TALK=T;RUN(1,1)
  PHOTON USE
  p;;;;;

  set prop off

  vec z 1 x 1 24 y 1 24 sh
  vec z 1 x 49 72 y 1 24 sh
  vec z 1 x 25 48 y 1 12 sh
  msg displacement vectors in solid region only
  *dump dispvecs
  pause

  use patgeo
  vec z 1 sh
  msg velocity and displacement vectors
  pause;
  *dump allvecs;vec off;red

  vec z 1 x 1 72 y 25 36 sh
  vec z 1 x 25 48 y 13 m sh
  msg velocity vectors in fluid region only
  *dump vels

  pause ;

  vec off;red
  msg solid region
  con epst z 1 x 1 m y 1 12 fi;0.001
  con epst z 1 x 1 24 y 1 24 fi;0.001
  con epst z 1 x 49 m y 1 24 fi;0.001
  msg contours of thermal expansion
  pause;
  *dump epst;con off;red

  con epsx z 1 x 1 m y 1 12 fi;0.001
  con epsx z 1 x 1 24 y 1 24 fi;0.001
  con epsx z 1 x 49 m y 1 24 fi;0.001
  msg contours of horizontal-direction strain
  pause;
  *dump epsx;con off;red

  con epsy z 1 x 1 m y 1 12 fi;0.001
  con epsy z 1 x 1 24 y 1 24 fi;0.001
  con epsy z 1 x 49 m y 1 24 fi;0.001
  msg contours of vertical-direction strain
  pause;
  *dump epsy;con off;red

  con strx z 1 x 1 m y 1 12 fi;0.001
  con strx z 1 x 1 24 y 1 24 fi;0.001
  con strx z 1 x 49 m y 1 24 fi;0.001
  msg contours of horizontal-direction stress
  pause;
  *dump strx;con off;red

  con stry z 1 x 1 m y 1 12 fi;0.001
  con stry z 1 x 1 24 y 1 24 fi;0.001
  con stry z 1 x 49 m y 1 24 fi;0.001
  msg contours of vertical-direction stress
  pause;
  *dump stry;con off;red



  vec off;red
  con wdis z 1 x 1 72 y 25 36 fi;0.001
  con wdis z 1 x 25 48 y 13 36 fi;0.001
  msg contours of distance to the nearest wall
  pause;
  *dump wdis;con off;red

  con wgap z 1 x 1 72 y 25 36 fi;0.001
  con wgap z 1 x 25 48 y 13 36 fi;0.001
  msg contours of distance between walls
  pause;
  *dump wgap;con off;red

  con ltls z 1 x 1 72 y 25 36 fi;0.001
  con ltls z 1 x 25 48 y 13 36 fi;0.001
  msg contours of ltls, from which wdis and wgap are deduced
  pause;
  *dump ltls;con off;red

  con enut z 1 x 1 72 y 25 36 fi;0.001
  con enut z 1 x 25 48 y 13 36 fi;0.001
  msg contours of effective (laminar plus turbulent) velocity
  pause;
  *dump enut;con off;red

  con qrx z 1 x 1 72 y 25 36 fi;0.001
  con qrx z 1 x 25 48 y 13 36 fi;0.001
  msg horizontal-direction radiation flux
  pause;
  *dump qrx;con off;red

  con qry z 1 x 1 72 y 25 36 fi;0.001
  con qry z 1 x 25 48 y 13 36 fi;0.001
  msg vertical-direction radiation flux
  pause;
  *dump qry;con off;red

  msg whole domain
  con tem1 z 1 fi;0.001;use patgeo
  ** con tem1 z 1;int 50
  msg contours of "true" temperature
  pause;
  *dump tem1;con off;red
  con t3 z 1 fi;0.001; use patgeo
  msg contours of "radiant" temperature
  **con t3 z 1 ;int 50
  pause;
  *dump t3;con off;red

  ENDUSE
  DISPLAY

  For the description of this "multi-physics example", see PHOENICS
  Encyclopaedia article on Stress and strain in solids.
  /phoenics/d_polis/d_enc/stress1.htm#multi

  In addition to illustrating the calculation of stresses in solids,
  this case exemplifies also the use of IMMERSOL and LVEL.

