 ************************************************************
 ************************************************************
 
 TEXT( Flow in stirred 3D vessel              )
 
 ************************************************************
 ************************************************************
 
 IRUNN = 1 ;LIBREF = 116
 ************************************************************
  Group 2. Time dependence
 STEADY = F
    * Set overall time and no. of steps
 TFIRST =0. ;TLAST =8.
 FSTEP = 1 ;LSTEP = 8
 TFRAC(1)=0.125 ;TFRAC(2)=0.25
 TFRAC(3)=0.375 ;TFRAC(4)=0.5
 TFRAC(5)=0.625 ;TFRAC(6)=0.75
 TFRAC(7)=0.875 ;TFRAC(8)=1.
 ************************************************************
  Group 3. X-Direction Grid Spacing
 CARTES = T
 NX = 15
 XULAST =15.
 XFRAC(1)=0.066667 ;XFRAC(2)=0.133333
 XFRAC(3)=0.2 ;XFRAC(4)=0.266667
 XFRAC(5)=0.333333 ;XFRAC(6)=0.4
 XFRAC(7)=0.466667 ;XFRAC(8)=0.533333
 XFRAC(9)=0.6 ;XFRAC(10)=0.666667
 XFRAC(11)=0.733333 ;XFRAC(12)=0.8
 XFRAC(13)=0.866667 ;XFRAC(14)=0.933333
 XFRAC(15)=1.
 ************************************************************
  Group 4. Y-Direction Grid Spacing
 NY = 15
 YVLAST =15.
 YFRAC(1)=0.066667 ;YFRAC(2)=0.133333
 YFRAC(3)=0.2 ;YFRAC(4)=0.266667
 YFRAC(5)=0.333333 ;YFRAC(6)=0.4
 YFRAC(7)=0.466667 ;YFRAC(8)=0.533333
 YFRAC(9)=0.6 ;YFRAC(10)=0.666667
 YFRAC(11)=0.733333 ;YFRAC(12)=0.8
 YFRAC(13)=0.866667 ;YFRAC(14)=0.933333
 YFRAC(15)=1.
 ************************************************************
  Group 5. Z-Direction Grid Spacing
 PARAB = F
 NZ = 15
 ZWLAST =15.
 ZFRAC(1)=0.066667 ;ZFRAC(2)=0.133333
 ZFRAC(3)=0.2 ;ZFRAC(4)=0.266667
 ZFRAC(5)=0.333333 ;ZFRAC(6)=0.4
 ZFRAC(7)=0.466667 ;ZFRAC(8)=0.533333
 ZFRAC(9)=0.6 ;ZFRAC(10)=0.666667
 ZFRAC(11)=0.733333 ;ZFRAC(12)=0.8
 ZFRAC(13)=0.866667 ;ZFRAC(14)=0.933333
 ZFRAC(15)=1.
 ************************************************************
  Group 6. Body-Fitted Coordinates
 ************************************************************
  Group 7. Variables: STOREd,SOLVEd,NAMEd
 ONEPHS = T
 NAME(1)=P1 ;NAME(3)=U1
 NAME(5)=V1 ;NAME(7)=W1
 NAME(147)=ISTP ;NAME(148)=CONT
 NAME(149)=TFAL ;NAME(150)=MARK
    * Y in SOLUTN argument list denotes:
    * 1-stored 2-solved 3-whole-field
    * 4-point-by-point 5-explicit 6-harmonic averaging 
 SOLUTN(P1,Y,Y,N,N,N,Y)
 SOLUTN(U1,Y,Y,N,N,N,Y)
 SOLUTN(V1,Y,Y,N,N,N,Y)
 SOLUTN(W1,Y,Y,N,N,N,Y)
 SOLUTN(ISTP,Y,N,N,N,N,Y)
 SOLUTN(CONT,Y,N,N,N,N,Y)
 SOLUTN(TFAL,Y,N,N,N,N,Y)
 SOLUTN(MARK,Y,N,N,N,N,Y)
 ************************************************************
  Group 8. Terms & Devices
    * Y in TERMS argument list denotes:
    * 1-built-in source 2-convection 3-diffusion 4-transient
    * 5-first phase variable 6-interphase transport         
 TERMS(P1,Y,Y,Y,N,Y,Y)
 TERMS(U1,Y,Y,Y,Y,Y,Y)
 TERMS(V1,Y,Y,Y,Y,Y,Y)
 TERMS(W1,Y,Y,Y,Y,Y,Y)
 DIFCUT =0.5 ;ZDIFAC =1.
 GALA = F ;ADDDIF = F
 ISOLX = -1 ;ISOLY = -1 ;ISOLZ = -1
 ************************************************************
  Group 9. Properties used if PRPS is not
  stored, and where PRPS = -1.0 if it is!
 RHO1 =1000. ;TMP1 =0. ;EL1 =0.
 TSURR =0. ;TEMP0 =0. ;PRESS0 =0.
 DVO1DT =0. ;DRH1DP =0.
 EMISS =0. ;SCATT =0.
 RADIA =0. ;RADIB =0.
 ENUL =1. ;ENUT =0.
 PRNDTL(U1)=1. ;PRNDTL(V1)=1.
 PRNDTL(W1)=1.
 PRT(U1)=1. ;PRT(V1)=1.
 PRT(W1)=1.
 CP1 =1. ;CP2 =1.
 ************************************************************
  Group 10.Inter-Phase Transfer Processes
 ************************************************************
  Group 11.Initial field variables (PHIs)
 FIINIT(P1)=0. ;FIINIT(U1)=0.
 FIINIT(V1)=0. ;FIINIT(W1)=0.
 FIINIT(ISTP)=1.0E-10 ;FIINIT(CONT)=1.0E-10
 FIINIT(TFAL)=1.0E-10 ;FIINIT(MARK)=0.
 
