TALK=T;RUN(1,1)
  PHOTON USE
  p




  msg              SOIL DRIFT POLLUTION IN A RIVER
  gr ou x 1
  msg              Velocity vectors for the water
  vec x 1 sh
  msg  Press Enter to continue
  pause
  vec off;red
  set vec comp - v2cr w2cr
  msg           Velocity vectors for the soil particles
  vec x 1 sh
  msg  Press Enter to continue
  pause
  vec off;red
  msg               Slip velocity
  con slip x 1 fil;0.01
  msg  Press Enter to continue
  pause
  con off;red
  msg               Volume fraction of soil particles
  con r2 x 1 fil;0.01
  msg  Press Enter to continue
  pause
  con off;red
  msg               Sedimentation mass transfer rate
  con cmdo x 1 fil;0.01
  msg  Press Enter to continue
  pause
  con off;red
  msg                   Water temperature
  con h1 x 1 fil;0.01
  msg  Press Enter to continue
  pause
  con off;red
  msg                   Soil temperature
  con h2 x 1 fil;0.01
  msg Press e to END
  ENDUSE
  DISPLAY
   This case concerns plane, two-dimensional, two-phase
   soil-water flow with sedimentation through a 180
   degree turnaround duct. The phases have different
   temperatures and PLANT is used to introduce the
   interphase heat transfer rate.
  ENDDIS
  PLANTBEGIN
   * Slip velocity vector
PATCH(SVEL,CELL,1,NX,1,NY,1,NZ,1,LSTEP)
     VAL=SQRT((V1-V2)**2+(W1-W2)**2)
COVAL(SVEL,SLIP,FIXVAL,GRND)
   * Interphase heat transfer
PATCH(INT1,PHASEM,1,NX,1,NY,1,NZ,1,LSTEP)
     CO=0.05*sqrt(SLIP)
     VAL=H2
COVAL(INT1,H1,GRND,GRND)
PATCH(INT2,PHASEM,1,NX,1,NY,1,NZ,1,LSTEP)
    COF=0.05*sqrt(slip)
    VAL=H1
COVAL(INT2,H2,GRND,GRND)
  PLANTEND
 ************************************************************
  Group 1. Run Title and Number
 ************************************************************
 ************************************************************
 
 TEXT(Soil-water flow in a curved channel:126 )
 
 ************************************************************
 ************************************************************
 