  ENDDIS
 ************************************************************
  Group 1. Run Title and Number
 ************************************************************
 ************************************************************
 
 TEXT(Multi-Physics.  Reyno= 1000.   Unit=12  )
 
 ************************************************************
 ************************************************************
 
 IRUNN = 1 ;LIBREF = 0
 ************************************************************
  Group 2. Time dependence
 STEADY = T
 ************************************************************
  Group 3. X-Direction Grid Spacing
 CARTES = T
 NX = 72
 XULAST =0.03
 XFRAC(1)=0.013889 ;XFRAC(2)=0.027778
 XFRAC(3)=0.041667 ;XFRAC(4)=0.055556
 XFRAC(5)=0.069444 ;XFRAC(6)=0.083333
 XFRAC(7)=0.097222 ;XFRAC(8)=0.111111
 XFRAC(9)=0.125 ;XFRAC(10)=0.138889
 XFRAC(11)=0.152778 ;XFRAC(12)=0.166667
 XFRAC(13)=0.180556 ;XFRAC(14)=0.194444
 XFRAC(15)=0.208333 ;XFRAC(16)=0.222222
 XFRAC(17)=0.236111 ;XFRAC(18)=0.25
 XFRAC(19)=0.263889 ;XFRAC(20)=0.277778
 XFRAC(21)=0.291667 ;XFRAC(22)=0.305556
 XFRAC(23)=0.319444 ;XFRAC(24)=0.333333
 XFRAC(25)=0.347222 ;XFRAC(26)=0.361111
 XFRAC(27)=0.375 ;XFRAC(28)=0.388889
 XFRAC(29)=0.402778 ;XFRAC(30)=0.416667
 XFRAC(31)=0.430556 ;XFRAC(32)=0.444444
 XFRAC(33)=0.458333 ;XFRAC(34)=0.472222
 XFRAC(35)=0.486111 ;XFRAC(36)=0.5
 XFRAC(37)=0.513889 ;XFRAC(38)=0.527778
 XFRAC(39)=0.541667 ;XFRAC(40)=0.555556
 XFRAC(41)=0.569444 ;XFRAC(42)=0.583333
 XFRAC(43)=0.597222 ;XFRAC(44)=0.611111
 XFRAC(45)=0.625 ;XFRAC(46)=0.638889
 XFRAC(47)=0.652778 ;XFRAC(48)=0.666667
 XFRAC(49)=0.680556 ;XFRAC(50)=0.694444
 XFRAC(51)=0.708333 ;XFRAC(52)=0.722222
 XFRAC(53)=0.736111 ;XFRAC(54)=0.75
 XFRAC(55)=0.763889 ;XFRAC(56)=0.777778
 XFRAC(57)=0.791667 ;XFRAC(58)=0.805556
 XFRAC(59)=0.819444 ;XFRAC(60)=0.833333
 XFRAC(61)=0.847222 ;XFRAC(62)=0.861111
 XFRAC(63)=0.875 ;XFRAC(64)=0.888889
 XFRAC(65)=0.902778 ;XFRAC(66)=0.916667
 XFRAC(67)=0.930556 ;XFRAC(68)=0.944444
 XFRAC(69)=0.958333 ;XFRAC(70)=0.972222
 XFRAC(71)=0.986111 ;XFRAC(72)=1.
