TALK=T;RUN(1,1)
  DISPLAY
  A cubical block is subjected to z-direction tension, under
  three possible lateral-constraint conditions:
  1. no constraint
  2. lateral displacement in x and y directions prevented
  3. lateral displacement prevented only in x direction

  Because the z-direction displacements depend only on z, NX and NY,
  the number of x- and y-direction intervals, are both set to 1.

  The boolean variable 'direct' toggles which end is fixed and which
  is pulled.

  The stresses and strains are calculated; and their textbook
  values also. the former divided by the latter are printed as:
    SX/T, EX/T, etc, the values of which should be close to 1.0
  (but they will be printed as 0.0 if the theoretical value is
  0.0)

  ENDDIS
 ************************************************************
  Group 1. Run Title and Number
 ************************************************************
 ************************************************************
 
 TEXT(CUBEINX-DIRECTIONTENSION                )
 
 ************************************************************
 ************************************************************
 
 IRUNN = 1 ;LIBREF = 0
 ************************************************************
  Group 2. Time dependence
 STEADY = T
 ************************************************************
  Group 3. X-Direction Grid Spacing
 CARTES = T
 NX = 1
 XULAST =1.
 XFRAC(1)=1.
 ************************************************************
  Group 4. Y-Direction Grid Spacing
 NY = 1
 YVLAST =1.
 YFRAC(1)=1.
 ************************************************************
  Group 5. Z-Direction Grid Spacing
 PARAB = F
 NZ = 10
 ZWLAST =10.
 ZFRAC(1)=0.1 ;ZFRAC(2)=0.2
 ZFRAC(3)=0.3 ;ZFRAC(4)=0.4
 ZFRAC(5)=0.5 ;ZFRAC(6)=0.6
 ZFRAC(7)=0.7 ;ZFRAC(8)=0.8
 ZFRAC(9)=0.9 ;ZFRAC(10)=1.
 ************************************************************
  Group 6. Body-Fitted Coordinates
 ************************************************************
  Group 7. Variables: STOREd,SOLVEd,NAMEd
 ONEPHS = T
 NAME(1)=P1 ;NAME(7)=W1
 NAME(127)=EZ/T ;NAME(128)=EY/T
 NAME(129)=EX/T ;NAME(130)=SZ/T
 NAME(131)=SY/T ;NAME(132)=SX/T
 NAME(133)=EZTH ;NAME(134)=EPSZ
 NAME(135)=EYTH ;NAME(136)=EPSY
 NAME(137)=EXTH ;NAME(138)=EPSX
 NAME(139)=SZTH ;NAME(140)=STRZ
 NAME(141)=SYTH ;NAME(142)=STRY
 NAME(143)=SXTH ;NAME(144)=STRX
 NAME(145)=P1TH ;NAME(146)=DRH1
 NAME(147)=DVO1 ;NAME(148)=ENUL
 NAME(149)=DEN1 ;NAME(150)=PRPS
    * Y in SOLUTN argument list denotes:
    * 1-stored 2-solved 3-whole-field
    * 4-point-by-point 5-explicit 6-harmonic averaging 
 SOLUTN(P1,Y,Y,N,N,N,Y)
 SOLUTN(W1,Y,Y,N,N,N,Y)
 SOLUTN(EZ/T,Y,N,N,N,N,N)
 SOLUTN(EY/T,Y,N,N,N,N,N)
 SOLUTN(EX/T,Y,N,N,N,N,N)
