```
TALK=T;RUN(1,1)
DISPLAY

A cubical solid with a numerical grid of nx=1, ny=1, nz=1,
is heated to 100 degrees above its initial temperature,
under four different conditions of constraint, viz:
1. it can expand freely in all directions
2. its high-z and low-z ends are fixed, but it can expand
freely in the x- and y-directions
3. its high-z and low-z ends are fixed, but it can expand
freely in the x-direction only.
4. it is prevented from expanding in the x-, y- and z directions.

The textbook values for the stresses and strains are computed
and printed, for comparison with thuse resulting from the solution
for w1.

ENDDIS
************************************************************
Group 1. Run Title and Number
************************************************************
************************************************************

TEXT(THERMal stress in a cube                )

************************************************************
************************************************************

IRUNN = 1 ;LIBREF = 0
************************************************************
Group 2. Time dependence
************************************************************
Group 3. X-Direction Grid Spacing
CARTES = T
NX = 1
XULAST =1.
XFRAC(1)=1.
************************************************************
Group 4. Y-Direction Grid Spacing
NY = 1
YVLAST =1.
YFRAC(1)=1.
************************************************************
Group 5. Z-Direction Grid Spacing
PARAB = F
NZ = 10
ZWLAST =12.
ZFRAC(1)=0.1 ;ZFRAC(2)=0.2
ZFRAC(3)=0.3 ;ZFRAC(4)=0.4
ZFRAC(5)=0.5 ;ZFRAC(6)=0.6
ZFRAC(7)=0.7 ;ZFRAC(8)=0.8
ZFRAC(9)=0.9 ;ZFRAC(10)=1.
************************************************************
Group 6. Body-Fitted Coordinates
************************************************************
Group 7. Variables: STOREd,SOLVEd,NAMEd
ONEPHS = T
NAME(1)=P1 ;NAME(7)=W1
NAME(130)=ETTH ;NAME(131)=EPST
NAME(132)=EZTH ;NAME(133)=EPSZ
NAME(134)=EYTH ;NAME(135)=EPSY
NAME(136)=EXTH ;NAME(137)=EPSX
NAME(138)=SZTH ;NAME(139)=STRZ
NAME(140)=SYTH ;NAME(141)=STRY
NAME(142)=SXTH ;NAME(143)=STRX
NAME(144)=PTH ;NAME(145)=DRH1
NAME(146)=DVO1 ;NAME(147)=ENUL
NAME(148)=DEN1 ;NAME(149)=PRPS
NAME(150)=TEM1
* Y in SOLUTN argument list denotes:
* 1-stored 2-solved 3-whole-field
* 4-point-by-point 5-explicit 6-harmonic averaging
SOLUTN(P1,Y,Y,N,N,N,Y)
SOLUTN(W1,Y,Y,N,N,N,Y)
SOLUTN(ETTH,Y,N,N,N,N,Y)
SOLUTN(EPST,Y,N,N,N,N,Y)
SOLUTN(EZTH,Y,N,N,N,N,Y)
SOLUTN(EPSZ,Y,N,N,N,N,Y)
SOLUTN(EYTH,Y,N,N,N,N,Y)
SOLUTN(EPSY,Y,N,N,N,N,Y)
SOLUTN(EXTH,Y,N,N,N,N,Y)
SOLUTN(EPSX,Y,N,N,N,N,Y)
SOLUTN(SZTH,Y,N,N,N,N,Y)
SOLUTN(STRZ,Y,N,N,N,N,Y)
SOLUTN(SYTH,Y,N,N,N,N,Y)
SOLUTN(STRY,Y,N,N,N,N,Y)
SOLUTN(SXTH,Y,N,N,N,N,Y)
SOLUTN(STRX,Y,N,N,N,N,Y)
SOLUTN(PTH,Y,N,N,N,N,Y)
SOLUTN(DRH1,Y,N,N,N,N,Y)
SOLUTN(DVO1,Y,N,N,N,N,Y)
SOLUTN(ENUL,Y,N,N,N,N,Y)
SOLUTN(DEN1,Y,N,N,N,N,Y)
SOLUTN(PRPS,Y,N,N,N,N,Y)
SOLUTN(TEM1,Y,Y,N,N,N,Y)
DEN1 = 148
VISL = 147
PRPS = 149
************************************************************
Group 8. Terms & Devices
* Y in TERMS argument list denotes:
* 1-built-in source 2-convection 3-diffusion 4-transient
* 5-first phase variable 6-interphase transport
TERMS(P1,Y,Y,Y,N,Y,Y)
TERMS(W1,Y,Y,Y,Y,Y,Y)
TERMS(TEM1,N,Y,Y,Y,Y,Y)
DIFCUT =0.5 ;ZDIFAC =1.
