TALK=T;RUN(1,1)
     PHOTON USE
     p



     gr ou z 1
     vec z 1 sh
     msg Velocity and displacement vectors
     pause
     vec cl;red
     con u1 z 1 fil;.001
     msg X-component displacement contours.
     pause
     con cl;red
     con v1 z 1 fil;.001
     msg Y-component displacement contours
     pause
     con cl;red
     con p1 z 1 fil;.001
     msg Dilatation contours
     pause
     msg Press E to end
     enduse
     PLANTBEGIN
   IF(.NOT.ISOTHER) THEN
PATCH(TEMP,CELL,1,NX,1,NY,1,1,1,1)
     VAL=XG2D+YG2D
COVAL(TEMP,TEM,FIXVAL,GRND)
   ENDIF
    ** Fixed analitical pressure field
PATCH(FIXP,CELL,1,NX,1,NY,1,1,1,1)
     VAL=2.*(XG2D+YG2D)
COVAL(FIXP,P1,FIXVAL,GRND)
              Stress - in -Solid BC
    ---------------- WEST ----------------------------
   ** Zero displacement at the WEST
PATCH(WESTZD,WWALL,1,1,1,NY,1,1,1,1)
COVAL(WESTZD,U1,1.,0.0)
    ---------------- EAST ----------------------------
   ** Zero normal stress at the EAST
PATCH(EASZN,CELL,NX-1,NX-1,1,NY,1,1,1,1)
    VAL=U1[-1,,]            +0.333*(P1+4.*(:ALFA:*TEM-1.5*Y$
G2D))*DXU2D
COVAL(EASZN,U1,FIXVAL,GRND)
   ** Zero shear stress at the EAST
PATCH(EASZS,EAST,NX,NX,1,NY-1,1,1,1,1)
    VAL=-(U1[-1,+1,]-U1[-1,,])/DYG2D
COVAL(EASZS,V1,FIXFLU,GRND)
   ** Fixed dilatation at the EAST
PATCH(FXDEAS,EAST,nx-2,NX,2,NY,1,1,1,1)
    VAL=2.*(:ALFA:*TEM+1.5*YG2D)                -1.5*(V1-V1$
[,-1,])/DYV2D
   COVAL(FXDEAS,P1,FIXVAL, grnd)

PATCH(FXDEAC,EAST,nx-2,NX,1,1,1,1,1,1)
    VAL=2.*(:ALFA:*TEM+1.5*YG2D)                -1.5*(V1[,+$
1,]-V1)/DYV2D[,+1,]
   COVAL(FXDEAC,P1,FIXVAL, grnd)
    ---------------- SOUTH ----------------------------
   ** Zero displacement at the south base
PATCH(SOUZD,SWALL,1,NX,1,1,1,1,1,1)
COVAL(SOUZD,V1,1.,0.0)
    ---------------- NORTH ----------------------------
   ** Zero normal stress at the free north boundary
PATCH(NORZN,CELL,1,NX,NY-1,NY-1,1,1,1,1)
    VAL=V1[,-1,]            +0.333*(P1+4.*(:ALFA:*TEM-1.5*X$
G2D))*DYV2D
COVAL(NORZN,V1,FIXVAL,grnd)
   ** Zero shear stress at the free north boundary
PATCH(NORZS,NORTH,1,NX-1,NY,NY,1,1,1,1)
    VAL=-(V1[+1,-1,]-V1[,-1,])/DXG2D
COVAL(NORZS,U1,FIXFLU,GRND)
   ** Fixed dilatation at the free north boundary
PATCH(FDNW,NORTH,1,1,ny-2,NY,1,1,1,1)
    VAL=2.*(:ALFA:*TEM+1.5*XG2D)                -1.5*(U1[+1$
,,]-U1)/DXU2D[+1,,]
   COVAL(FDNW,P1,FIXVAL, grnd)
PATCH(FDNOR,NORTH,2,NX-1,ny-2,NY,1,1,1,1)
    VAL=2.*(:ALFA:*TEM+1.5*XG2D)                -1.5*(U1-U1$
[-1,,])/DXU2D
   COVAL(FDNOR,P1,FIXVAL, grnd)
PATCH(FDNEC,NORTH,NX,NX,ny-2,NY,1,1,1,1)
    VAL=2.*(:ALFA:*TEM+1.5*XG2D)                -1.5*(U1[-1$
,,]-U1[-2,,])/DXU2D[-1,,]
COVAL(FDNEC,P1,FIXVAL, grnd)

   ** Volumetric mass source for dilatation
PATCH(DILAT,VOLUME,1,nx,1,ny,1,1,1,1)
    VAL=-P1/3.+8./3.*:ALFA:*TEM
COVAL(DILAT,P1,FIXFLU,GRND)
   PLANTEND
 ************************************************************
  Group 1. Run Title and Number
 ************************************************************
 ************************************************************
 
 TEXT(2D Stress in solid, XY plane            )
 
 ************************************************************
 ************************************************************
 