 PATCH(INIBLADE,INIVAL, 8, 8, 4, 12, 6, 10, 6, 10)
 INIT(INIBLADE,MARK,0. ,50. )
 INIADD = F
 FSWEEP = 1
 NAMFI =CHAM
 ************************************************************
  Group 12. Patchwise adjustment of terms
  Patches for this group are printed with those
  for Group 13.
  Their names begin either with GP12 or &
 ************************************************************
  Group 13. Boundary & Special Sources
 
 PATCH(PRESREL ,CELL , 15, 15, 15, 15, 15, 15, 1, 8)
 COVAL(PRESREL ,P1 ,1000. ,0. )
 
 PATCH(SS050U ,EAST , 1, 15, 1, 15, 1, 15, 1, 8)
 COVAL(SS050U ,U1 , GRND , GRND )
 
 PATCH(SS050V ,NORTH , 1, 15, 1, 15, 1, 15, 1, 8)
 COVAL(SS050V ,V1 , GRND , GRND )
 
 PATCH(RELAX ,PHASEM, 1, 15, 1, 15, 1, 15, 1, 1)
 COVAL(RELAX ,U1 , GRND , SAME )
 COVAL(RELAX ,V1 , GRND , SAME )
 COVAL(RELAX ,W1 , GRND , SAME )
 XCYCLE = F
 EGWF = T
 WALLCO = GRND2
 ************************************************************
  Group 14. Downstream Pressure For PARAB
 ************************************************************
  Group 15. Terminate Sweeps
 LSWEEP = 50 ;ISWC1 = 1
 LITHYD = 1 ;LITFLX = 1 ;LITC = 1 ;ITHC1 = 1
 SELREF = T
 RESFAC =1.0E-02
 ************************************************************
  Group 16. Terminate Iterations
 LITER(P1)=20 ;LITER(U1)=10
 LITER(V1)=10 ;LITER(W1)=10
 ENDIT(P1)=1.0E-03 ;ENDIT(U1)=1.0E-03
 ENDIT(V1)=1.0E-03 ;ENDIT(W1)=1.0E-03
 ************************************************************
  Group 17. Relaxation
 RELAX(P1,LINRLX,0.5)
 RELAX(U1,FALSDT,1.)
 RELAX(V1,FALSDT,1.)
 RELAX(W1,FALSDT,1.)
 RELAX(ISTP,LINRLX,1.)
 RELAX(CONT,LINRLX,1.)
 RELAX(TFAL,LINRLX,1.)
 RELAX(MARK,LINRLX,1.)
 OVRRLX =0.
 EXPERT = F ;NNORSL = F
 ************************************************************
  Group 18. Limits
 VARMAX(P1)=1.0E+10 ;VARMIN(P1)=-1.0E+10
 VARMAX(U1)=1.0E+06 ;VARMIN(U1)=-1.0E+06
 VARMAX(V1)=1.0E+06 ;VARMIN(V1)=-1.0E+06
 VARMAX(W1)=1.0E+06 ;VARMIN(W1)=-1.0E+06
 VARMAX(ISTP)=1.0E+10 ;VARMIN(ISTP)=-1.0E+10
 VARMAX(CONT)=1.0E+10 ;VARMIN(CONT)=-1.0E+10