GALA = F ;ADDDIF = F
ISOLX = -1 ;ISOLY = -1 ;ISOLZ = -1
************************************************************
Group 9. Properties used if PRPS is not
stored, and where PRPS = -1.0 if it is!
RHO1 =1. ;TMP1 =0.
EL1 =0.
TSURR =0. ;TEMP0 =0.
PRESS0 =0.
DVO1DT =0. ;DRH1DP =0.
EMISS =0. ;SCATT =0.
ENUL =1.0E-05 ;ENUT =0.
PRNDTL(W1)=1. ;PRNDTL(TEM1)=1.
PRT(W1)=1. ;PRT(TEM1)=1.
CP1 =1. ;CP2 =1.
*  List of user-defined materials to be read by EARTH
MATFLG=T;IMAT=1
*  Name
*Ind. Dens.  Viscos.  Spec.heat  Conduct.  Expans.  Compr.
*
160 7800.0 0.3 473.0 43.0 1.E-5 0.5E-11
************************************************************
Group 10.Inter-Phase Transfer Processes
************************************************************
Group 11.Initial field variables (PHIs)
FIINIT(P1)=0. ;FIINIT(W1)=0.
FIINIT(ETTH)=-1.234E-11 ;FIINIT(EPST)=-1.234E-11
FIINIT(EZTH)=-1.234E-11 ;FIINIT(EPSZ)=1.0E-10
FIINIT(EYTH)=-1.234E-11 ;FIINIT(EPSY)=1.0E-10
FIINIT(EXTH)=-1.234E-11 ;FIINIT(EPSX)=1.0E-10
FIINIT(SZTH)=-1.234E-11 ;FIINIT(STRZ)=1.0E-10
FIINIT(SYTH)=-1.234E-11 ;FIINIT(STRY)=1.0E-10
FIINIT(SXTH)=-1.234E-11 ;FIINIT(STRX)=1.0E-10
FIINIT(PTH)=1.0E-10 ;FIINIT(DRH1)=1.0E-10
FIINIT(DVO1)=1.0E-10 ;FIINIT(ENUL)=1.0E-10
FIINIT(DEN1)=1.0E-10 ;FIINIT(PRPS)=0.
FIINIT(TEM1)=1.0E-10

PATCH(BLOCK ,INIVAL, 1, 1, 1, 1, 2, 9, 1, 1)
INIT(BLOCK ,PRPS, FIXVAL ,160. )
FSWEEP = 1
NAMFI =CHAM
************************************************************
Group 12. Patchwise adjustment of terms
Patches for this group are printed with those
for Group 13.
Their names begin either with GP12 or &
************************************************************
Group 13. Boundary & Special Sources

PATCH(LOW ,HIGH , 1, 1, 1, 1, 1, 1, 1, 1)
COVAL(LOW ,W1 , FIXVAL ,0. )

PATCH(HIGH ,HIGH , 1, 1, 1, 1, 9, 9, 1, 1)
COVAL(HIGH ,W1 , FIXVAL ,0. )

PATCH(TBLOCK ,VOLUME, 1, 1, 1, 1, 2, 9, 1, 1)
COVAL(TBLOCK ,TEM1, FIXVAL ,100. )
XCYCLE = F
EGWF = T
WALLCO = GRND2
************************************************************
Group 14. Downstream Pressure For PARAB
************************************************************
Group 15. Terminate Sweeps
LSWEEP = 200 ;ISWC1 = 1
LITHYD = 1 ;LITFLX = 1 ;LITC = 1 ;ITHC1 = 1
SELREF = T
RESFAC =1.0E-04
************************************************************
Group 16. Terminate Iterations
LITER(P1)=20 ;LITER(W1)=10
LITER(TEM1)=20
ENDIT(P1)=1.0E-03 ;ENDIT(W1)=1.0E-03
ENDIT(TEM1)=1.0E-03
************************************************************
Group 17. Relaxation
RELAX(P1,LINRLX,1.)
