TALK=T;RUN(1,1)
  PHOTON USE
  p



  msg       ******************************************************
  msg       *  Note:                                             *
  msg       *               ========                             *
  msg       *  Inspect the result file of d_priv1 to see the     *
  msg       *  numerical data.                                   *
  msg       *  The contours illustrate the solution.             *
  msg       ******************************************************
  msg Press Enter to continue
  pause;cl
  gr ou z 1
  con c1 z 1 fil;0.01
  msg                     C1  CONTOURS
  msg Press Enter to continue
  pause
  con off;red
  con plnt z 1 fil;0.01
  msg                     PLANT CONTOURS
  MSG Press E to end
  ENDUSE
  DISPLAY
    This run  shows  the  PLANT  equivalents  of  standard PHOENICS
    settings  to  introduce  the  sources   of   linearized   form.
    One-dimensional convection-diffusion problem can also be tested
    against exact solution.

     ==============================================
   Governing equation:

     d(RHO*U*C)/dX = d(GAMMA*dC/dX) -SIGMA*C + SOURCE

   Boundary conditions:

     X =  0   , C = Cfix
     X -> -oo , dC/dX = 0
     X -> +oo , dC/dX = 0
      =============================================
  ENDDIS
  PLANTBEGIN
PATCH(INLET,WEST,1,1,1,NY,1,NZ,1,LSTEP)
COVAL(INLET,C1,1.*1.,SAME)
    VAL=PLNT
COVAL(INLET,PLNT,1.*1.,GRND)

PATCH(ABSORB,VOLUME,1,NX,1,NY,1,NZ,1,LSTEP)
COVAL(ABSORB,C1,RG(1),0.0)
    CO=RG(1)
COVAL(ABSORB,PLNT,GRND,0.0)

PATCH(SORCE,VOLUME,1,NX,1,NY,1,NZ,1,LSTEP)
COVAL(SORCE,C1,FIXFLU,RG(2))
    VAL=RG(2)
COVAL(SORCE,PLNT,FIXFLU,GRND)

PATCH(SPIL,CELL,(NX-1)/2+1,(NX-1)/2+1,1,NY,1,NZ,1,LSTEP)
COVAL(SPIL,C1,FIXVAL,RG(3))
    VAL=RG(3)
COVAL(SPIL,PLNT,FIXVAL,GRND)
  PLANTEND
 ************************************************************
  Group 1. Run Title and Number
 ************************************************************
 ************************************************************
 
 TEXT(1D uniform flow dispersion:121          )
 
 ************************************************************
 ************************************************************
 
 IRUNN = 1 ;LIBREF = 121
 ************************************************************
  Group 2. Time dependence
 STEADY = T
 ************************************************************
  Group 3. X-Direction Grid Spacing
 CARTES = T
 NX = 11
 XULAST =11.
 XFRAC(1)=0.090909 ;XFRAC(2)=0.181818
 XFRAC(3)=0.272727 ;XFRAC(4)=0.363636
 XFRAC(5)=0.454545 ;XFRAC(6)=0.545455
 XFRAC(7)=0.636364 ;XFRAC(8)=0.727273
 XFRAC(9)=0.818182 ;XFRAC(10)=0.909091
 XFRAC(11)=1.
 ************************************************************
  Group 4. Y-Direction Grid Spacing
 NY = 2
 YVLAST =2.
 YFRAC(1)=0.5 ;YFRAC(2)=1.
 ************************************************************
  Group 5. Z-Direction Grid Spacing
 PARAB = F
 NZ = 1
 ZWLAST =1.
 ZFRAC(1)=1.
 ************************************************************
  Group 6. Body-Fitted Coordinates
 ************************************************************
  Group 7. Variables: STOREd,SOLVEd,NAMEd
 ONEPHS = T
 NAME(3)=U1 ;NAME(5)=V1
 NAME(16)=C1 ;NAME(150)=PLNT
    * Y in SOLUTN argument list denotes:
    * 1-stored 2-solved 3-whole-field
    * 4-point-by-point 5-explicit 6-harmonic averaging 
 SOLUTN(U1,Y,N,N,N,N,Y)
 SOLUTN(V1,Y,N,N,N,N,Y)
 SOLUTN(C1,Y,Y,N,N,N,Y)
 SOLUTN(PLNT,Y,Y,N,N,N,Y)
 ************************************************************
  Group 8. Terms & Devices
    * Y in TERMS argument list denotes:
    * 1-built-in source 2-convection 3-diffusion 4-transient
    * 5-first phase variable 6-interphase transport         
 TERMS(C1,N,Y,Y,Y,Y,N)
 TERMS(PLNT,N,Y,Y,Y,Y,N)
 DIFCUT =0.5 ;ZDIFAC =1.
 GALA = F ;ADDDIF = F
 ISOLX = -1 ;ISOLY = -1 ;ISOLZ = -1
 ************************************************************
  Group 9. Properties used if PRPS is not
  stored, and where PRPS = -1.0 if it is!
 RHO1 =1. ;TMP1 =0.
 EL1 =0.
 TSURR =0. ;TEMP0 =0.
 PRESS0 =0.
 DVO1DT =0. ;DRH1DP =0.
 EMISS =0. ;SCATT =0.
 RADIA =0. ;RADIB =0.
 ENUL =1. ;ENUT =0.
 PRNDTL(C1)=1. ;PRNDTL(PLNT)=1.
 PRT(C1)=1. ;PRT(PLNT)=1.
 CP1 =1. ;CP2 =1.
 ************************************************************
  Group 10.Inter-Phase Transfer Processes
 ************************************************************
  Group 11.Initial field variables (PHIs)
 FIINIT(U1)=1. ;FIINIT(V1)=0.
 FIINIT(C1)=1. ;FIINIT(PLNT)=1.
   No PATCHes yet used for this Group
 INIADD = F
 FSWEEP = 1
 NAMFI =CHAM
 ************************************************************
  Group 12. Patchwise adjustment of terms
  Patches for this group are printed with those
  for Group 13.
  Their names begin either with GP12 or &
 ************************************************************
  Group 13. Boundary & Special Sources
 