 ************************************************************
  Group 4. Y-Direction Grid Spacing
 NY = 36
 YVLAST =0.024
 YFRAC(1)=0.027778 ;YFRAC(2)=0.055556
 YFRAC(3)=0.083333 ;YFRAC(4)=0.111111
 YFRAC(5)=0.138889 ;YFRAC(6)=0.166667
 YFRAC(7)=0.194444 ;YFRAC(8)=0.222222
 YFRAC(9)=0.25 ;YFRAC(10)=0.277778
 YFRAC(11)=0.305556 ;YFRAC(12)=0.333333
 YFRAC(13)=0.361111 ;YFRAC(14)=0.388889
 YFRAC(15)=0.416667 ;YFRAC(16)=0.444444
 YFRAC(17)=0.472222 ;YFRAC(18)=0.5
 YFRAC(19)=0.527778 ;YFRAC(20)=0.555556
 YFRAC(21)=0.583333 ;YFRAC(22)=0.611111
 YFRAC(23)=0.638889 ;YFRAC(24)=0.666667
 YFRAC(25)=0.694444 ;YFRAC(26)=0.722222
 YFRAC(27)=0.75 ;YFRAC(28)=0.777778
 YFRAC(29)=0.805556 ;YFRAC(30)=0.833333
 YFRAC(31)=0.861111 ;YFRAC(32)=0.888889
 YFRAC(33)=0.916667 ;YFRAC(34)=0.944444
 YFRAC(35)=0.972222 ;YFRAC(36)=1.
 ************************************************************
  Group 5. Z-Direction Grid Spacing
 PARAB = F
 NZ = 1
 ZWLAST =1.
 ZFRAC(1)=1.
 ************************************************************
  Group 6. Body-Fitted Coordinates
 ************************************************************
  Group 7. Variables: STOREd,SOLVEd,NAMEd
 ONEPHS = T
 NAME(1)=P1 ;NAME(3)=U1
 NAME(5)=V1 ;NAME(129)=LTLS
 NAME(130)=STRZ ;NAME(131)=STRY
 NAME(132)=STRX ;NAME(133)=EPSZ
 NAME(134)=EPSY ;NAME(135)=EPSX
 NAME(136)=EPST ;NAME(137)=RHO1
 NAME(138)=QRY ;NAME(139)=QRX
 NAME(140)=SCAT ;NAME(141)=EMIS
 NAME(142)=DVO1 ;NAME(143)=DRH1
 NAME(144)=VISL ;NAME(145)=WGAP
 NAME(146)=WDIS ;NAME(147)=PRPS
 NAME(148)=ENUT ;NAME(149)=T3
 NAME(150)=TEM1
    * Y in SOLUTN argument list denotes:
    * 1-stored 2-solved 3-whole-field
    * 4-point-by-point 5-explicit 6-harmonic averaging 
 SOLUTN(P1,Y,Y,N,N,N,Y)
 SOLUTN(U1,Y,Y,N,N,N,Y)
 SOLUTN(V1,Y,Y,N,N,N,Y)
 SOLUTN(LTLS,Y,Y,Y,N,N,Y)
 SOLUTN(STRZ,Y,N,N,N,N,Y)
 SOLUTN(STRY,Y,N,N,N,N,Y)
 SOLUTN(STRX,Y,N,N,N,N,Y)
 SOLUTN(EPSZ,Y,N,N,N,N,Y)
 SOLUTN(EPSY,Y,N,N,N,N,Y)
 SOLUTN(EPSX,Y,N,N,N,N,Y)
 SOLUTN(EPST,Y,N,N,N,N,Y)
 SOLUTN(RHO1,Y,N,N,N,N,Y)
 SOLUTN(QRY,Y,N,N,N,N,Y)
 SOLUTN(QRX,Y,N,N,N,N,Y)