 VARMAX(TFAL)=1.0E+10 ;VARMIN(TFAL)=-1.0E+10
 VARMAX(MARK)=1.0E+10 ;VARMIN(MARK)=-1.0E+10
 ************************************************************
  Group 19. Data transmitted to GROUND
 NAMSAT =MOSG
 PARSOL = F
 ISG62 = 1
 SPEDAT(SET,GXMONI,TRANSIENT,L,F)
 SPEDAT(SET,GXMONI,PLOTALL,L,T)
 RG( 7) =50.
 RG( 10) =0.25
 RG( 11) =7.5
 RG( 12) =7.5
 RG( 99) =1.
 ************************************************************
  Group 20. Preliminary Printout
 DISTIL = T ;NULLPR = F
 NDST = 0
 DSTTOL =1.0E-02
 EX(P1)=101. ;EX(U1)=0.1093
 EX(V1)=0.1072 ;EX(W1)=0.02242
 EX(ISTP)=0. ;EX(CONT)=4.
 EX(TFAL)=0.8665 ;EX(MARK)=0.6667
 ************************************************************
  Group 21. Print-out of Variables
 INIFLD = F ;SUBWGR = F
    * Y in OUTPUT argument list denotes:
    * 1-field 2-correction-eq. monitor 3-selective dumping      
    * 4-whole-field residual 5-spot-value table 6-residual table
 OUTPUT(P1,Y,N,Y,Y,Y,Y)
 OUTPUT(U1,Y,N,Y,Y,Y,Y)
 OUTPUT(V1,Y,N,Y,Y,Y,Y)
 OUTPUT(W1,Y,N,Y,Y,Y,Y)
 OUTPUT(ISTP,Y,N,Y,N,N,N)
 OUTPUT(CONT,Y,N,Y,N,N,N)
 OUTPUT(TFAL,Y,Y,Y,Y,Y,Y)
 OUTPUT(MARK,Y,N,Y,N,N,N)
 ************************************************************
  Group 22. Monitor Print-Out
 IXMON = 8 ;IYMON = 8 ;IZMON = 8
 NPRMON = 50 ;NPRMNT = 1 ;TSTSWP = -1
 UWATCH = T ;USTEER = T
 HIGHLO = F
 ************************************************************
  Group 23.Field Print-Out & Plot Control
 NPRINT = 100000 ;NUMCLS = 5
 NTPRIN = 100000 ;ISTPRF = 1 ;ISTPRL = 100000
 NXPRIN = -1 ;IXPRF = 1 ;IXPRL = 10000
 NYPRIN = -1 ;IYPRF = 1 ;IYPRL = 10000
 NZPRIN = -1 ;IZPRF = 1 ;IZPRL = 10000
 XZPR = F ;YZPR = F
 IPLTF = 1 ;IPLTL = -1 ;NPLT = -1
 ISWPRF = 1 ;ISWPRL = 100000
 ITABL = 3 ;IPROF = 1
 ABSIZ =0.5 ;ORSIZ =0.4
 NTZPRF = 1 ;NCOLPF = 50
 ICHR = 2 ;NCOLCO = 45 ;NROWCO = 20
   No PATCHes yet used for this Group
 ************************************************************
  Group 24. Dumps For Restarts
 SAVE = T ;NOWIPE = F
 NSAVE =CHAM
 IDISPA = 1 ;IDISPB = 0 ;IDISPC = 0
 CSG1    ='P'
STOP