 SOLUTN(SZ/T,Y,N,N,N,N,N)
 SOLUTN(SY/T,Y,N,N,N,N,N)
 SOLUTN(SX/T,Y,N,N,N,N,N)
 SOLUTN(EZTH,Y,N,N,N,N,Y)
 SOLUTN(EPSZ,Y,N,N,N,N,Y)
 SOLUTN(EYTH,Y,N,N,N,N,Y)
 SOLUTN(EPSY,Y,N,N,N,N,Y)
 SOLUTN(EXTH,Y,N,N,N,N,Y)
 SOLUTN(EPSX,Y,N,N,N,N,Y)
 SOLUTN(SZTH,Y,N,N,N,N,Y)
 SOLUTN(STRZ,Y,N,N,N,N,Y)
 SOLUTN(SYTH,Y,N,N,N,N,Y)
 SOLUTN(STRY,Y,N,N,N,N,Y)
 SOLUTN(SXTH,Y,N,N,N,N,Y)
 SOLUTN(STRX,Y,N,N,N,N,Y)
 SOLUTN(P1TH,Y,N,N,N,N,Y)
 SOLUTN(DRH1,Y,N,N,N,N,Y)
 SOLUTN(DVO1,Y,N,N,N,N,Y)
 SOLUTN(ENUL,Y,N,N,N,N,Y)
 SOLUTN(DEN1,Y,N,N,N,N,Y)
 SOLUTN(PRPS,Y,N,N,N,N,Y)
 DEN1 = 149
 VISL = 148
 PRPS = 150
 ************************************************************
  Group 8. Terms & Devices
    * Y in TERMS argument list denotes:
    * 1-built-in source 2-convection 3-diffusion 4-transient
    * 5-first phase variable 6-interphase transport         
 TERMS(P1,Y,Y,Y,N,Y,Y)
 TERMS(W1,Y,Y,Y,Y,Y,Y)
 DIFCUT =0.5 ;ZDIFAC =1.
 GALA = F ;ADDDIF = F
 ISOLX = -1 ;ISOLY = -1 ;ISOLZ = -1
 ************************************************************
  Group 9. Properties used if PRPS is not
  stored, and where PRPS = -1.0 if it is!
 RHO1 =7800. ;TMP1 =0. ;EL1 =0.
 TSURR =0. ;TEMP0 =0. ;PRESS0 =0.
 DVO1DT =3.7E-06 ;DRH1DP =5.0E-12
 EMISS =0. ;SCATT =0.
 RADIA =0. ;RADIB =0.
 ENUL =0.3 ;ENUT =0.
 PRNDTL(W1)=1.
 PRT(W1)=1.
 CP1 =473. ;CP2 =1.
   *  List of user-defined materials to be read by EARTH
    MATFLG=T;IMAT=1   
   *  Name
   *Ind. Dens.  Viscos.  Spec.heat  Conduct.  Expans.  Compr.
   *  
    160 7800.0 0.3 473.0 43.0 0.37E-5 0.5E-11
 ************************************************************
  Group 10.Inter-Phase Transfer Processes
 ************************************************************
  Group 11.Initial field variables (PHIs)
 FIINIT(P1)=0. ;FIINIT(W1)=0.
 FIINIT(EZ/T)=1.0E-10 ;FIINIT(EY/T)=1.0E-10
 FIINIT(EX/T)=1.0E-10 ;FIINIT(SZ/T)=1.0E-10
 FIINIT(SY/T)=1.0E-10 ;FIINIT(SX/T)=1.0E-10
 FIINIT(EZTH)=-1.234E-11 ;FIINIT(EPSZ)=1.001E-10
 FIINIT(EYTH)=-1.234E-11 ;FIINIT(EPSY)=1.001E-10
 FIINIT(EXTH)=-1.234E-11 ;FIINIT(EPSX)=1.001E-10
 FIINIT(SZTH)=-1.234E-11 ;FIINIT(STRZ)=1.001E-10
 FIINIT(SYTH)=-1.234E-11 ;FIINIT(STRY)=1.001E-10
 FIINIT(SXTH)=-1.234E-11 ;FIINIT(STRX)=1.001E-10
 FIINIT(P1TH)=1.001E-10 ;FIINIT(DRH1)=1.001E-10
 FIINIT(DVO1)=1.001E-10 ;FIINIT(ENUL)=1.001E-10
 FIINIT(DEN1)=1.001E-10 ;FIINIT(PRPS)=160.
   No PATCHes yet used for this Group
 INIADD = F
 FSWEEP = 1
 NAMFI =CHAM
 ************************************************************
  Group 12. Patchwise adjustment of terms
  Patches for this group are printed with those
  for Group 13.
  Their names begin either with GP12 or &
 ************************************************************
  Group 13. Boundary & Special Sources
 