RELAX(W1,FALSDT,1.)
RELAX(ETTH,LINRLX,1.)
RELAX(EPST,LINRLX,1.)
RELAX(EZTH,LINRLX,1.)
RELAX(EPSZ,LINRLX,1.)
RELAX(EYTH,LINRLX,1.)
RELAX(EPSY,LINRLX,1.)
RELAX(EXTH,LINRLX,1.)
RELAX(EPSX,LINRLX,1.)
RELAX(SZTH,LINRLX,1.)
RELAX(STRZ,LINRLX,1.)
RELAX(SYTH,LINRLX,1.)
RELAX(STRY,LINRLX,1.)
RELAX(SXTH,LINRLX,1.)
RELAX(STRX,LINRLX,1.)
RELAX(PTH,LINRLX,1.)
RELAX(DRH1,LINRLX,1.)
RELAX(DVO1,LINRLX,1.)
RELAX(ENUL,LINRLX,1.)
RELAX(DEN1,LINRLX,1.)
RELAX(PRPS,LINRLX,1.)
RELAX(TEM1,FALSDT,1.0E+09)
OVRRLX =0.
EXPERT = F ;NNORSL = F
************************************************************
Group 18. Limits
VARMAX(P1)=1.0E+10 ;VARMIN(P1)=-1.0E+10
VARMAX(W1)=1.0E+06 ;VARMIN(W1)=-1.0E+06
VARMAX(ETTH)=1.0E+10 ;VARMIN(ETTH)=-1.0E+10
VARMAX(EPST)=1.0E+10 ;VARMIN(EPST)=-1.0E+10
VARMAX(EZTH)=1.0E+10 ;VARMIN(EZTH)=-1.0E+10
VARMAX(EPSZ)=1.0E+10 ;VARMIN(EPSZ)=-1.0E+10
VARMAX(EYTH)=1.0E+10 ;VARMIN(EYTH)=-1.0E+10
VARMAX(EPSY)=1.0E+10 ;VARMIN(EPSY)=-1.0E+10
VARMAX(EXTH)=1.0E+10 ;VARMIN(EXTH)=-1.0E+10
VARMAX(EPSX)=1.0E+10 ;VARMIN(EPSX)=-1.0E+10
VARMAX(SZTH)=1.0E+10 ;VARMIN(SZTH)=-1.0E+10
VARMAX(STRZ)=1.0E+10 ;VARMIN(STRZ)=-1.0E+10
VARMAX(SYTH)=1.0E+10 ;VARMIN(SYTH)=-1.0E+10
VARMAX(STRY)=1.0E+10 ;VARMIN(STRY)=-1.0E+10
VARMAX(SXTH)=1.0E+10 ;VARMIN(SXTH)=-1.0E+10
VARMAX(STRX)=1.0E+10 ;VARMIN(STRX)=-1.0E+10
VARMAX(PTH)=1.0E+10 ;VARMIN(PTH)=-1.0E+10
VARMAX(DRH1)=1.0E+10 ;VARMIN(DRH1)=-1.0E+10
VARMAX(DVO1)=1.0E+10 ;VARMIN(DVO1)=-1.0E+10
VARMAX(ENUL)=1.0E+10 ;VARMIN(ENUL)=-1.0E+10
VARMAX(DEN1)=1.0E+10 ;VARMIN(DEN1)=-1.0E+10
VARMAX(PRPS)=1.0E+10 ;VARMIN(PRPS)=-1.0E+10
VARMAX(TEM1)=1.0E+10 ;VARMIN(TEM1)=-1.0E+10
************************************************************
Group 19. Data transmitted to GROUND
STRA = T
PARSOL = F
CONWIZ = T
ISG21 = 200
ISG50 = 1
ISG52 = 2
ISG62 = 1
CSG10   ='Q1'
SPEDAT(SET,STORED,SXTH,C,=0.!IMAT>100!ZSLFIN)
SPEDAT(SET,STORED,SYTH,C,=-2.857143E+08!IMAT>100!ZSLFIN)
SPEDAT(SET,STORED,SZTH,C,=-2.857143E+08!IMAT>100!ZSLFIN)
SPEDAT(SET,STORED,EXTH,C,=1.857143E-03!IMAT>100!ZSLFIN)
SPEDAT(SET,STORED,EYTH,C,=0.!IMAT>100!ZSLFIN)
SPEDAT(SET,STORED,EZTH,C,=0.!IMAT>100!ZSLFIN)
SPEDAT(SET,STORED,ETTH,C,=9.999999E-04!IMAT>100!ZSLFIN)
SPEDAT(SET,STORED,PTH,C,=1.857143E-03!ZSLFIN)
SPEDAT(SET,RLXFAC,RLXU1D,R,1.)