 SOLUTN(SCAT,Y,N,N,N,N,Y)
 SOLUTN(EMIS,Y,N,N,N,N,Y)
 SOLUTN(DVO1,Y,N,N,N,N,Y)
 SOLUTN(DRH1,Y,N,N,N,N,Y)
 SOLUTN(VISL,Y,N,N,N,N,Y)
 SOLUTN(WGAP,Y,N,N,N,N,Y)
 SOLUTN(WDIS,Y,N,N,N,N,Y)
 SOLUTN(PRPS,Y,N,N,N,N,Y)
 SOLUTN(ENUT,Y,N,N,N,N,Y)
 SOLUTN(T3,Y,Y,N,N,N,Y)
 SOLUTN(TEM1,Y,Y,N,N,N,Y)
 DEN1 = 137
 VISL = 144
 VIST = 148
 PRPS = 147
 ************************************************************
  Group 8. Terms & Devices
    * Y in TERMS argument list denotes:
    * 1-built-in source 2-convection 3-diffusion 4-transient
    * 5-first phase variable 6-interphase transport         
 TERMS(P1,Y,Y,Y,N,Y,Y)
 TERMS(U1,Y,Y,Y,Y,Y,Y)
 TERMS(V1,Y,Y,Y,Y,Y,Y)
 TERMS(LTLS,N,N,Y,N,Y,Y)
 TERMS(T3,N,Y,Y,Y,N,Y)
 TERMS(TEM1,N,Y,Y,Y,Y,Y)
 DIFCUT =0.5 ;ZDIFAC =1.
 GALA = F ;ADDDIF = F
 NEWENT = T
 ISOLX = -1 ;ISOLY = -1 ;ISOLZ = -1
 ************************************************************
  Group 9. Properties used if PRPS is not
  stored, and where PRPS = -1.0 if it is!
 RHO1 =1. ;TMP1 =0.
 EL1 = GRND1
 TSURR =0. ;TEMP0 =0.
 PRESS0 =0.
 DVO1DT =0. ;DRH1DP =0.
 EMISS =0. ;SCATT =0.
 RADIA =0. ;RADIB =0.
 EL1A =0. ;EL1B =1.
 EL1C =0.
 ENUL =1.0E-05 ;ENUT = GRND8
 ENUTA =0. ;ENUTB =0.
 ENUTC =0.
 IENUTA = 0
 PRNDTL(U1)=1. ;PRNDTL(V1)=1.
 PRNDTL(LTLS)=1. ;PRNDTL(T3)=1.
 PRNDTL(TEM1)=1.
 PRT(U1)=1. ;PRT(V1)=1.
 PRT(LTLS)=1. ;PRT(T3)=1.
 PRT(TEM1)=1.
 CP1 =1. ;CP2 =1.
 ************************************************************
  Group 10.Inter-Phase Transfer Processes
 ************************************************************
  Group 11.Initial field variables (PHIs)
 FIINIT(P1)=1.0E-10 ;FIINIT(U1)=0.
 FIINIT(V1)=0. ;FIINIT(LTLS)=1.0E-10
 FIINIT(STRZ)=0. ;FIINIT(STRY)=0.
 FIINIT(STRX)=0. ;FIINIT(EPSZ)=0.
 FIINIT(EPSY)=0. ;FIINIT(EPSX)=0.
 FIINIT(EPST)=0. ;FIINIT(RHO1)=1.0E-10
 FIINIT(QRY)=1.0E-10 ;FIINIT(QRX)=1.0E-10
 FIINIT(SCAT)=0. ;FIINIT(EMIS)=0.
 FIINIT(DVO1)=1.0E-10 ;FIINIT(DRH1)=1.0E-10
 FIINIT(VISL)=1.0E-10 ;FIINIT(WGAP)=1.0E-10
 FIINIT(WDIS)=2.4E-03 ;FIINIT(PRPS)=0.
 FIINIT(ENUT)=1.0E-10 ;FIINIT(T3)=80.
 FIINIT(TEM1)=20.
 
