```
TALK=T;RUN(1,1)
************************************************************
Group 1. Run Title and Number
************************************************************
************************************************************

TEXT(No title has been set for this run.     )

************************************************************
************************************************************

IRUNN = 1 ;LIBREF = 0
************************************************************
Group 2. Time dependence
************************************************************
Group 3. X-Direction Grid Spacing
CARTES = T
NX = 1
XULAST =2.9
XFRAC(1)=1.
************************************************************
Group 4. Y-Direction Grid Spacing
NY = 5
YVLAST =10.
YFRAC(1)=0.2 ;YFRAC(2)=0.4
YFRAC(3)=0.6 ;YFRAC(4)=0.8
YFRAC(5)=1.
************************************************************
Group 5. Z-Direction Grid Spacing
PARAB = F
NZ = 5
ZWLAST =10.
ZFRAC(1)=0.2 ;ZFRAC(2)=0.4
ZFRAC(3)=0.6 ;ZFRAC(4)=0.8
ZFRAC(5)=1.
************************************************************
Group 6. Body-Fitted Coordinates
************************************************************
Group 7. Variables: STOREd,SOLVEd,NAMEd
ONEPHS = T
NAME(1)=P1 ;NAME(5)=V1
NAME(7)=W1 ;NAME(137)=QRZ
NAME(138)=QRY ;NAME(141)=WDIS
NAME(142)=SCAT ;NAME(143)=EMIS
NAME(144)=WGAP ;NAME(145)=T3
NAME(146)=TEM1 ;NAME(148)=DEN1
NAME(149)=PRPS ;NAME(150)=LTLS
* Y in SOLUTN argument list denotes:
* 1-stored 2-solved 3-whole-field
* 4-point-by-point 5-explicit 6-harmonic averaging
SOLUTN(P1,Y,Y,Y,N,N,Y)
SOLUTN(V1,Y,Y,N,N,N,Y)
SOLUTN(W1,Y,Y,N,N,N,Y)
SOLUTN(QRZ,Y,N,N,N,N,Y)
SOLUTN(QRY,Y,N,N,N,N,Y)
SOLUTN(WDIS,Y,N,N,N,N,Y)
SOLUTN(SCAT,Y,N,N,N,N,Y)
SOLUTN(EMIS,Y,N,N,N,N,Y)
SOLUTN(WGAP,Y,N,N,N,N,Y)
SOLUTN(T3,Y,Y,N,N,N,Y)
SOLUTN(TEM1,Y,Y,Y,N,N,Y)
SOLUTN(DEN1,Y,N,N,N,N,Y)
SOLUTN(PRPS,Y,N,N,N,N,Y)
SOLUTN(LTLS,Y,Y,Y,N,N,Y)
DEN1 = 148
PRPS = 149
************************************************************
Group 8. Terms & Devices
* Y in TERMS argument list denotes:
* 1-built-in source 2-convection 3-diffusion 4-transient
* 5-first phase variable 6-interphase transport
TERMS(P1,Y,Y,Y,N,Y,Y)
TERMS(V1,Y,Y,Y,Y,Y,Y)
TERMS(W1,Y,Y,Y,Y,Y,Y)
TERMS(T3,N,N,Y,N,Y,N)
TERMS(TEM1,Y,Y,Y,Y,Y,Y)
TERMS(LTLS,N,N,Y,N,Y,Y)
DIFCUT =0.5 ;ZDIFAC =1.
GALA = F ;ADDDIF = F
NEWRH1 = T
NEWENL = T
ISOLX = -1 ;ISOLY = -1 ;ISOLZ = -1
************************************************************
Group 9. Properties used if PRPS is not
stored, and where PRPS = -1.0 if it is!
RHO1 = GRND5 ;TMP1 =0.
EL1 =0.
TSURR =0. ;TEMP0 =273.
PRESS0 =1.0E+05
DVO1DT =3.33E-03 ;DRH1DP = GRND5
RHO1A =0. ;RHO1B =3.4843E-03
RHO1C =0.71429
EMISS =0. ;SCATT =0.
ENUL = GRND2 ;ENUT =0.
ENULA =-4.94679E-06 ;ENULB =4.58394E-08
ENULC =8.0974E-11
PRNDTL(V1)=1. ;PRNDTL(W1)=1.
PRNDTL(T3)=-0.0263 ;PRNDTL(TEM1)=-0.0263
PRNDTL(LTLS)=1.
PRT(V1)=1. ;PRT(W1)=1.
PRT(T3)=1. ;PRT(TEM1)=1.
PRT(LTLS)=1.
