```
TALK=F;RUN( 1, 1)

************************************************************
Q1 created by VDI menu, Version 2009, Date 17/02/09
CPVNAM=VDI;SPPNAM=Core
************************************************************
Echo DISPLAY / USE settings
DISPLAY
Thin cylinder with central hole in cartesian system
and TEM(R):
2) Plane-Stress 2d problem : STRZ=0
3) Temperature equation: TEM(R_I) = 10, TEM(R_O) = 0
4) Stress equation STRY(R_I) = STRY(R_O) = 0

The text-book solution may be found in section 151 of
Timoshenko.
ENDDIS
************************************************************
IRUNN = 1 ;LIBREF = 506
************************************************************
Group 1. Run Title
TEXT(USP: Cooled long cylinder               )
************************************************************
Group 2. Transience
************************************************************
Groups 3, 4, 5  Grid Information
* Overall number of cells, RSET(M,NX,NY,NZ,tolerance)
RSET(M,10,10,1,1.0E-05)
************************************************************
Group 6. Body-Fitted coordinates
************************************************************
Group 7. Variables: STOREd,SOLVEd,NAMEd
* Non-default variable names

* Solved variables list
SOLVE(DISY,DISX)
* Stored variables list
STORE(PRPS,STRX,STRY,STRZ,EPSY,EPSX,EPSZ,EPST)
STORE(DEN1,ENUL,DVO1,DRH1,V1TH,KOND,I_RG,DISR)
STORE(T1TH,TEM1)
SOLUTN(DISY,Y,Y,Y,N,N,Y)
SOLUTN(DISX,Y,Y,Y,N,N,Y)

************************************************************
Echo save-block settings for Group  7
SAVE7BEGIN

REAL(TII,TOO,R_I,R_O,POISSON,YOUNG,ALFAT)
TII=10.0 ! inner TEM1
TOO=0.0  ! outer TEM1

YOUNG   = 1/(0.5E-11) ! Young's modulus
POISSON=0.3           ! Poisson's ratio
ALFAT=1.0E-5
======================================
REAL(BSS)
BSS=R_O/R_I
BSS = LOG(BSS)

(STORED VAR V1/T IS DISR/V1TH WITH IMAT>100)

SPEDAT(BOUNDARY,ZCONST,R,0.0)         ! z contraction allowed

=============== VTH ====================
real(VSS,VS_1,VS_2,VS_3,I_B)
VSS = ALFAT*TII*(1+POISSON)/BSS
I_B = 0.25*(R_O**2-R_I**2) - 0.5*R_I**2*BSS
VS_1 = I_B*(1-POISSON)/(1+POISSON)/(R_O**2-R_I**2)
VS_2 = I_B*R_I**2/(R_O**2-R_I**2)
VS_3 = 0.5*R_I**2*(BSS+0.5)

char(RRR)
RRR=(SQRT(XG^2+YG^2))

(STORED VAR I_RG IS 0.5*:RRR:^2*(LOGE(:R_O:/:RRR:)+0.5)-:VS_3:)
(STORED VAR V1TH IS :VSS:/:RRR:*(I_RG + :VS_1:*:RRR:^2+:VS_2:))
(STORED VAR DISR IS SQRT(DISX^2+DISY^2))

real(TSS)
TSS = TII/BSS
(STORED VAR TEM1 IS :TSS:*LOGE(:R_O:/:RRR:)!SWPSTR)

SAVE7END
************************************************************
Group 8. Terms & Devices
USP = T ; USPDBG= F
UTCPLT = T ; USPIMB= F
UAUTO = T ; UGTGRD= F
USPVTK = T ; USPTER= F
USCANX = T ; USCANY= T
USCANZ = T
MXLEV = 0 ;MYLEV = 0 ;MZLEV = 0
DOMAT = -1
CELLST = 10 ; FACEST= 10
MINPRP = -1 ; MAXPRP= 250
UMXLEV = 3 ; UMXCLS= 10000
UNOLAY = 2 ; UIOLEV= 1
UWALEV = 2 ; UGRITR= 2
UMXCRS = 16
USPREL =0.7 ; UMNCEL=1.
UDVREL =1.
************************************************************
Group 9. Properties
* Domain material index is 198 signifying:
* Solid with smooth-wall friction
SETPRPS(1,198,Q1)
ENUT =0.
*  List of user-defined materials to be read by EARTH
MATFLG=T;IMAT=3
*  Name
*Ind. Dens.  Viscos.  Spec.heat  Conduct.  Expans.  Compr.
*
0 1.189 1.544E-05 1005.0 0.0258 3.41E-3 0.0
*
5 1.189 1.544E-05 1005.0 0.0258 3.41E-3 0.0
*
160 7800.0 0.3 473.0 0.0258 1.0E-5 0.5E-11
************************************************************
Group 10.Inter-Phase Transfer Processes
************************************************************
Group 11.Initialise Var/Porosity Fields
FIINIT(EPSZ)=1.001E-10 ;FIINIT(EPSX)=1.001E-10
FIINIT(EPSY)=1.001E-10 ;FIINIT(STRZ)=1.001E-10
FIINIT(STRY)=1.001E-10 ;FIINIT(STRX)=1.001E-10
FIINIT(PRPS)=198. ;FIINIT(DISY)=0.