 PATCH(BLOCK1 ,INIVAL, 1, 24, 13, 24, 1, 1, 1, 1)
 INIT(BLOCK1 ,EMIS,0. ,0.9 )
 INIT(BLOCK1 ,PRPS,0. ,103. )
 
 PATCH(BLOCK2 ,INIVAL, 49, 72, 13, 24, 1, 1, 1, 1)
 INIT(BLOCK2 ,EMIS,0. ,0.9 )
 INIT(BLOCK2 ,PRPS,0. ,103. )
 
 PATCH(BASE ,INIVAL, 1, 72, 1, 12, 1, 1, 1, 1)
 INIT(BASE ,EMIS,0. ,0.9 )
 INIT(BASE ,PRPS,0. ,100. )
 INIADD = F
 FSWEEP = 1
 NAMFI =CHAM
 ************************************************************
  Group 12. Patchwise adjustment of terms
  Patches for this group are printed with those
  for Group 13.
  Their names begin either with GP12 or &
 ************************************************************
  Group 13. Boundary & Special Sources
 
 PATCH(INLET ,NORTH , 1, 6, 36, 36, 1, 1, 1, 1)
 COVAL(INLET ,P1 , FIXFLU ,1.486399 )
 COVAL(INLET ,V1 ,0. ,-1.250125 )
 COVAL(INLET ,TEM1,0. ,20. )
 
 PATCH(OUTLET ,EAST , 72, 72, 25, 36, 1, 1, 1, 1)
 COVAL(OUTLET ,P1 ,1.0E+05 ,0. )
 COVAL(OUTLET ,U1 ,0. ,0. )
 COVAL(OUTLET ,V1 ,0. ,0. )
 COVAL(OUTLET ,TEM1,0. , SAME )
 
 PATCH(TOP ,NWALL , 7, 72, 36, 36, 1, 1, 1, 1)
 COVAL(TOP ,U1 ,1. ,0. )
 COVAL(TOP ,TEM1, FIXVAL ,80. )
 
 PATCH(IMSWL1 ,NWALL , 1, 72, 36, 36, 1, 1, 1, 1)
 COVAL(IMSWL1 ,T3 , GRND4 ,80. )
 COVAL(IMSWL1 ,TEM1, GRND2 ,80. )
 
 PATCH(WESTFIX ,WEST , 1, 1, 1, 24, 1, 1, 1, 1)
 COVAL(WESTFIX ,U1 ,In-Form:source - see Grp 19)
 
 PATCH(EASTFIX ,EAST , 71, 71, 1, 24, 1, 1, 1, 1)
 COVAL(EASTFIX ,U1 ,In-Form:source - see Grp 19)
 
