TALK=T;RUN(1,1) DISPLAY A cubical block is subjected to x-direction tension, under three possible lateral-constraint conditions: 1. no constraint 2. lateral displacement in y and z directions prevented 3. lateral displacement prevented only in y direction Because the x-direction displacements depend only on x, NY and NZ, the number of x- and z-direction intervals, are both set to 1. The boolean variable 'direct' toggles which end is fixed and which is pulled. The stresses and strains are calculated; and their textbook values also. the former divided by the latter are printed as: SX/T, EX/T, etc, the values of which should be close to 1.0 (but they will be printed as 0.0 if the theoretical value is 0.0) ENDDIS ************************************************************ Group 1. Run Title and Number ************************************************************ ************************************************************ TEXT(Cube in X-direction tension; S101 ) ************************************************************ ************************************************************ IRUNN = 1 ;LIBREF = 0 ************************************************************ Group 2. Time dependence STEADY = T ************************************************************ Group 3. X-Direction Grid Spacing CARTES = T NX = 10 XULAST =10. XFRAC(1)=0.794328 ;XFRAC(2)=0.85134 XFRAC(3)=0.886568 ;XFRAC(4)=0.912444 XFRAC(5)=0.933033 ;XFRAC(6)=0.9502 XFRAC(7)=0.964961 ;XFRAC(8)=0.977933 XFRAC(9)=0.989519 ;XFRAC(10)=1. ************************************************************ Group 4. Y-Direction Grid Spacing NY = 1 YVLAST =1. YFRAC(1)=1. ************************************************************ Group 5. Z-Direction Grid Spacing PARAB = F NZ = 1 ZWLAST =1. ZFRAC(1)=1. ************************************************************ Group 6. Body-Fitted Coordinates ************************************************************ Group 7. Variables: STOREd,SOLVEd,NAMEd ONEPHS = T NAME(1)=P1 ;NAME(3)=U1 NAME(127)=EZ/T ;NAME(128)=EY/T NAME(129)=EX/T ;NAME(130)=SZ/T NAME(131)=SY/T ;NAME(132)=SX/T NAME(133)=EZTH ;NAME(134)=EPSZ NAME(135)=EYTH ;NAME(136)=EPSY NAME(137)=EXTH ;NAME(138)=EPSX NAME(139)=SZTH ;NAME(140)=STRZ NAME(141)=SYTH ;NAME(142)=STRY NAME(143)=SXTH ;NAME(144)=STRX NAME(145)=P1TH ;NAME(146)=DRH1 NAME(147)=DVO1 ;NAME(148)=ENUL NAME(149)=DEN1 ;NAME(150)=PRPS * Y in SOLUTN argument list denotes: * 1-stored 2-solved 3-whole-field * 4-point-by-point 5-explicit 6-harmonic averaging