 IRUNN = 1 ;LIBREF = 450
 ************************************************************
  Group 2. Time dependence
 STEADY = T
 ************************************************************
  Group 3. X-Direction Grid Spacing
 CARTES = T
 NX = 10
 XULAST =1.
 XFRAC(1)=0.1 ;XFRAC(2)=0.2
 XFRAC(3)=0.3 ;XFRAC(4)=0.4
 XFRAC(5)=0.5 ;XFRAC(6)=0.6
 XFRAC(7)=0.7 ;XFRAC(8)=0.8
 XFRAC(9)=0.9 ;XFRAC(10)=1.
 ************************************************************
  Group 4. Y-Direction Grid Spacing
 NY = 10
 YVLAST =1.
 YFRAC(1)=0.1 ;YFRAC(2)=0.2
 YFRAC(3)=0.3 ;YFRAC(4)=0.4
 YFRAC(5)=0.5 ;YFRAC(6)=0.6
 YFRAC(7)=0.7 ;YFRAC(8)=0.8
 YFRAC(9)=0.9 ;YFRAC(10)=1.
 ************************************************************
  Group 5. Z-Direction Grid Spacing
 PARAB = F
 NZ = 1
 ZWLAST =1.
 ZFRAC(1)=1.
 ************************************************************
  Group 6. Body-Fitted Coordinates
 ************************************************************
  Group 7. Variables: STOREd,SOLVEd,NAMEd
 ONEPHS = T
 NAME(1)=P1 ;NAME(3)=U1
 NAME(5)=V1 ;NAME(150)=TEM
    * Y in SOLUTN argument list denotes:
    * 1-stored 2-solved 3-whole-field
    * 4-point-by-point 5-explicit 6-harmonic averaging 
 SOLUTN(P1,Y,Y,N,N,N,Y)
 SOLUTN(U1,Y,Y,N,N,N,Y)
 SOLUTN(V1,Y,Y,N,N,N,Y)
 SOLUTN(TEM,Y,Y,N,N,N,Y)
 ************************************************************
  Group 8. Terms & Devices
    * Y in TERMS argument list denotes:
    * 1-built-in source 2-convection 3-diffusion 4-transient
    * 5-first phase variable 6-interphase transport         
 TERMS(P1,Y,Y,Y,N,Y,Y)
 TERMS(U1,Y,N,Y,Y,Y,Y)
 TERMS(V1,Y,N,Y,Y,Y,Y)
 TERMS(TEM,N,N,Y,Y,Y,Y)
 DIFCUT =0.5 ;ZDIFAC =1.
 GALA = F ;ADDDIF = F
 ISOLX = -1 ;ISOLY = -1 ;ISOLZ = -1
 ************************************************************
  Group 9. Properties used if PRPS is not
  stored, and where PRPS = -1.0 if it is!
 RHO1 =1. ;TMP1 =0.
 EL1 =0.
 TSURR =0. ;TEMP0 =0.
 PRESS0 =0.
 DVO1DT =0. ;DRH1DP =0.
 EMISS =0. ;SCATT =0.
 RADIA =0. ;RADIB =0.
 ENUL =1. ;ENUT =0.
 PRNDTL(U1)=1. ;PRNDTL(V1)=1.
 PRNDTL(TEM)=1.
 PRT(U1)=1. ;PRT(V1)=1.
 PRT(TEM)=1.
 CP1 =1. ;CP2 =1.
 ************************************************************
  Group 10.Inter-Phase Transfer Processes
 ************************************************************
  Group 11.Initial field variables (PHIs)
 FIINIT(P1)=1.0E-10 ;FIINIT(U1)=1.0E-10
 FIINIT(V1)=1.0E-10 ;FIINIT(TEM)=1.
   No PATCHes yet used for this Group
 INIADD = F
 FSWEEP = 1
 NAMFI =CHAM
 ************************************************************
  Group 12. Patchwise adjustment of terms
  Patches for this group are printed with those
  for Group 13.
  Their names begin either with GP12 or &
 ************************************************************
  Group 13. Boundary & Special Sources
 
 PATCH(TEMP ,CELL , 1, 10, 1, 10, 1, 1, 1, 1)
 COVAL(TEMP ,TEM , FIXVAL , GRND )
 
 PATCH(FIXP ,CELL , 1, 10, 1, 10, 1, 1, 1, 1)
 COVAL(FIXP ,P1 , FIXVAL , GRND )
 
 PATCH(WESTZD ,WWALL , 1, 1, 1, 10, 1, 1, 1, 1)
 COVAL(WESTZD ,U1 ,1. ,0. )
 
 PATCH(EASZN ,CELL , 9, 9, 1, 10, 1, 1, 1, 1)
 COVAL(EASZN ,U1 , FIXVAL , GRND )
 
 PATCH(EASZS ,EAST , 10, 10, 1, 9, 1, 1, 1, 1)
 COVAL(EASZS ,V1 , FIXFLU , GRND )
 
 PATCH(FXDEAS ,EAST , 8, 10, 2, 10, 1, 1, 1, 1)
 