 IRUNN = 1 ;LIBREF = 126
 ************************************************************
  Group 2. Time dependence
 STEADY = T
 ************************************************************
  Group 3. X-Direction Grid Spacing
 CARTES = T
 NX = 1
 XULAST =1.
 ************************************************************
  Group 4. Y-Direction Grid Spacing
 NY = 10
 YVLAST =1.
 ************************************************************
  Group 5. Z-Direction Grid Spacing
 PARAB = F
 NZ = 28
 ZWLAST =1.
 ************************************************************
  Group 6. Body-Fitted Coordinates
 BFC = T ;NONORT = T
 NCRT = -1
 RSTGEO = F ;SAVGEO = F
 UUP = F ;VUP = F ;WUP = F
 NGEOM =CHAM
 NAMXYZ =CHAM
 ANGMIN =20.
 DOMAIN(   1,   2,   1,  10,   1,   5)
    * Set fixed sub-domain
 FIXDOM(   1,   0,   0,   0,   0,   0,   0)
 FIXDOM(   2,   0,   0,   0,   0,   0,   0)
 FIXDOM(   3,   0,   0,   0,   0,   0,   0)
 FIXDOM(   4,   0,   0,   0,   0,   0,   0)
 FIXDOM(   5,   0,   0,   0,   0,   0,   0)
 FIXDOM(   6,   0,   0,   0,   0,   0,   0)
 FIXDOM(   7,   0,   0,   0,   0,   0,   0)
 FIXDOM(   8,   0,   0,   0,   0,   0,   0)
 FIXDOM(   9,   0,   0,   0,   0,   0,   0)
 FIXDOM(  10,   0,   0,   0,   0,   0,   0)
 LIJ = F ;LJK = T ;LIK = F
 ************************************************************
  Group 7. Variables: STOREd,SOLVEd,NAMEd
 ONEPHS = F
 EQUVEL = F
 NAME(1)=P1 ;NAME(5)=V1
 NAME(6)=V2 ;NAME(7)=W1
 NAME(8)=W2 ;NAME(9)=R1
 NAME(10)=R2 ;NAME(14)=H1
 NAME(15)=H2 ;NAME(143)=CMDO
 NAME(144)=W2CR ;NAME(145)=V2CR
 NAME(146)=U2CR ;NAME(147)=SLIP
 NAME(148)=WCRT ;NAME(149)=VCRT
 NAME(150)=UCRT
    * Y in SOLUTN argument list denotes:
    * 1-stored 2-solved 3-whole-field
    * 4-point-by-point 5-explicit 6-harmonic averaging 
 SOLUTN(P1,Y,Y,Y,N,N,N)
 SOLUTN(V1,Y,Y,N,N,N,Y)
 SOLUTN(V2,Y,Y,N,N,N,Y)
 SOLUTN(W1,Y,Y,N,N,N,Y)
 SOLUTN(W2,Y,Y,N,N,N,Y)
 SOLUTN(R2,Y,Y,N,N,N,Y)
 SOLUTN(H1,Y,Y,N,N,N,Y)
 SOLUTN(H2,Y,Y,N,N,N,Y)
 SOLUTN(CMDO,Y,N,N,N,N,Y)
 SOLUTN(W2CR,Y,N,N,N,N,N)
 SOLUTN(V2CR,Y,N,N,N,N,N)
 SOLUTN(U2CR,Y,N,N,N,N,N)
 SOLUTN(SLIP,Y,Y,N,N,N,Y)
 SOLUTN(WCRT,Y,N,N,N,N,N)
 SOLUTN(VCRT,Y,N,N,N,N,N)
 SOLUTN(UCRT,Y,N,N,N,N,N)
 ************************************************************
  Group 8. Terms & Devices
    * Y in TERMS argument list denotes:
    * 1-built-in source 2-convection 3-diffusion 4-transient
    * 5-first phase variable 6-interphase transport         
 TERMS(P1,Y,Y,Y,N,Y,Y)
 TERMS(V1,Y,Y,Y,Y,Y,Y)
 TERMS(V2,Y,Y,Y,Y,N,Y)
 TERMS(W1,Y,Y,Y,Y,Y,Y)
 TERMS(W2,Y,Y,Y,Y,N,Y)
 TERMS(R2,Y,Y,Y,Y,N,Y)
 TERMS(H1,N,Y,N,N,Y,N)
 TERMS(H2,N,Y,N,N,N,N)
 TERMS(SLIP,N,N,N,N,N,N)
 DIFCUT =0.5 ;ZDIFAC =1.
 GALA = F ;ADDDIF = F
 EQDVDP = F
 ISOLX = -1 ;ISOLY = -1 ;ISOLZ = -1
 ************************************************************
  Group 9. Properties used if PRPS is not
  stored, and where PRPS = -1.0 if it is!
 RHO1 =1000. ;TMP1 =0.
 EL1 =0.
 TSURR =0. ;TEMP0 =0.
 PRESS0 =0.
 DVO1DT =0. ;DRH1DP =0.
 EMISS =0. ;SCATT =0.
 RADIA =0. ;RADIB =0.
 RHO2 =2000. ;TMP2 =0.
 EL2 =0.
 DVO2DT =0. ;DRH2DP =0.
 ENUL =1.0E-05 ;ENUT =0.
 PHINT(V1)=-2.022E+04 ;PHINT(V2)=-2.022E+04
 PHINT(W1)=-2.022E+04 ;PHINT(W2)=-2.022E+04
 PHINT(R2)=-2.022E+04
 PRNDTL(V1)=1. ;PRNDTL(V2)=1.
 PRNDTL(W1)=1. ;PRNDTL(W2)=1.
 PRNDTL(R2)=1.
 PRT(V1)=1. ;PRT(V2)=1.
 PRT(W1)=1. ;PRT(W2)=1.
 PRT(R2)=1.
 CP1 =1. ;CP2 =1.
 ************************************************************
  Group 10.Inter-Phase Transfer Processes
 CFIPS =0.2
 RLOLIM =0. ;CMDOT = GRND1
 CMDTA =1. ;CMDTB =0.
 CMDTC =0. ;CMDTD =0.
 CINT(P1)=1. ;CINT(V1)=1.
 CINT(V2)=1. ;CINT(W1)=1.
 CINT(W2)=1. ;CINT(R2)=1.
 PHINT(P1)=-2.022E+04 ;PHINT(V1)=-2.022E+04
 PHINT(V2)=-2.022E+04 ;PHINT(W1)=-2.022E+04
 PHINT(W2)=-2.022E+04 ;PHINT(R2)=-2.022E+04
 ************************************************************
  Group 11.Initial field variables (PHIs)
 FIINIT(P1)=1.0E-10 ;FIINIT(V1)=1.0E-10
 FIINIT(V2)=1.0E-10 ;FIINIT(W1)=1.
 FIINIT(W2)=1. ;FIINIT(R1)=0.95
 FIINIT(R2)=0.05 ;FIINIT(H1)=1.0E-10
 FIINIT(H2)=1.0E-10 ;FIINIT(CMDO)=0.
 FIINIT(W2CR)=1.0E-10 ;FIINIT(V2CR)=1.0E-10
 FIINIT(U2CR)=1.0E-10 ;FIINIT(SLIP)=1.0E-10
 FIINIT(WCRT)=1.0E-10 ;FIINIT(VCRT)=1.0E-10
 FIINIT(UCRT)=1.0E-10
   No PATCHes yet used for this Group
 INIADD = F
 FSWEEP = 1
 NAMFI =CHAM
 ************************************************************
  Group 12. Patchwise adjustment of terms
  Patches for this group are printed with those
  for Group 13.
  Their names begin either with GP12 or &
 ************************************************************
  Group 13. Boundary & Special Sources
 