SOLUTN(P1,Y,Y,N,N,N,Y) SOLUTN(U1,Y,Y,N,N,N,Y) SOLUTN(EZ/T,Y,N,N,N,N,N) SOLUTN(EY/T,Y,N,N,N,N,N) SOLUTN(EX/T,Y,N,N,N,N,N) SOLUTN(SZ/T,Y,N,N,N,N,N) SOLUTN(SY/T,Y,N,N,N,N,N) SOLUTN(SX/T,Y,N,N,N,N,N) SOLUTN(EZTH,Y,N,N,N,N,Y) SOLUTN(EPSZ,Y,N,N,N,N,Y) SOLUTN(EYTH,Y,N,N,N,N,Y) SOLUTN(EPSY,Y,N,N,N,N,Y) SOLUTN(EXTH,Y,N,N,N,N,Y) SOLUTN(EPSX,Y,N,N,N,N,Y) SOLUTN(SZTH,Y,N,N,N,N,Y) SOLUTN(STRZ,Y,N,N,N,N,Y) SOLUTN(SYTH,Y,N,N,N,N,Y) SOLUTN(STRY,Y,N,N,N,N,Y) SOLUTN(SXTH,Y,N,N,N,N,Y) SOLUTN(STRX,Y,N,N,N,N,Y) SOLUTN(P1TH,Y,N,N,N,N,Y) SOLUTN(DRH1,Y,N,N,N,N,Y) SOLUTN(DVO1,Y,N,N,N,N,Y) SOLUTN(ENUL,Y,N,N,N,N,Y) SOLUTN(DEN1,Y,N,N,N,N,Y) SOLUTN(PRPS,Y,N,N,N,N,Y) DEN1 = 149 VISL = 148 PRPS = 150 ************************************************************ Group 8. Terms & Devices * Y in TERMS argument list denotes: * 1-built-in source 2-convection 3-diffusion 4-transient * 5-first phase variable 6-interphase transport TERMS(P1,Y,Y,Y,N,Y,Y) TERMS(U1,Y,Y,Y,Y,Y,Y) DIFCUT =0.5 ;ZDIFAC =1. GALA = F ;ADDDIF = F ISOLX = -1 ;ISOLY = -1 ;ISOLZ = -1 ************************************************************ Group 9. Properties used if PRPS is not stored, and where PRPS = -1.0 if it is! RHO1 =7800. ;TMP1 =0. EL1 =0. TSURR =0. ;TEMP0 =0. PRESS0 =0. DVO1DT =3.7E-06 ;DRH1DP =5.0E-12 EMISS =0. ;SCATT =0. RADIA =0. ;RADIB =0. ENUL =0.3 ;ENUT =0. PRNDTL(U1)=1. PRT(U1)=1. CP1 =473. ;CP2 =1. * List of user-defined materials to be read by EARTH MATFLG=T;IMAT=1 * Name *Ind. Dens. Viscos. Spec.heat Conduct. Expans. Compr. *160 7800.0 0.3 473.0 43.0 0.37E-5 0.5E-11 ************************************************************ Group 10.Inter-Phase Transfer Processes ************************************************************ Group 11.Initial field variables (PHIs) FIINIT(P1)=0. ;FIINIT(U1)=0. FIINIT(EZ/T)=1.0E-10 ;FIINIT(EY/T)=1.0E-10 FIINIT(EX/T)=1.0E-10 ;FIINIT(SZ/T)=1.0E-10 FIINIT(SY/T)=1.0E-10 ;FIINIT(SX/T)=1.0E-10 FIINIT(EZTH)=-1.234E-11 ;FIINIT(EPSZ)=1.001E-10 FIINIT(EYTH)=-1.234E-11 ;FIINIT(EPSY)=1.001E-10 FIINIT(EXTH)=-1.234E-11 ;FIINIT(EPSX)=1.001E-10 FIINIT(SZTH)=-1.234E-11 ;FIINIT(STRZ)=1.001E-10 FIINIT(SYTH)=-1.234E-11 ;FIINIT(STRY)=1.001E-10 FIINIT(SXTH)=-1.234E-11 ;FIINIT(STRX)=1.001E-10 FIINIT(P1TH)=1.001E-10 ;FIINIT(DRH1)=1.001E-10 FIINIT(DVO1)=1.001E-10 ;FIINIT(ENUL)=1.001E-10 FIINIT(DEN1)=1.001E-10 ;FIINIT(PRPS)=160. No PATCHes yet used for this Group INIADD = F FSWEEP = 1 NAMFI =CHAM ************************************************************ Group 12. Patchwise adjustment of terms Patches for this group are printed with those for Group 13. Their names begin either with GP12 or & ************************************************************ Group 13. Boundary & Special Sources PATCH(WFOR ,WEST , 1, 1, 1, 1, 1, 1, 1, 1) COVAL(WFOR ,U1 ,In-Form:source - see Grp 19) PATCH(EFIX ,EWALL , 10, 10, 1, 1, 1, 1, 1, 1) COVAL(EFIX ,U1 ,In-Form:source - see Grp 19) PATCH(INF1 ,EAST , 10, 10, 1, 1, 1, 1, 1, 1) COVAL(INF1 ,U1 ,In-Form:source - see Grp 19) XCYCLE = F EGWF = T WALLCO = GRND2 ************************************************************ Group 14. Downstream Pressure For PARAB ************************************************************ Group 15. Terminate Sweeps LSWEEP = 10 ;ISWC1 = 1 LITHYD = 1 ;LITFLX = 1 ;LITC = 1 ;ITHC1 = 1 SELREF = T RESFAC =1.0E-03 ************************************************************ Group 16. Terminate Iterations LITER(P1)=20 ;LITER(U1)=10 ENDIT(P1)=1.0E-03 ;ENDIT(U1)=1.0E-03 ************************************************************ Group 17. Relaxation RELAX(P1,LINRLX,1.) RELAX(U1,FALSDT,1.) RELAX(EZ/T,LINRLX,1.) RELAX(EY/T,LINRLX,1.) RELAX(EX/T,LINRLX,1.) RELAX(SZ/T,LINRLX,1.) RELAX(SY/T,LINRLX,1.) RELAX(SX/T,LINRLX,1.) RELAX(EZTH,LINRLX,1.) RELAX(EPSZ,LINRLX,1.) RELAX(EYTH,LINRLX,1.) RELAX(EPSY,LINRLX,1.) RELAX(EXTH,LINRLX,1.) RELAX(EPSX,LINRLX,1.) RELAX(SZTH,LINRLX,1.) RELAX(STRZ,LINRLX,1.) RELAX(SYTH,LINRLX,1.) RELAX(STRY,LINRLX,1.) RELAX(SXTH,LINRLX,1.) RELAX(STRX,LINRLX,1.) RELAX(P1TH,LINRLX,1.) RELAX(DRH1,LINRLX,1.) RELAX(DVO1,LINRLX,1.) RELAX(ENUL,LINRLX,1.) RELAX(DEN1,LINRLX,1.) RELAX(PRPS,LINRLX,1.) OVRRLX =0. EXPERT = F ;NNORSL = F ************************************************************ Group 18. Limits VARMAX(P1)=1.0E+10 ;VARMIN(P1)=-1.0E+10 VARMAX(U1)=1.0E+06 ;VARMIN(U1)=-1.0E+06 VARMAX(EZ/T)=1.0E+10 ;VARMIN(EZ/T)=-1.0E+10 VARMAX(EY/T)=1.0E+10 ;VARMIN(EY/T)=-1.0E+10 VARMAX(EX/T)=1.0E+10 ;VARMIN(EX/T)=-1.0E+10 VARMAX(SZ/T)=1.0E+10 ;VARMIN(SZ/T)=-1.0E+10 VARMAX(SY/T)=1.0E+10 ;VARMIN(SY/T)=-1.0E+10 VARMAX(SX/T)=1.0E+10 ;VARMIN(SX/T)=-1.0E+10 VARMAX(EZTH)=1.0E+10 ;VARMIN(EZTH)=-1.0E+10 VARMAX(EPSZ)=1.0E+10 ;VARMIN(EPSZ)=-1.0E+10 VARMAX(EYTH)=1.0E+10 ;VARMIN(EYTH)=-1.0E+10 VARMAX(EPSY)=1.0E+10 ;VARMIN(EPSY)=-1.0E+10 VARMAX(EXTH)=1.0E+10 ;VARMIN(EXTH)=-1.0E+10 VARMAX(EPSX)=1.0E+10 ;VARMIN(EPSX)=-1.0E+10 VARMAX(SZTH)=1.0E+10 ;VARMIN(SZTH)=-1.0E+10 VARMAX(STRZ)=1.0E+10 ;VARMIN(STRZ)=-1.0E+10 VARMAX(SYTH)=1.0E+10 ;VARMIN(SYTH)=-1.0E+10 VARMAX(STRY)=1.0E+10 ;VARMIN(STRY)=-1.0E+10 VARMAX(SXTH)=1.0E+10 ;VARMIN(SXTH)=-1.0E+10 VARMAX(STRX)=1.0E+10 ;VARMIN(STRX)=-1.0E+10 VARMAX(P1TH)=1.0E+10 ;VARMIN(P1TH)=-1.0E+10 VARMAX(DRH1)=1.0E+10 ;VARMIN(DRH1)=-1.0E+10 VARMAX(DVO1)=1.0E+10 ;VARMIN(DVO1)=-1.0E+10 VARMAX(ENUL)=1.0E+10 ;VARMIN(ENUL)=-1.0E+10 VARMAX(DEN1)=1.0E+10 ;VARMIN(DEN1)=-1.0E+10 VARMAX(PRPS)=1.0E+10 ;VARMIN(PRPS)=-1.0E+10 ************************************************************ Group 19. Data transmitted to GROUND STRA = T PARSOL = F ISG21 = 10 ISG50 = 1 ISG52 = 1 ISG62 = 1 CSG10 ='q1' SPEDAT(SET,DOMAIN,PHASE_1_MAT,I,160) SPEDAT(SET,DOMAIN,PROPS_FILE_1,C,Q1) SPEDAT(SET,BOUNDARY,YCONST,R,1.0E+20) SPEDAT(SET,BOUNDARY,ZCONST,R,1.0E+20) SPEDAT(SET,STORED,SXTH,C,=1.0E+09!IMAT>100!ZSLFIN) SPEDAT(SET,STORED,SYTH,C,=4.285714E+08!IMAT>100!ZSLFIN) SPEDAT(SET,STORED,SZTH,C,=4.285714E+08!IMAT>100!ZSLFIN) SPEDAT(SET,STORED,EXTH,C,=3.714286E-03!IMAT>100!ZSLFIN) SPEDAT(SET,STORED,EYTH,C,=0.!IMAT>100!ZSLFIN) SPEDAT(SET,STORED,EZTH,C,=0.!IMAT>100!ZSLFIN) SPEDAT(SET,STORED,P1TH,C,=0.!IMAT>100!ZSLFIN) SPEDAT(SET,STORED,P1TH,C,=3.714286E-03!ZSLFIN) SPEDAT(SET,STORED,SX/T,C,=STRX/SXTH!IMAT>100!ZSLFIN) SPEDAT(SET,STORED,SY/T,C,=STRY/SYTH!IMAT>100!ZSLFIN) SPEDAT(SET,STORED,SZ/T,C,=STRZ/SZTH!IMAT>100!ZSLFIN) SPEDAT(SET,STORED,EX/T,C,=EPSX/EXTH!IMAT>100!ZSLFIN) SPEDAT(SET,STORED,EY/T,C,=EPSY/EYTH!IMAT>100!ZSLFIN) SPEDAT(SET,STORED,EZ/T,C,=EPSZ/EZTH!IMAT>100!ZSLFIN) SPEDAT(SET,SOURCE,U1!EFIX,C,=COVAL(1.0/AEAST*(1.0)&0.0)) SPEDAT(SET,SOURCE,U1!WFOR,C,=COVAL(2.0E-10&1.0/AEAST*(-1*1.0E+09))) SPEDAT(SET,OBJNAM,!WFOR,C,WFOR) SPEDAT(SET,OBJTYP,!WFOR,C,USER_DEFINED) SPEDAT(SET,OBJNAM,!EFIX,C,EFIX) SPEDAT(SET,OBJTYP,!EFIX,C,USER_DEFINED) SPEDAT(SET,FACETDAT,NUMOBJ,I,4) SPEDAT(SET,OBJNAM,!INF1,C,EFIX) SPEDAT(SET,OBJTYP,!INF1,C,USER_DEFINED) SPEDAT(SET,MATERIAL,160,L,T) ************************************************************ Group 20. Preliminary Printout ************************************************************ Group 21. Print-out of Variables INIFLD = F ;SUBWGR = F * Y in OUTPUT argument list denotes: * 1-field 2-correction-eq. monitor 3-selective dumping * 4-whole-field residual 5-spot-value table 6-residual table OUTPUT(P1,Y,N,Y,Y,Y,Y) OUTPUT(U1,Y,N,Y,Y,Y,Y) OUTPUT(EZ/T,Y,N,Y,N,N,N) OUTPUT(EY/T,Y,N,Y,N,N,N) OUTPUT(EX/T,Y,N,Y,N,N,N) OUTPUT(SZ/T,Y,N,Y,N,N,N) OUTPUT(SY/T,Y,N,Y,N,N,N) OUTPUT(SX/T,Y,N,Y,N,N,N) OUTPUT(EZTH,Y,N,Y,N,N,N) OUTPUT(EPSZ,Y,N,Y,N,N,N) OUTPUT(EYTH,Y,N,Y,N,N,N) OUTPUT(EPSY,Y,N,Y,N,N,N) OUTPUT(EXTH,Y,N,Y,N,N,N) OUTPUT(EPSX,Y,N,Y,N,N,N) OUTPUT(SZTH,Y,N,Y,N,N,N) OUTPUT(STRZ,Y,N,Y,N,N,N) OUTPUT(SYTH,Y,N,Y,N,N,N) OUTPUT(STRY,Y,N,Y,N,N,N) OUTPUT(SXTH,Y,N,Y,N,N,N) OUTPUT(STRX,Y,N,Y,N,N,N) OUTPUT(P1TH,Y,N,Y,N,N,N) OUTPUT(DRH1,Y,N,Y,N,N,N) OUTPUT(DVO1,Y,N,Y,N,N,N) OUTPUT(ENUL,Y,N,Y,N,N,N) OUTPUT(DEN1,Y,N,Y,N,N,N) OUTPUT(PRPS,Y,N,Y,N,N,N) ************************************************************ Group 22. Monitor Print-Out IXMON = 1 ;IYMON = 1 ;IZMON = 1 NPRMON = 100000 ;NPRMNT = 1 ;TSTSWP = -1 UWATCH = T ;USTEER = T HIGHLO = F ************************************************************ Group 23.Field Print-Out & Plot Control NPRINT = 100000 ;NUMCLS = 5 NXPRIN = -1 ;IXPRF = 1 ;IXPRL = 10000 IPLTF = 1 ;IPLTL = -1 ;NPLT = -1 ISWPRF = 1 ;ISWPRL = 100000 ITABL = 3 ;IPROF = 1 ABSIZ =0.5 ;ORSIZ =0.4 NTZPRF = 1 ;NCOLPF = 50 ICHR = 2 ;NCOLCO = 45 ;NROWCO = 20 No PATCHes yet used for this Group ************************************************************ Group 24. Dumps For Restarts SAVE = T ;NOWIPE = F NSAVE =CHAM STOP