SPEDAT(SET,BOUNDARY,YCONST,R,1.0E+20)
SPEDAT(SET,MATERIAL,0,L,T)
SPEDAT(SET,MATERIAL,160,L,T)
************************************************************
Group 20. Preliminary Printout
************************************************************
Group 21. Print-out of Variables
INIFLD = F ;SUBWGR = F
* Y in OUTPUT argument list denotes:
* 1-field 2-correction-eq. monitor 3-selective dumping
* 4-whole-field residual 5-spot-value table 6-residual table
OUTPUT(P1,Y,N,Y,Y,Y,Y)
OUTPUT(W1,Y,N,Y,Y,Y,Y)
OUTPUT(ETTH,Y,N,Y,N,N,N)
OUTPUT(EPST,Y,N,Y,N,N,N)
OUTPUT(EZTH,Y,N,Y,N,N,N)
OUTPUT(EPSZ,Y,N,Y,N,N,N)
OUTPUT(EYTH,Y,N,Y,N,N,N)
OUTPUT(EPSY,Y,N,Y,N,N,N)
OUTPUT(EXTH,Y,N,Y,N,N,N)
OUTPUT(EPSX,Y,N,Y,N,N,N)
OUTPUT(SZTH,Y,N,Y,N,N,N)
OUTPUT(STRZ,Y,N,Y,N,N,N)
OUTPUT(SYTH,Y,N,Y,N,N,N)
OUTPUT(STRY,Y,N,Y,N,N,N)
OUTPUT(SXTH,Y,N,Y,N,N,N)
OUTPUT(STRX,Y,N,Y,N,N,N)
OUTPUT(PTH,Y,N,Y,N,N,N)
OUTPUT(DRH1,Y,N,Y,N,N,N)
OUTPUT(DVO1,Y,N,Y,N,N,N)
OUTPUT(ENUL,Y,N,Y,N,N,N)
OUTPUT(DEN1,Y,N,Y,N,N,N)
OUTPUT(PRPS,Y,N,Y,N,N,N)
OUTPUT(TEM1,Y,N,Y,Y,Y,Y)
************************************************************
Group 22. Monitor Print-Out
IXMON = 1 ;IYMON = 1 ;IZMON = 1
NPRMON = 100000 ;NPRMNT = 1 ;TSTSWP = -1
UWATCH = T ;USTEER = T
HIGHLO = F
************************************************************
Group 23.Field Print-Out & Plot Control
NPRINT = 100000 ;NUMCLS = 5
NZPRIN = -1 ;IZPRF = 1 ;IZPRL = 10000
XZPR = F ;YZPR = F
IPLTF = 1 ;IPLTL = -1 ;NPLT = -1
ISWPRF = 1 ;ISWPRL = 100000
ITABL = 3 ;IPROF = 1
ABSIZ =0.5 ;ORSIZ =0.4
NTZPRF = 1 ;NCOLPF = 50
ICHR = 2 ;NCOLCO = 45 ;NROWCO = 20
No PATCHes yet used for this Group
************************************************************
Group 24. Dumps For Restarts
SAVE = T ;NOWIPE = F
NSAVE =CHAM
STOP
```