 PATCH(FXDEAC ,EAST , 8, 10, 1, 1, 1, 1, 1, 1)
 
 PATCH(SOUZD ,SWALL , 1, 10, 1, 1, 1, 1, 1, 1)
 COVAL(SOUZD ,V1 ,1. ,0. )
 
 PATCH(NORZN ,CELL , 1, 10, 9, 9, 1, 1, 1, 1)
 COVAL(NORZN ,V1 , FIXVAL , GRND )
 
 PATCH(NORZS ,NORTH , 1, 9, 10, 10, 1, 1, 1, 1)
 COVAL(NORZS ,U1 , FIXFLU , GRND )
 
 PATCH(FDNW ,NORTH , 1, 1, 8, 10, 1, 1, 1, 1)
 
 PATCH(FDNOR ,NORTH , 2, 9, 8, 10, 1, 1, 1, 1)
 
 PATCH(FDNEC ,NORTH , 10, 10, 8, 10, 1, 1, 1, 1)
 COVAL(FDNEC ,P1 , FIXVAL , GRND )
 
 PATCH(DILAT ,VOLUME, 1, 10, 1, 10, 1, 1, 1, 1)
 COVAL(DILAT ,P1 , FIXFLU , GRND )
 XCYCLE = F
 EGWF = T
 WALLCO = GRND2
 ************************************************************
  Group 14. Downstream Pressure For PARAB
 ************************************************************
  Group 15. Terminate Sweeps
 LSWEEP = 150 ;ISWC1 = 1
 LITHYD = 1 ;LITFLX = 1 ;LITC = 1 ;ITHC1 = 1
 SELREF = T
 RESFAC =1.0E-04
 ************************************************************
  Group 16. Terminate Iterations
 LITER(P1)=20 ;LITER(U1)=10
 LITER(V1)=10 ;LITER(TEM)=20
 ENDIT(P1)=1.0E-03 ;ENDIT(U1)=1.0E-03
 ENDIT(V1)=1.0E-03 ;ENDIT(TEM)=1.0E-03
 ************************************************************
  Group 17. Relaxation
 RELAX(P1,LINRLX,1.)
 RELAX(U1,FALSDT,1.)
 RELAX(V1,FALSDT,1.)
 RELAX(TEM,FALSDT,1.0E+09)
 OVRRLX =0.
 EXPERT = F ;NNORSL = F
 ************************************************************
  Group 18. Limits
 VARMAX(P1)=1.0E+10 ;VARMIN(P1)=-1.0E+10
 VARMAX(U1)=1.0E+06 ;VARMIN(U1)=-1.0E+06
 VARMAX(V1)=1.0E+06 ;VARMIN(V1)=-1.0E+06
 VARMAX(TEM)=1.0E+10 ;VARMIN(TEM)=-1.0E+10
 ************************************************************
  Group 19. Data transmitted to GROUND
 NAMSAT =MOSG
 PARSOL = F
 ISG62 = 1
 ************************************************************
  Group 20. Preliminary Printout
 DISTIL = T ;NULLPR = F
 NDST = 0
 DSTTOL =1.0E-02
 EX(P1)=2.001 ;EX(U1)=0.3164
 EX(V1)=0.3146 ;EX(TEM)=1.
 ************************************************************
  Group 21. Print-out of Variables
 INIFLD = F ;SUBWGR = F
    * Y in OUTPUT argument list denotes:
    * 1-field 2-correction-eq. monitor 3-selective dumping      
    * 4-whole-field residual 5-spot-value table 6-residual table
 OUTPUT(P1,Y,N,Y,Y,Y,Y)
 OUTPUT(U1,Y,N,Y,Y,Y,Y)
 OUTPUT(V1,Y,N,Y,Y,Y,Y)
 OUTPUT(TEM,Y,N,Y,Y,Y,Y)
 ************************************************************
  Group 22. Monitor Print-Out
 IXMON = 1 ;IYMON = 10 ;IZMON = 1
 NPRMON = 100000 ;NPRMNT = 1 ;TSTSWP = -1
 UWATCH = T ;USTEER = T
 HIGHLO = F
 ************************************************************
  Group 23.Field Print-Out & Plot Control
 NPRINT = 100000 ;NUMCLS = 5
 NXPRIN = 1 ;IXPRF = 1 ;IXPRL = 10000
 NYPRIN = 1 ;IYPRF = 1 ;IYPRL = 10000
 IPLTF = 1 ;IPLTL = -1 ;NPLT = -1
 ISWPRF = 1 ;ISWPRL = 100000
 ITABL = 3 ;IPROF = 1
 ABSIZ =0.5 ;ORSIZ =0.4
 NTZPRF = 1 ;NCOLPF = 50
 ICHR = 2 ;NCOLCO = 45 ;NROWCO = 20
   No PATCHes yet used for this Group
 ************************************************************
  Group 24. Dumps For Restarts
 SAVE = T ;NOWIPE = F
 NSAVE =CHAM
STOP