 PATCH(SOUTHFIX,SOUTH , 1, 72, 1, 1, 1, 1, 1, 1)
 COVAL(SOUTHFIX,V1 ,In-Form:source - see Grp 19)
 XCYCLE = F
 EGWF = T
 WALLCO = GRND2
 ************************************************************
  Group 14. Downstream Pressure For PARAB
 ************************************************************
  Group 15. Terminate Sweeps
 LSWEEP = 1000 ;ISWC1 = 1
 LITHYD = 1 ;LITFLX = 1 ;LITC = 1 ;ITHC1 = 1
 SELREF = T
 RESFAC =0.1
 ************************************************************
  Group 16. Terminate Iterations
 LITER(P1)=20 ;LITER(U1)=100
 LITER(V1)=100 ;LITER(LTLS)=20
 LITER(T3)=100 ;LITER(TEM1)=100
 ENDIT(P1)=1.0E-03 ;ENDIT(U1)=1.0E-03
 ENDIT(V1)=1.0E-03 ;ENDIT(LTLS)=1.0E-03
 ENDIT(T3)=1.0E-03 ;ENDIT(TEM1)=1.0E-03
 ************************************************************
  Group 17. Relaxation
 RELAX(P1,LINRLX,1.)
 RELAX(U1,FALSDT,1.0E-03)
 RELAX(V1,FALSDT,1.0E-03)
 RELAX(LTLS,FALSDT,1.0E+09)
 RELAX(STRZ,LINRLX,1.)
 RELAX(STRY,LINRLX,1.)
 RELAX(STRX,LINRLX,1.)
 RELAX(EPSZ,LINRLX,1.)
 RELAX(EPSY,LINRLX,1.)
 RELAX(EPSX,LINRLX,1.)
 RELAX(EPST,LINRLX,1.)
 RELAX(RHO1,LINRLX,1.)
 RELAX(QRY,LINRLX,1.)
 RELAX(QRX,LINRLX,1.)
 RELAX(SCAT,LINRLX,1.)
 RELAX(EMIS,LINRLX,1.)
 RELAX(DVO1,LINRLX,1.)
 RELAX(DRH1,LINRLX,1.)
 RELAX(VISL,LINRLX,1.)
 RELAX(WGAP,LINRLX,1.)
 RELAX(WDIS,LINRLX,1.)
 RELAX(PRPS,LINRLX,1.)
 RELAX(ENUT,LINRLX,1.)
 RELAX(T3,FALSDT,1.0E+09)
 RELAX(TEM1,FALSDT,1.0E+09)
 OVRRLX =0.
 EXPERT = F ;NNORSL = F
 ************************************************************
  Group 18. Limits
 VARMAX(P1)=1.0E+10 ;VARMIN(P1)=-1.0E+10
 VARMAX(U1)=1.0E+06 ;VARMIN(U1)=-1.0E+06
 VARMAX(V1)=1.0E+06 ;VARMIN(V1)=-1.0E+06
 VARMAX(LTLS)=1.0E+10 ;VARMIN(LTLS)=-1.0E+10
 VARMAX(STRZ)=1.0E+10 ;VARMIN(STRZ)=-1.0E+10
 VARMAX(STRY)=1.0E+10 ;VARMIN(STRY)=-1.0E+10
 VARMAX(STRX)=1.0E+10 ;VARMIN(STRX)=-1.0E+10
 VARMAX(EPSZ)=1.0E+10 ;VARMIN(EPSZ)=-1.0E+10
 VARMAX(EPSY)=1.0E+10 ;VARMIN(EPSY)=-1.0E+10
 VARMAX(EPSX)=1.0E+10 ;VARMIN(EPSX)=-1.0E+10
 VARMAX(EPST)=1.0E+10 ;VARMIN(EPST)=-1.0E+10
 VARMAX(RHO1)=1.0E+10 ;VARMIN(RHO1)=-1.0E+10
 VARMAX(QRY)=1.0E+10 ;VARMIN(QRY)=-1.0E+10
 VARMAX(QRX)=1.0E+10 ;VARMIN(QRX)=-1.0E+10
 VARMAX(SCAT)=1.0E+10 ;VARMIN(SCAT)=-1.0E+10
 VARMAX(EMIS)=1.0E+10 ;VARMIN(EMIS)=-1.0E+10
 VARMAX(DVO1)=1.0E+10 ;VARMIN(DVO1)=-1.0E+10
 VARMAX(DRH1)=1.0E+10 ;VARMIN(DRH1)=-1.0E+10
 VARMAX(VISL)=1.0E+10 ;VARMIN(VISL)=-1.0E+10
 VARMAX(WGAP)=1.0E+10 ;VARMIN(WGAP)=-1.0E+10
 VARMAX(WDIS)=1.0E+10 ;VARMIN(WDIS)=-1.0E+10
 VARMAX(PRPS)=1.0E+10 ;VARMIN(PRPS)=-1.0E+10
 VARMAX(ENUT)=1.0E+10 ;VARMIN(ENUT)=-1.0E+10
 VARMAX(T3)=1.0E+10 ;VARMIN(T3)=-1.0E+10
 VARMAX(TEM1)=1.0E+10 ;VARMIN(TEM1)=-1.0E+10
