TALK=F;RUN( 1, 1)
 
 ************************************************************
   Q1 created by VDI menu, Version 2007, Date 16/01/07
 CPVNAM=VDI;SPPNAM=Core
 ************************************************************
  Echo DISPLAY / USE settings
  DISPLAY
  A cubical block is subjected to x-direction tension, under 
  three possible lateral-constraint conditions:
  1. no constraint
  2. lateral displacement in y and z directions prevented 
  3. lateral displacement prevented only in y direction
  
  Because the x-direction displacements depend only on x, NY and NZ, 
  the number of x- and z-direction intervals, are both set to 1.
  
 
  Variables which may be altered by hand-editing include:
  * grid-fineness NX ; Poisson's Ratio POISSON ; 
  * Young's Modulus YOUNG ; applied stress APPSTR
  * block dimensions XULAST, YVLAST, ZWLAST
  * grid-uniformity POWER (in GRDPWR)

  ENDDIS
 ************************************************************
 IRUNN   =         1 ;LIBREF =       501
 ************************************************************
  Group 1. Run Title
 TEXT(Cube in x-direction tension; S501 )
 ************************************************************
  Group 2. Transience
 STEADY  =    T
 ************************************************************
  Groups 3, 4, 5  Grid Information
    * Overall number of cells, RSET(M,NX,NY,NZ,tolerance)
 RSET(M,16,1,1,1.000000E-05)
 ************************************************************
  Group 6. Body-Fitted coordinates
 ************************************************************
  Group 7. Variables: STOREd,SOLVEd,NAMEd
 ONEPHS  =    T
    * Non-default variable names
    * Solved variables list
 SOLVE(DISX)
    * Stored variables list
 STORE(PRPS,DEN1,ENUL,DVO1,DRH1)
 STORE(STRX,STRY,STRZ,EPSX,EPSY,EPSZ)
 STORE(U1T,U1/T)
 
 ************************************************************
  Echo InForm settings for Group  7
  inform7begin
 
  ***** SELECT CASENO ******
 integer(caseno)
    caseno = 1 :x-direction tension, y & z free
    caseno = 2 :  ditto            , y & z fixed
    caseno = 3 :  ditto            , y fixed, z free
 
 caseno=1
  ***** CASENO ******
 
real(CEPSX)
REAL(FX,POISSON,YOUNG)
YOUNG   = 1/0.5E-11   ! Young's modulus used for exact solutions
POISSON=0.3           ! Poisson's ratio used for exact solutions
                      ! The above must correspond to the data
                      ! below MATFLG

FX= 40.0e6  ! H/m^2 = 40 N/mm^2
IF(CASENO.EQ.1) THEN
 CEPSX =  FX/YOUNG
ENDIF
IF(CASENO.EQ.2) THEN
 CEPSX =  FX/YOUNG*(1+POISSON)*(1-2*POISSON)/(1-POISSON)    
ENDIF
IF(CASENO.EQ.3) THEN
 CEPSX = FX/YOUNG*(1+POISSON)*(1-POISSON)
ENDIF
(STORED VAR U1T IS :CEPSX:*XG)
 
(STORED VAR U1/T IS DISX/(U1T+1.e-20))

  inform7end
 ************************************************************
  Group 8. Terms & Devices
 ************************************************************
  Group 9. Properties
    * Domain material index is 160 signifying:
    * NOTSET
 SETPRPS(1,160,Q1)
 ENUT    = 0.000000E+00
 DRH1DP  = 5.000000E-12
 DVO1DT  = 1.000000E-05
   *  List of user-defined materials to be read by EARTH
    MATFLG=T;IMAT=1
   *  Name
   *Ind. Dens.  Viscos.  Spec.heat  Conduct.  Expans.  Compr.
   *  
    160 7800.0 0.3 473.0 43.0 1.0E-5 0.5E-11
 ************************************************************
  Group 10.Inter-Phase Transfer Processes
 ************************************************************
  Group 11.Initialise Var/Porosity Fields
 FIINIT(DISX) =  0.000000E+00
 FIINIT(U1/T) =  1.001000E-10
 FIINIT(U1T ) =  1.001000E-10
 FIINIT(EPSZ) =  1.001000E-10 ;FIINIT(EPSX) =  1.001000E-10
 FIINIT(EPSY) =  1.001000E-10 ;
 FIINIT(STRZ) =  1.001000E-10 ;FIINIT(STRY) =  1.001000E-10
 FIINIT(STRX) =  1.001000E-10 ;FIINIT(PRPS) =  1.600000E+02
 