CP1 =1004. ;CP2 =1.
************************************************************
Group 10.Inter-Phase Transfer Processes
************************************************************
Group 11.Initial field variables (PHIs)
FIINIT(P1)=1.0E-10 ;FIINIT(V1)=1.0E-10
FIINIT(W1)=1.0E-10 ;FIINIT(QRZ)=1.0E-10
FIINIT(QRY)=1.0E-10 ;FIINIT(WDIS)=0.29
FIINIT(SCAT)=0. ;FIINIT(EMIS)=0.
FIINIT(WGAP)=1.0E-10 ;FIINIT(T3)=1.0E-10
FIINIT(TEM1)=0. ;FIINIT(DEN1)=1.0E-10
FIINIT(PRPS)=-1. ;FIINIT(LTLS)=1.0E-10

PATCH(^OB1 ,INIVAL, 1, 0, 0, 0, 0, 0, 1, 1)
INIT(^OB1 ,EMIS,0. ,1. )
INIT(^OB1 ,PRPS,0. ,100. )
FSWEEP = 1
NAMFI =CHAM
************************************************************
Group 12. Patchwise adjustment of terms
Patches for this group are printed with those
for Group 13.
Their names begin either with GP12 or &
************************************************************
Group 13. Boundary & Special Sources

PATCH(OB2 ,LOW , 1, 1, 1, 5, 1, 1, 1, 1)
COVAL(OB2 ,P1 , FIXFLU ,1.2763 )
COVAL(OB2 ,V1 ,0. ,0. )
COVAL(OB2 ,W1 ,0. ,1. )
COVAL(OB2 ,TEM1,0. ,0. )

PATCH(OB3 ,HIGH , 1, 1, 1, 5, 5, 5, 1, 1)
COVAL(OB3 ,P1 ,1. ,0. )
COVAL(OB3 ,V1 ,0. ,0. )
COVAL(OB3 ,W1 ,0. ,0. )
COVAL(OB3 ,TEM1,0. ,0. )
XCYCLE = F
EGWF = T
WALLCO = GRND2
************************************************************
Group 14. Downstream Pressure For PARAB
************************************************************
Group 15. Terminate Sweeps
LSWEEP = 50 ;ISWC1 = 1
LITHYD = 1 ;LITFLX = 1 ;LITC = 1 ;ITHC1 = 1
SELREF = T
RESFAC =1.0E-03
************************************************************
Group 16. Terminate Iterations
LITER(P1)=200 ;LITER(V1)=10
LITER(W1)=10 ;LITER(T3)=200
LITER(TEM1)=200 ;LITER(LTLS)=20
ENDIT(P1)=1.0E-03 ;ENDIT(V1)=1.0E-03
ENDIT(W1)=1.0E-03 ;ENDIT(T3)=1.0E-06
ENDIT(TEM1)=1.0E-06 ;ENDIT(LTLS)=1.0E-03
************************************************************
Group 17. Relaxation
RELAX(P1,LINRLX,1.)
RELAX(V1,FALSDT,1.)
RELAX(W1,FALSDT,1.)
RELAX(QRZ,LINRLX,1.)
RELAX(QRY,LINRLX,1.)
RELAX(WDIS,LINRLX,1.)
RELAX(SCAT,LINRLX,1.)
RELAX(EMIS,LINRLX,1.)
RELAX(WGAP,LINRLX,1.)
RELAX(T3,LINRLX,0.8)
RELAX(TEM1,LINRLX,0.8)
RELAX(DEN1,LINRLX,1.)
RELAX(PRPS,LINRLX,1.)
RELAX(LTLS,LINRLX,1.)
OVRRLX =0.
EXPERT = F ;NNORSL = F
************************************************************
Group 18. Limits
VARMAX(P1)=1.0E+10 ;VARMIN(P1)=-7.5E+04
VARMAX(V1)=1.0E+06 ;VARMIN(V1)=-1.0E+06
VARMAX(W1)=1.0E+06 ;VARMIN(W1)=-1.0E+06
VARMAX(QRZ)=1.0E+10 ;VARMIN(QRZ)=-1.0E+10
VARMAX(QRY)=1.0E+10 ;VARMIN(QRY)=-1.0E+10
VARMAX(WDIS)=1.0E+10 ;VARMIN(WDIS)=-1.0E+10
VARMAX(SCAT)=1.0E+10 ;VARMIN(SCAT)=-1.0E+10
VARMAX(EMIS)=1.0E+10 ;VARMIN(EMIS)=-1.0E+10
VARMAX(WGAP)=1.0E+10 ;VARMIN(WGAP)=-1.0E+10
VARMAX(T3)=3000. ;VARMIN(T3)=-30.