 PATCH(LFOR ,LOW , 1, 1, 1, 1, 1, 1, 1, 1)
 COVAL(LFOR ,W1 ,In-Form:source - see Grp 19)
 
 PATCH(HFIX ,HWALL , 1, 1, 1, 1, 10, 10, 1, 1)
 COVAL(HFIX ,W1 ,In-Form:source - see Grp 19)
 
 PATCH(INF1 ,HIGH , 1, 1, 1, 1, 10, 10, 1, 1)
 COVAL(INF1 ,W1 ,In-Form:source - see Grp 19)
 XCYCLE = F
 EGWF = T
 WALLCO = GRND2
 ************************************************************
  Group 14. Downstream Pressure For PARAB
 ************************************************************
  Group 15. Terminate Sweeps
 LSWEEP = 10 ;ISWC1 = 1
 LITHYD = 1 ;LITFLX = 1 ;LITC = 1 ;ITHC1 = 1
 SELREF = T
 RESFAC =1.0E-03
 ************************************************************
  Group 16. Terminate Iterations
 LITER(P1)=20 ;LITER(W1)=10
 ENDIT(P1)=1.0E-03 ;ENDIT(W1)=1.0E-03
 ************************************************************
  Group 17. Relaxation
 RELAX(P1,LINRLX,1.)
 RELAX(W1,FALSDT,1.)
 RELAX(EZ/T,LINRLX,1.)
 RELAX(EY/T,LINRLX,1.)
 RELAX(EX/T,LINRLX,1.)
 RELAX(SZ/T,LINRLX,1.)
 RELAX(SY/T,LINRLX,1.)
 RELAX(SX/T,LINRLX,1.)
 RELAX(EZTH,LINRLX,1.)
 RELAX(EPSZ,LINRLX,1.)
 RELAX(EYTH,LINRLX,1.)
 RELAX(EPSY,LINRLX,1.)
 RELAX(EXTH,LINRLX,1.)
 RELAX(EPSX,LINRLX,1.)
 RELAX(SZTH,LINRLX,1.)
 RELAX(STRZ,LINRLX,1.)
 RELAX(SYTH,LINRLX,1.)
 RELAX(STRY,LINRLX,1.)
 RELAX(SXTH,LINRLX,1.)
 RELAX(STRX,LINRLX,1.)
 RELAX(P1TH,LINRLX,1.)
 RELAX(DRH1,LINRLX,1.)
 RELAX(DVO1,LINRLX,1.)
 RELAX(ENUL,LINRLX,1.)
 RELAX(DEN1,LINRLX,1.)
 RELAX(PRPS,LINRLX,1.)
 OVRRLX =0.
 EXPERT = F ;NNORSL = F
 ************************************************************
  Group 18. Limits
 VARMAX(P1)=1.0E+10 ;VARMIN(P1)=-1.0E+10
 VARMAX(W1)=1.0E+06 ;VARMIN(W1)=-1.0E+06
 VARMAX(EZ/T)=1.0E+10 ;VARMIN(EZ/T)=-1.0E+10
 VARMAX(EY/T)=1.0E+10 ;VARMIN(EY/T)=-1.0E+10
 VARMAX(EX/T)=1.0E+10 ;VARMIN(EX/T)=-1.0E+10
 VARMAX(SZ/T)=1.0E+10 ;VARMIN(SZ/T)=-1.0E+10
 VARMAX(SY/T)=1.0E+10 ;VARMIN(SY/T)=-1.0E+10
 VARMAX(SX/T)=1.0E+10 ;VARMIN(SX/T)=-1.0E+10
 VARMAX(EZTH)=1.0E+10 ;VARMIN(EZTH)=-1.0E+10
 VARMAX(EPSZ)=1.0E+10 ;VARMIN(EPSZ)=-1.0E+10