 PATCH(INLET ,LOW , 1, 1, 1, 10, 1, 1, 1, 1)
 COVAL(INLET ,W1 ,0. ,1. )
 COVAL(INLET ,W2 ,0. ,1. )
 COVAL(INLET ,R1 , FIXFLU ,950. )
 COVAL(INLET ,R2 , FIXFLU ,100.000023 )
 COVAL(INLET ,H1 ,0. ,0. )
 COVAL(INLET ,H2 ,0. ,1. )
 
 PATCH(OUTLET ,HIGH , 1, 1, 1, 10, 28, 28, 1, 1)
 COVAL(OUTLET ,V1 ,0. ,0. )
 COVAL(OUTLET ,V2 ,0. ,0. )
 COVAL(OUTLET ,W1 ,0. ,0. )
 COVAL(OUTLET ,W2 ,0. ,0. )
 COVAL(OUTLET ,R1 ,1.0E+06 ,0. )
 COVAL(OUTLET ,R2 ,2.0E+06 ,0. )
 COVAL(OUTLET ,H1 ,0. , SAME )
 COVAL(OUTLET ,H2 ,0. , SAME )
 
 PATCH(SVEL ,CELL , 1, 1, 1, 10, 1, 28, 1, 1)
 COVAL(SVEL ,SLIP, FIXVAL , GRND )
 
 PATCH(INT1 ,PHASEM, 1, 1, 1, 10, 1, 28, 1, 1)
 COVAL(INT1 ,H1 , GRND , GRND )
 