 INIADD  =    F
 ************************************************************
  Echo InForm settings for Group 11
 ************************************************************
  Group 12. Convection and diffusion adjustments
   No PATCHes used for this Group
 ************************************************************
  Group 13. Boundary & Special Sources
 
 PATCH (FIX     ,WWALL ,1,0,0,0,0,0,1,1)
 COVAL (FIX     ,DISX, 1.000000E+00, 0.000000E+00)
 
 PATCH (FORC  ,EAST ,2,0,0,0,0,0,1,1)
 
 EGWF    =    T
 ************************************************************
  Echo InForm settings for Group 13
  inform13begin
(SOURCE of DISX at FORC is COVAL(FIXFLU,:FX:))
  inform13end
 ************************************************************
  Group 14. Downstream Pressure For PARAB
 ************************************************************
  Group 15. Terminate Sweeps
 LSWEEP  =       10
 RESFAC  = 1.000000E-07
 ************************************************************
  Group 16. Terminate Iterations
 ************************************************************
  Group 17. Relaxation
 ************************************************************
  Group 18. Limits
 ************************************************************
  Group 19. EARTH Calls To GROUND Station
 USEGRD  =    T  ;USEGRX =    T
 STRA    =    T
 ASAP    =    T
 PARSOL  =    F
 ISG21   =       400
 ISG50   =         1
 ISG52   =         1
 CSG10   ='q1'
 SPEDAT(SET,BOUNDARY,ZCONST,R,0.00000E+00)
 SPEDAT(SET,BOUNDARY,YCONST,R,0.00000E+00)
 ************************************************************
  Echo InForm settings for Group 19
  inform19begin
IF(CASENO.EQ.2) THEN
SPEDAT(BOUNDARY,YCONST,R,1.E20)  ! prevent y displacement
SPEDAT(BOUNDARY,ZCONST,R,1.E20)  ! prevent z displacement
ENDIF
IF(CASENO.EQ.3) THEN
SPEDAT(BOUNDARY,YCONST,R,1.E20)  ! prevent y displacement
ENDIF
  inform19end
 ************************************************************
  Group 20. Preliminary Printout
 ECHO    =    T
 ************************************************************
  Group 21. Print-out of Variables
 ************************************************************
  Group 22. Monitor Print-Out
 IXMON   =        14 ;IYMON  =         2 ;IZMON  =         1
 NPRMON  =    100000
 NPRMNT  =         1
 TSTSWP  =        -1
 ************************************************************
  Group 23.Field Print-Out & Plot Control
 NPRINT  =    100000
 NXPRIN  =         2
 NYPRIN  =         2
 ISWPRF  =         1 ;ISWPRL =    100000
   No PATCHes used for this Group
 ************************************************************
  Group 24. Dumps For Restarts
 
 GVIEW(P,0.000000E+00,0.000000E+00,1.000000E+00)
 GVIEW(UP,0.000000E+00,1.000000E+00,0.000000E+00)
 
> DOM,    SIZE,        9.000000E-02, 9.000000E-02, 1.000000E-03
> DOM,    MONIT,       7.593750E-02, 7.593750E-02, 5.000000E-04
> DOM,    SCALE,       1.000000E+00, 1.000000E+00, 1.000000E+00
> DOM,    SNAPSIZE,    1.000000E-02
  > GRID,   RSET_X_1,     16, 1.000000E+00
> GRID,   RSET_Y_1,      1, 1.000000E+00
  > GRID,   RSET_Z_1,      1, 1.000000E+00
 
> OBJ,    NAME,        FIX
> OBJ,    POSITION,    0.000000E+00, 0.000000E+00, 0.000000E+00
> OBJ,    SIZE,        0.000000E+00, 9.000000E-02, 1.000000E-03
> OBJ,    GEOMETRY,    default
> OBJ,    ROTATION24,        1
> OBJ,    TYPE,        USER_DEFINED
 
> OBJ,    NAME,        FORC
> OBJ,    POSITION,    9.000000E-02, 0.000000E+00, 0.000000E+00
> OBJ,    SIZE,        0.000000E+00, 9.000000E-02, 1.000000E-03
> OBJ,    GEOMETRY,    default
> OBJ,    ROTATION24,        1
> OBJ,    TYPE,        USER_DEFINED
 
 ************************************************************
STOP