 VARMAX(EYTH)=1.0E+10 ;VARMIN(EYTH)=-1.0E+10
 VARMAX(EPSY)=1.0E+10 ;VARMIN(EPSY)=-1.0E+10
 VARMAX(EXTH)=1.0E+10 ;VARMIN(EXTH)=-1.0E+10
 VARMAX(EPSX)=1.0E+10 ;VARMIN(EPSX)=-1.0E+10
 VARMAX(SZTH)=1.0E+10 ;VARMIN(SZTH)=-1.0E+10
 VARMAX(STRZ)=1.0E+10 ;VARMIN(STRZ)=-1.0E+10
 VARMAX(SYTH)=1.0E+10 ;VARMIN(SYTH)=-1.0E+10
 VARMAX(STRY)=1.0E+10 ;VARMIN(STRY)=-1.0E+10
 VARMAX(SXTH)=1.0E+10 ;VARMIN(SXTH)=-1.0E+10
 VARMAX(STRX)=1.0E+10 ;VARMIN(STRX)=-1.0E+10
 VARMAX(P1TH)=1.0E+10 ;VARMIN(P1TH)=-1.0E+10
 VARMAX(DRH1)=1.0E+10 ;VARMIN(DRH1)=-1.0E+10
 VARMAX(DVO1)=1.0E+10 ;VARMIN(DVO1)=-1.0E+10
 VARMAX(ENUL)=1.0E+10 ;VARMIN(ENUL)=-1.0E+10
 VARMAX(DEN1)=1.0E+10 ;VARMIN(DEN1)=-1.0E+10
 VARMAX(PRPS)=1.0E+10 ;VARMIN(PRPS)=-1.0E+10
 ************************************************************
  Group 19. Data transmitted to GROUND
 STRA = T
 PARSOL = F
 ISG21 = 10
 ISG50 = 1
 ISG52 = 1
 ISG62 = 1
 CSG10   ='q1'
 SPEDAT(SET,DOMAIN,PHASE_1_MAT,I,160)
 SPEDAT(SET,DOMAIN,PROPS_FILE_1,C,Q1)
 SPEDAT(SET,BOUNDARY,YCONST,R,1.0E+20)
 SPEDAT(SET,BOUNDARY,XCONST,R,1.0E+20)
 SPEDAT(SET,STORED,SXTH,C,=4.285714E+08!IMAT>100!ZSLFIN)
 SPEDAT(SET,STORED,SYTH,C,=4.285714E+08!IMAT>100!ZSLFIN)
 SPEDAT(SET,STORED,SZTH,C,=1.0E+09!IMAT>100!ZSLFIN)
 SPEDAT(SET,STORED,EXTH,C,=0.!IMAT>100!ZSLFIN)
 SPEDAT(SET,STORED,EYTH,C,=0.!IMAT>100!ZSLFIN)
 SPEDAT(SET,STORED,EZTH,C,=3.714286E-03!IMAT>100!ZSLFIN)
 SPEDAT(SET,STORED,P1TH,C,=3.714286E-03!IMAT>100!ZSLFIN)
 SPEDAT(SET,STORED,P1TH,C,=3.714286E-03!ZSLFIN)
 SPEDAT(SET,STORED,SX/T,C,=STRX/SXTH!IMAT>100!ZSLFIN)
 SPEDAT(SET,STORED,SY/T,C,=STRY/SYTH!IMAT>100!ZSLFIN)
 SPEDAT(SET,STORED,SZ/T,C,=STRZ/SZTH!IMAT>100!ZSLFIN)
 SPEDAT(SET,STORED,EX/T,C,=EPSX/EXTH!IMAT>100!ZSLFIN)
 SPEDAT(SET,STORED,EY/T,C,=EPSY/EYTH!IMAT>100!ZSLFIN)
 SPEDAT(SET,STORED,EZ/T,C,=EPSZ/EZTH!IMAT>100!ZSLFIN)
 SPEDAT(SET,SOURCE,W1!HFIX,C,=COVAL(1.0/AHIGH*(1.0)&0.0))
 SPEDAT(SET,SOURCE,W1!LFOR,C,=COVAL(2.0E-10&1.0/AHIGH*(-1*1.0E+09)))
 SPEDAT(SET,GXMONI,PLOTALL,L,T)
 SPEDAT(SET,OBJNAM,!LFOR,C,LFOR)
 SPEDAT(SET,OBJTYP,!LFOR,C,USER_DEFINED)