FIINIT(DISX)=0.
No PATCHes used for this Group

************************************************************
Echo save-block settings for Group 11
SAVE11BEGIN

SAVE11END
************************************************************
Group 12. Convection and diffusion adjustments
No PATCHes used for this Group
************************************************************
Group 13. Boundary & Special Sources
No PATCHes used for this Group

EGWF = T
************************************************************
Echo save-block settings for Group 13
SAVE13BEGIN
(source of DISX at LEFT is COVAL(1,0)!VOLU)
(source of DISY at BOTTOM is COVAL(1,0)!VOLU)
SAVE13END
************************************************************
Echo save-block settings for Group 13
SAVE13BEGIN

SAVE13END
************************************************************
Group 14. Downstream Pressure For PARAB
************************************************************
Group 15. Terminate Sweeps
LSWEEP = 400
RESFAC =1.0E-07
************************************************************
Group 16. Terminate Iterations
************************************************************
Group 17. Relaxation
RELAX(DISY,LINRLX,1. )
RELAX(DISX,LINRLX,1. )
************************************************************
Group 18. Limits
************************************************************
Group 19. EARTH Calls To GROUND Station
STRA = T
PARSOL = F
ISG21 = 4500
ISG50 = 1
ISG52 = 3
CSG10   ='Q1'
SPEDAT(SET,BOUNDARY,ZCONST,R,1.0E+20)
************************************************************
Echo save-block settings for Group 19
SAVE19BEGIN

SAVE19END
************************************************************
Group 20. Preliminary Printout
************************************************************
Group 21. Print-out of Variables
************************************************************
Group 22. Monitor Print-Out
IXMON = 6 ;IYMON = 6 ;IZMON = 1
NPRMON = 100000
NPRMNT = 1
TSTSWP = -1
************************************************************
Group 23.Field Print-Out & Plot Control
NPRINT = 100000
ISWPRF = 1 ;ISWPRL = 100000
No PATCHes used for this Group
************************************************************
Group 24. Dumps For Restarts

GVIEW(P,5.939464E-03,-0.073532,0.997274)
GVIEW(UP,-0.472349,0.878814,0.067611)

> DOM,    SIZE,        8.000000E-01, 8.000000E-01, 2.000000E-01
> DOM,    MONIT,       4.400000E-01, 4.400000E-01, 1.000000E-01
> DOM,    SCALE,       1.000000E+00, 1.000000E+00, 1.000000E+00
> DOM,    INCREMENT,   1.000000E-02, 1.000000E-02, 1.000000E-03
> GRID,   RSET_X_1,     10, 1.000000E+00
> GRID,   RSET_Y_1,     10, 1.000000E+00
> GRID,   RSET_Z_1,      1, 1.000000E+00

> OBJ,    NAME,        LEFT
> OBJ,    POSITION,    0.000000E+00, 0.000000E+00, 0.000000E+00
> OBJ,    SIZE,        0.000000E+00, 8.000000E-01, 2.000000E-01
> OBJ,    GEOMETRY,    cube11
> OBJ,    TYPE,        PLATE

> OBJ,    NAME,        BOTTOM
> OBJ,    POSITION,    0.000000E+00, 0.000000E+00, 0.000000E+00
> OBJ,    SIZE,        8.000000E-01, 0.000000E+00, 2.000000E-01
> OBJ,    GEOMETRY,    cube11
> OBJ,    TYPE,        PLATE

> OBJ,    NAME,        BODY
> OBJ,    POSITION,    0.000000E+00, 0.000000E+00, 0.000000E+00
> OBJ,    SIZE,        8.000000E-01, 8.000000E-01, 2.000000E-01
> OBJ,    GEOMETRY,    quarter-cylinder
> OBJ,    GRID,        NO
> OBJ,    TYPE,        BLOCKAGE
> OBJ,    COLOR-MODE,  USER
> OBJ,    COLOR-VAL,   13
> OBJ,    MATERIAL,    160,NOTSET

> OBJ,    NAME,        INNER
> OBJ,    POSITION,    0.000000E+00, 0.000000E+00, 0.000000E+00
> OBJ,    SIZE,        2.000000E-01, 2.000000E-01, 2.000000E-01
> OBJ,    GEOMETRY,    quarter-cylinder
> OBJ,    VISIBLE,     NO
> OBJ,    GRID,        NO
> OBJ,    TYPE,        BLOCKAGE
> OBJ,    COLOR-MODE,  USER
> OBJ,    COLOR-VAL,   15
> OBJ,    MATERIAL,    198,Solid with smooth-wall friction
************************************************************
STOP

```