VARMAX(TEM1)=3000. ;VARMIN(TEM1)=-204.75
VARMAX(DEN1)=1.0E+10 ;VARMIN(DEN1)=-1.0E+10
VARMAX(PRPS)=1.0E+10 ;VARMIN(PRPS)=-1.0E+10
VARMAX(LTLS)=1.0E+10 ;VARMIN(LTLS)=-1.0E+10
************************************************************
Group 19. Data transmitted to GROUND
NAMGRD =FLAR
CONWIZ = T
ISG62 = 1
SPEDAT(SET,DOMAIN,PHASE_1_MAT,I,2)
SPEDAT(SET,MAXINC,KE,R,100.)
SPEDAT(SET,OBJNAM,^OB1,C,B2)
SPEDAT(SET,OBJTYP,^OB1,C,BLOCKAGE)
SPEDAT(SET,B2,MATERIAL,R,100.)
SPEDAT(SET,OBJNAM,!OB2,C,B3)
SPEDAT(SET,OBJTYP,!OB2,C,INLET)
SPEDAT(SET,OBJNAM,!OB3,C,B4)
SPEDAT(SET,OBJTYP,!OB3,C,OPENING)
SPEDAT(SET,ARATIO,!OB3,R,1.)
SPEDAT(SET,FACETDAT,NUMOBJ,I,3)
SPEDAT(SET,MATERIAL,100,L,T)
************************************************************
Group 20. Preliminary Printout
DISTIL = T ;NULLPR = F
NDST = 0
DSTTOL =1.0E-02
EX(P1)=2.479 ;EX(V1)=0.248
EX(W1)=1.061 ;EX(QRZ)=1.914E-03
EX(QRY)=1.359E-03 ;EX(WDIS)=3.763
EX(SCAT)=0. ;EX(EMIS)=0.08
EX(WGAP)=15.63 ;EX(T3)=5.673E-04
EX(TEM1)=5.8E-04 ;EX(DEN1)=217.199997
EX(PRPS)=8.92 ;EX(LTLS)=21.26
************************************************************
Group 21. Print-out of Variables
INIFLD = F ;SUBWGR = F
* Y in OUTPUT argument list denotes:
* 1-field 2-correction-eq. monitor 3-selective dumping
* 4-whole-field residual 5-spot-value table 6-residual table
OUTPUT(P1,Y,N,Y,Y,Y,Y)
OUTPUT(V1,Y,N,Y,Y,Y,Y)
OUTPUT(W1,Y,N,Y,Y,Y,Y)
OUTPUT(QRZ,Y,N,Y,N,N,N)
OUTPUT(QRY,Y,N,Y,N,N,N)
OUTPUT(WDIS,Y,N,Y,N,N,N)
OUTPUT(SCAT,Y,N,Y,N,N,N)
OUTPUT(EMIS,Y,N,Y,N,N,N)
OUTPUT(WGAP,Y,N,Y,N,N,N)
OUTPUT(T3,Y,N,Y,Y,Y,Y)
OUTPUT(TEM1,Y,N,Y,Y,Y,Y)
OUTPUT(DEN1,Y,N,Y,N,N,N)
OUTPUT(PRPS,Y,N,Y,N,N,N)
OUTPUT(LTLS,Y,N,Y,Y,Y,Y)
************************************************************
Group 22. Monitor Print-Out
IXMON = 1 ;IYMON = 3 ;IZMON = 3
NPRMON = 100000 ;NPRMNT = 1 ;TSTSWP = -1
UWATCH = T ;USTEER = T
HIGHLO = F
************************************************************
Group 23.Field Print-Out & Plot Control
NPRINT = 100000 ;NUMCLS = 5
NYPRIN = -1 ;IYPRF = 1 ;IYPRL = 10000
NZPRIN = -1 ;IZPRF = 1 ;IZPRL = 10000
XZPR = F ;YZPR = F
IPLTF = 1 ;IPLTL = -1 ;NPLT = -1
ISWPRF = 1 ;ISWPRL = 100000
ITABL = 3 ;IPROF = 1
ABSIZ =0.5 ;ORSIZ =0.4
NTZPRF = 1 ;NCOLPF = 50
ICHR = 2 ;NCOLCO = 45 ;NROWCO = 20
No PATCHes yet used for this Group
************************************************************
Group 24. Dumps For Restarts
SAVE = T ;NOWIPE = F
NSAVE =CHAM
IDISPA = 10 ;IDISPB = 0 ;IDISPC = 0
CSG1    ='SW'
STOP
```