 SPEDAT(SET,OBJNAM,!HFIX,C,HFIX)
 SPEDAT(SET,OBJTYP,!HFIX,C,USER_DEFINED)
 SPEDAT(SET,FACETDAT,NUMOBJ,I,4)
 SPEDAT(SET,OBJNAM,!INF1,C,HFIX)
 SPEDAT(SET,OBJTYP,!INF1,C,USER_DEFINED)
 SPEDAT(SET,MATERIAL,160,L,T)
 ************************************************************
  Group 20. Preliminary Printout
 ************************************************************
  Group 21. Print-out of Variables
 INIFLD = F ;SUBWGR = F
    * Y in OUTPUT argument list denotes:
    * 1-field 2-correction-eq. monitor 3-selective dumping      
    * 4-whole-field residual 5-spot-value table 6-residual table
 OUTPUT(P1,Y,N,Y,Y,Y,Y)
 OUTPUT(W1,Y,N,Y,Y,Y,Y)
 OUTPUT(EZ/T,Y,N,Y,N,N,N)
 OUTPUT(EY/T,Y,N,Y,N,N,N)
 OUTPUT(EX/T,Y,N,Y,N,N,N)
 OUTPUT(SZ/T,Y,N,Y,N,N,N)
 OUTPUT(SY/T,Y,N,Y,N,N,N)
 OUTPUT(SX/T,Y,N,Y,N,N,N)
 OUTPUT(EZTH,Y,N,Y,N,N,N)
 OUTPUT(EPSZ,Y,N,Y,N,N,N)
 OUTPUT(EYTH,Y,N,Y,N,N,N)
 OUTPUT(EPSY,Y,N,Y,N,N,N)
 OUTPUT(EXTH,Y,N,Y,N,N,N)
 OUTPUT(EPSX,Y,N,Y,N,N,N)
 OUTPUT(SZTH,Y,N,Y,N,N,N)
 OUTPUT(STRZ,Y,N,Y,N,N,N)
 OUTPUT(SYTH,Y,N,Y,N,N,N)
 OUTPUT(STRY,Y,N,Y,N,N,N)
 OUTPUT(SXTH,Y,N,Y,N,N,N)
 OUTPUT(STRX,Y,N,Y,N,N,N)
 OUTPUT(P1TH,Y,N,Y,N,N,N)
 OUTPUT(DRH1,Y,N,Y,N,N,N)
 OUTPUT(DVO1,Y,N,Y,N,N,N)
 OUTPUT(ENUL,Y,N,Y,N,N,N)
 OUTPUT(DEN1,Y,N,Y,N,N,N)
 OUTPUT(PRPS,Y,N,Y,N,N,N)
 ************************************************************
  Group 22. Monitor Print-Out
 IXMON = 1 ;IYMON = 1 ;IZMON = 1
 NPRMON = 100000 ;NPRMNT = 1 ;TSTSWP = -1
 UWATCH = T ;USTEER = T
 HIGHLO = F
 ************************************************************
  Group 23.Field Print-Out & Plot Control
 NPRINT = 100000 ;NUMCLS = 5
 NZPRIN = -1 ;IZPRF = 1 ;IZPRL = 10000
 XZPR = F ;YZPR = F
 IPLTF = 1 ;IPLTL = -1 ;NPLT = -1
 ISWPRF = 1 ;ISWPRL = 100000
 ITABL = 3 ;IPROF = 1
 ABSIZ =0.5 ;ORSIZ =0.4
 NTZPRF = 1 ;NCOLPF = 50
 ICHR = 2 ;NCOLCO = 45 ;NROWCO = 20
   No PATCHes yet used for this Group
 ************************************************************
  Group 24. Dumps For Restarts
 SAVE = T ;NOWIPE = F
 NSAVE =CHAM
STOP