 PATCH(INT2 ,PHASEM, 1, 1, 1, 10, 1, 28, 1, 1)
 COVAL(INT2 ,H2 , GRND , GRND )
 XCYCLE = F
 EGWF = T
 WALLCO = GRND2
 ************************************************************
  Group 14. Downstream Pressure For PARAB
 ************************************************************
  Group 15. Terminate Sweeps
 LSWEEP = 300 ;ISWC1 = 1
 LITHYD = 1 ;LITFLX = 1 ;LITC = 1 ;ITHC1 = 1
 ISWR1 = 1 ;ISWR2 = 10000
 SELREF = T
 RESFAC =1.0E-04
 ************************************************************
  Group 16. Terminate Iterations
 LITER(P1)=10 ;LITER(V1)=10
 LITER(V2)=10 ;LITER(W1)=10
 LITER(W2)=10 ;LITER(R2)=1
 LITER(H1)=20 ;LITER(H2)=20
 LITER(SLIP)=20
 ENDIT(P1)=1.0E-04 ;ENDIT(V1)=1.0E-03
 ENDIT(V2)=1.0E-03 ;ENDIT(W1)=1.0E-03
 ENDIT(W2)=1.0E-03 ;ENDIT(R2)=1.0E-03
 ENDIT(H1)=1.0E-03 ;ENDIT(H2)=1.0E-03
 ENDIT(SLIP)=1.0E-03
 ************************************************************
  Group 17. Relaxation
 RELAX(P1,LINRLX,0.7)
 RELAX(V1,FALSDT,37.5)
 RELAX(V2,FALSDT,37.5)
 RELAX(W1,FALSDT,37.5)
 RELAX(W2,FALSDT,37.5)
 RELAX(R1,LINRLX,0.2)
 RELAX(R2,LINRLX,0.2)
 RELAX(H1,FALSDT,37.5)
 RELAX(H2,FALSDT,37.5)
 RELAX(CMDO,LINRLX,1.)
 RELAX(W2CR,LINRLX,1.)
 RELAX(V2CR,LINRLX,1.)
 RELAX(U2CR,LINRLX,1.)
 RELAX(SLIP,FALSDT,1.0E+09)
 RELAX(WCRT,LINRLX,1.)
 RELAX(VCRT,LINRLX,1.)
 RELAX(UCRT,LINRLX,1.)
 OVRRLX =0.
 EXPERT = F ;NNORSL = F
 ************************************************************
  Group 18. Limits
 VARMAX(P1)=1.0E+10 ;VARMIN(P1)=-1.0E+10
 VARMAX(V1)=1.0E+06 ;VARMIN(V1)=-1.0E+06
 VARMAX(V2)=1.0E+06 ;VARMIN(V2)=-1.0E+06
 VARMAX(W1)=1.0E+06 ;VARMIN(W1)=-1.0E+06
 VARMAX(W2)=1.0E+06 ;VARMIN(W2)=-1.0E+06
 VARMAX(R1)=1. ;VARMIN(R1)=1.0E-10
 VARMAX(R2)=1. ;VARMIN(R2)=1.0E-10
 VARMAX(H1)=1. ;VARMIN(H1)=1.0E-10
 VARMAX(H2)=1. ;VARMIN(H2)=1.0E-10
 VARMAX(CMDO)=1.0E+10 ;VARMIN(CMDO)=-1.0E+10
 VARMAX(W2CR)=1.0E+10 ;VARMIN(W2CR)=-1.0E+10
 VARMAX(V2CR)=1.0E+10 ;VARMIN(V2CR)=-1.0E+10
 VARMAX(U2CR)=1.0E+10 ;VARMIN(U2CR)=-1.0E+10
 VARMAX(SLIP)=1.0E+10 ;VARMIN(SLIP)=-1.0E+10
 VARMAX(WCRT)=1.0E+10 ;VARMIN(WCRT)=-1.0E+10
 VARMAX(VCRT)=1.0E+10 ;VARMIN(VCRT)=-1.0E+10
 VARMAX(UCRT)=1.0E+10 ;VARMIN(UCRT)=-1.0E+10
 ************************************************************
  Group 19. Data transmitted to GROUND
 NAMSAT =MOSG
 PARSOL = F
 ISG62 = 1
 ************************************************************
  Group 20. Preliminary Printout
 DISTIL = T ;NULLPR = F
 NDST = 0
 DSTTOL =1.0E-02
 EX(P1)=136.100006 ;EX(V1)=0.02559
 EX(V2)=0.248 ;EX(W1)=1.022
 EX(W2)=1.044 ;EX(R1)=0.9717
 EX(R2)=0.02828 ;EX(H1)=0.3536
 EX(H2)=0.6799 ;EX(CMDO)=8.34
 EX(W2CR)=0.8668 ;EX(V2CR)=0.4656
 EX(U2CR)=0. ;EX(SLIP)=0.2195
 EX(WCRT)=0.8614 ;EX(VCRT)=0.303
 EX(UCRT)=0.
 ************************************************************
  Group 21. Print-out of Variables
 INIFLD = F ;SUBWGR = F
    * Y in OUTPUT argument list denotes:
    * 1-field 2-correction-eq. monitor 3-selective dumping      
    * 4-whole-field residual 5-spot-value table 6-residual table
 OUTPUT(P1,Y,N,Y,Y,Y,Y)
 OUTPUT(V1,Y,N,Y,Y,Y,Y)
 OUTPUT(V2,Y,N,Y,Y,Y,Y)
 OUTPUT(W1,Y,N,Y,Y,Y,Y)
 OUTPUT(W2,Y,N,Y,Y,Y,Y)
 OUTPUT(R1,Y,N,Y,N,N,N)
 OUTPUT(R2,Y,N,Y,Y,Y,Y)
 OUTPUT(H1,Y,N,Y,Y,Y,Y)
 OUTPUT(H2,Y,N,Y,Y,Y,Y)
 OUTPUT(CMDO,Y,N,Y,N,N,N)
 OUTPUT(W2CR,Y,N,Y,N,N,N)
 OUTPUT(V2CR,Y,N,Y,N,N,N)
 OUTPUT(U2CR,Y,N,Y,N,N,N)
 OUTPUT(SLIP,Y,N,N,N,N,N)
 OUTPUT(WCRT,Y,N,Y,N,N,N)
 OUTPUT(VCRT,Y,N,Y,N,N,N)
 OUTPUT(UCRT,Y,N,Y,N,N,N)
 ************************************************************
  Group 22. Monitor Print-Out
 IXMON = 1 ;IYMON = 5 ;IZMON = 10
 NPRMON = 300 ;NPRMNT = 1 ;TSTSWP = -1
 UWATCH = T ;USTEER = T
 HIGHLO = F
 ************************************************************
  Group 23.Field Print-Out & Plot Control
 NPRINT = 100000 ;NUMCLS = 5
 NYPRIN = -1 ;IYPRF = 1 ;IYPRL = 10000
 NZPRIN = -1 ;IZPRF = 1 ;IZPRL = 10000
 XZPR = F ;YZPR = F
 IPLTF = 1 ;IPLTL = -1 ;NPLT = -1
 ISWPRF = 1 ;ISWPRL = 100000
 ITABL = 3 ;IPROF = 1
 ABSIZ =0.5 ;ORSIZ =0.4
 NTZPRF = 1 ;NCOLPF = 50
 ICHR = 2 ;NCOLCO = 45 ;NROWCO = 20
   No PATCHes yet used for this Group
 ************************************************************
  Group 24. Dumps For Restarts
 SAVE = T ;NOWIPE = F
 NSAVE =CHAM
STOP