 PATCH(INLET ,WEST , 1, 1, 1, 2, 1, 1, 1, 1)
 COVAL(INLET ,C1 ,1. , SAME )
 COVAL(INLET ,PLNT,1. , GRND )
 
 PATCH(ABSORB ,VOLUME, 1, 11, 1, 2, 1, 1, 1, 1)
 COVAL(ABSORB ,C1 ,0.3 ,0. )
 COVAL(ABSORB ,PLNT, GRND ,0. )
 
 PATCH(SORCE ,VOLUME, 1, 11, 1, 2, 1, 1, 1, 1)
 COVAL(SORCE ,C1 , FIXFLU ,0.1 )
 COVAL(SORCE ,PLNT, FIXFLU , GRND )
 
 PATCH(SPIL ,CELL , 6, 6, 1, 2, 1, 1, 1, 1)
 COVAL(SPIL ,C1 , FIXVAL ,1. )
 COVAL(SPIL ,PLNT, FIXVAL , GRND )
 XCYCLE = F
 EGWF = T
 WALLCO = GRND2
 ************************************************************
  Group 14. Downstream Pressure For PARAB
 ************************************************************
  Group 15. Terminate Sweeps
 LSWEEP = 5 ;ISWC1 = 1
 LITHYD = 1 ;LITFLX = 1 ;LITC = 1 ;ITHC1 = 1
 SELREF = T
 RESFAC =1.0E-04
 ************************************************************
  Group 16. Terminate Iterations
 LITER(C1)=20 ;LITER(PLNT)=20
 ENDIT(C1)=1.0E-03 ;ENDIT(PLNT)=1.0E-03
 ************************************************************
  Group 17. Relaxation
 RELAX(U1,LINRLX,1.)
 RELAX(V1,LINRLX,1.)
 RELAX(C1,FALSDT,1.0E+09)
 RELAX(PLNT,FALSDT,1.0E+09)
 OVRRLX =0.
 EXPERT = F ;NNORSL = F
 ************************************************************
  Group 18. Limits
 VARMAX(U1)=1.0E+06 ;VARMIN(U1)=-1.0E+06
 VARMAX(V1)=1.0E+06 ;VARMIN(V1)=-1.0E+06
 VARMAX(C1)=1.0E+10 ;VARMIN(C1)=-1.0E+10
 VARMAX(PLNT)=1.0E+10 ;VARMIN(PLNT)=-1.0E+10
 ************************************************************
  Group 19. Data transmitted to GROUND
 NAMSAT =MOSG
 PARSOL = F
 ISG62 = 1
 RG( 1) =0.3
 RG( 2) =0.1
 RG( 3) =1.
 ************************************************************
  Group 20. Preliminary Printout
 DISTIL = T ;NULLPR = F
 NDST = 0
 DSTTOL =1.0E-02
 EX(U1)=1. ;EX(V1)=0.
 EX(C1)=0.6088 ;EX(PLNT)=0.6088
 ************************************************************
  Group 21. Print-out of Variables
 INIFLD = F ;SUBWGR = F
    * Y in OUTPUT argument list denotes:
    * 1-field 2-correction-eq. monitor 3-selective dumping      
    * 4-whole-field residual 5-spot-value table 6-residual table
 OUTPUT(U1,Y,N,Y,N,N,N)
 OUTPUT(V1,Y,N,Y,N,N,N)
 OUTPUT(C1,Y,N,Y,Y,Y,Y)
 OUTPUT(PLNT,Y,N,Y,Y,Y,Y)
 ************************************************************
  Group 22. Monitor Print-Out
 IXMON = 1 ;IYMON = 1 ;IZMON = 1
 NPRMON = 100000 ;NPRMNT = 1 ;TSTSWP = -1
 UWATCH = T ;USTEER = T
 HIGHLO = F
 ************************************************************
  Group 23.Field Print-Out & Plot Control
 NPRINT = 100000 ;NUMCLS = 5
 NXPRIN = -1 ;IXPRF = 1 ;IXPRL = 10000
 NYPRIN = -1 ;IYPRF = 1 ;IYPRL = 10000
 IPLTF = 1 ;IPLTL = -1 ;NPLT = -1
 ISWPRF = 1 ;ISWPRL = 100000
 ITABL = 3 ;IPROF = 1
 ABSIZ =0.5 ;ORSIZ =0.4
 NTZPRF = 1 ;NCOLPF = 50
 ICHR = 2 ;NCOLCO = 45 ;NROWCO = 20
   No PATCHes yet used for this Group
 ************************************************************
  Group 24. Dumps For Restarts
 SAVE = T ;NOWIPE = F
 NSAVE =CHAM
STOP