 ************************************************************
  Group 19. Data transmitted to GROUND
 GENK = T
 STRA = T
 PARSOL = F
 CONWIZ = T
 ISKINA = 5 ;ISKINB = 4
 ISG50 = 1
 ISG52 = 2
 ISG62 = 1
 SPEDAT(SET,INITIAL,U1,C,=1.250125!IF(PRPS.EQ.0))
 SPEDAT(SET,EMISSIVITY,OFIMSWL1,R,1.)
 SPEDAT(SET,SOURCE,U1!WESTFIX,C,=-U1*DRH1/DXU!LINE)
 SPEDAT(SET,SOURCE,U1!EASTFIX,C,=-U1*DRH1/DXU!LINE)
 SPEDAT(SET,SOURCE,V1!SOUTHFIX,C,=-V1*DRH1/DYV!LINE)
 SPEDAT(SET,RLXFAC,REFTEMP,R,80.)
 SPEDAT(SET,RLXFAC,REFLEN,R,0.03)
 SPEDAT(SET,LONGNAME,P1,C,pressure_or_const1*dilatation-const2*epst)
 SPEDAT(SET,LONGNAME,ENUL,C,viscosity_or_poisson)
 SPEDAT(SET,LONGNAME,DRH1,C,compressibility_or_Young's_modulus*1.e11)
 SPEDAT(SET,LONGNAME,U1,C,x-direction_velocity_or_displacement)
 SPEDAT(SET,LONGNAME,V1,C,y-direction_velocity_or_displacement)
 SPEDAT(SET,MATERIAL,0,L,T)
 SPEDAT(SET,MATERIAL,103,L,T)
 SPEDAT(SET,MATERIAL,100,L,T)
 ************************************************************
  Group 20. Preliminary Printout
 ************************************************************
  Group 21. Print-out of Variables
 INIFLD = F ;SUBWGR = F
    * Y in OUTPUT argument list denotes:
    * 1-field 2-correction-eq. monitor 3-selective dumping      
    * 4-whole-field residual 5-spot-value table 6-residual table
 OUTPUT(P1,Y,N,Y,Y,Y,Y)
 OUTPUT(U1,Y,N,Y,Y,Y,Y)
 OUTPUT(V1,Y,N,Y,Y,Y,Y)
 OUTPUT(LTLS,Y,N,Y,Y,Y,Y)
 OUTPUT(STRZ,N,N,N,N,N,N)
 OUTPUT(STRY,Y,N,Y,N,N,N)
 OUTPUT(STRX,Y,N,Y,N,N,N)
 OUTPUT(EPSZ,N,N,N,N,N,N)
 OUTPUT(EPSY,Y,N,Y,N,N,N)
 OUTPUT(EPSX,Y,N,Y,N,N,N)
 OUTPUT(EPST,Y,N,Y,N,N,N)
 OUTPUT(RHO1,Y,N,Y,N,N,N)
 OUTPUT(QRY,Y,N,Y,N,N,N)
 OUTPUT(QRX,Y,N,Y,N,N,N)
 OUTPUT(SCAT,Y,N,Y,N,N,N)
 OUTPUT(EMIS,Y,N,Y,N,N,N)
 OUTPUT(DVO1,Y,N,Y,N,N,N)
 OUTPUT(DRH1,Y,N,Y,N,N,N)
 OUTPUT(VISL,Y,N,Y,N,N,N)
 OUTPUT(WGAP,Y,N,Y,N,N,N)
 OUTPUT(WDIS,Y,N,Y,N,N,N)
 OUTPUT(PRPS,Y,N,Y,N,N,N)
 OUTPUT(ENUT,Y,N,Y,N,N,N)
 OUTPUT(T3,Y,N,Y,Y,Y,Y)
 OUTPUT(TEM1,Y,N,Y,Y,Y,Y)
 ************************************************************
  Group 22. Monitor Print-Out
 IXMON = -1 ;IYMON = 1 ;IZMON = 1
 NPRMON = 100000 ;NPRMNT = 1 ;TSTSWP = -1
 UWATCH = T ;USTEER = T
 HIGHLO = F
 ************************************************************
  Group 23.Field Print-Out & Plot Control
 NPRINT = 100000 ;NUMCLS = 5
 NXPRIN = -1 ;IXPRF = 1 ;IXPRL = 10000
 NYPRIN = -1 ;IYPRF = 1 ;IYPRL = 10000
 IPLTF = 1 ;IPLTL = -1 ;NPLT = -1
 ISWPRF = 1 ;ISWPRL = 100000
 ITABL = 3 ;IPROF = 1
 ABSIZ =0.5 ;ORSIZ =0.4
 NTZPRF = 1 ;NCOLPF = 50
 ICHR = 2 ;NCOLCO = 45 ;NROWCO = 20
   No PATCHes yet used for this Group
 ************************************************************
  Group 24. Dumps For Restarts
 SAVE = T ;NOWIPE = F
 NSAVE =CHAM
STOP