TALK=T;RUN(1,1)
  DISPLAY
  The case considered is the 1d solution of fully-developed
  turbulent flow in a plane closed channel at a Re=1.E5. The
  solution is performed by use of the single-slab solver which
  computes the pressure drop for the specified mass flow rate.

  Calculations are made with the high-Re forms of the k-e model,
  the Chen-Kim k-e model (the default run), the RNG k-e model,
  the Wilcox 1988 & 2008 k-W modelS, and the Menter Baseline
  & SST k-w models. For this case all models produce very similar
  results, and the comparison between measured and computed
  friction factors f and velocity-defect parameters vdp are
  given below:
                             f          vdp
    Data                   0.0156      2.32
    Standard k-e           0.0160      2.25
    Chen-Kim k-e           0.0157      2.27
    RNG k-e model          0.0154      2.5
    Wilcox 1988 k-w model  0.0166      2.0
    Wilcox 2008 k-w model  0.0161      2.09
    Menter k-w model       0.0166      2.0
    k-w SST model          0.0158      2.05

  where f=8.*(wstar/wbulk)**2 and and vdp=(wcl-wbulk)/wstar.

  ENDDIS
   AUTOPLOT USE
   file; phi 5

   cl; da 1 w1; col9 1
   msg        Velocity (W1) profile.  Press RETURN to continue
   pause
   clear;da 1 enut;   col9 1
   msg        Effective-viscosity profile. Press RETURN; e to end
   pause
   ENDUSE
 ************************************************************
  Group 1. Run Title and Number
 ************************************************************
 ************************************************************
 
 TEXT(CHEN-KIM K-E DEVELOPED CHANNEL FLOW:T101)
 
 ************************************************************
 ************************************************************
 
 IRUNN = 1 ;LIBREF = 14
 ************************************************************
  Group 2. Time dependence
 STEADY = T
 ************************************************************
  Group 3. X-Direction Grid Spacing
 CARTES = T
 NX = 1
 XULAST =1.
 XFRAC(1)=1.
 ************************************************************
  Group 4. Y-Direction Grid Spacing
 NY = 30
 YVLAST =0.05
 YFRAC(1)=0.06517 ;YFRAC(2)=0.113468
 YFRAC(3)=0.156945 ;YFRAC(4)=0.19756
 YFRAC(5)=0.236171 ;YFRAC(6)=0.273257
 YFRAC(7)=0.309121 ;YFRAC(8)=0.343972
 YFRAC(9)=0.377959 ;YFRAC(10)=0.411198
 YFRAC(11)=0.443777 ;YFRAC(12)=0.475769
 YFRAC(13)=0.507231 ;YFRAC(14)=0.538212
 YFRAC(15)=0.568753 ;YFRAC(16)=0.59889
 YFRAC(17)=0.628651 ;YFRAC(18)=0.658065
 YFRAC(19)=0.687153 ;YFRAC(20)=0.715937
 YFRAC(21)=0.744434 ;YFRAC(22)=0.772661
 YFRAC(23)=0.800632 ;YFRAC(24)=0.828361
 YFRAC(25)=0.85586 ;YFRAC(26)=0.88314
 YFRAC(27)=0.91021 ;YFRAC(28)=0.937081
 YFRAC(29)=0.963761 ;YFRAC(30)=1.
 ************************************************************
  Group 5. Z-Direction Grid Spacing
 PARAB = F
 NZ = 1
 ZWLAST =1.0E-02
 ZFRAC(1)=1.
 ************************************************************
  Group 6. Body-Fitted Coordinates
 ************************************************************
  Group 7. Variables: STOREd,SOLVEd,NAMEd
 ONEPHS = T
 NAME(7)=W1 ;NAME(12)=KE
 NAME(13)=EP ;NAME(145)=VDP
 NAME(146)=UTAU ;NAME(147)=FRIC
 NAME(148)=STRS ;NAME(149)=LEN1
 NAME(150)=ENUT
    * Y in SOLUTN argument list denotes:
    * 1-stored 2-solved 3-whole-field
    * 4-point-by-point 5-explicit 6-harmonic averaging 
 SOLUTN(W1,Y,Y,N,N,N,N)
 SOLUTN(KE,Y,Y,N,N,N,N)
 SOLUTN(EP,Y,Y,N,N,N,N)
 SOLUTN(VDP,Y,N,N,N,N,N)
 SOLUTN(UTAU,Y,N,N,N,N,N)
 SOLUTN(FRIC,Y,N,N,N,N,N)
 SOLUTN(STRS,Y,N,N,N,N,Y)
 SOLUTN(LEN1,Y,N,N,N,N,Y)
 SOLUTN(ENUT,Y,N,N,N,N,Y)
 VIST = 150
 LEN1 = 149
 ************************************************************
  Group 8. Terms & Devices
    * Y in TERMS argument list denotes:
    * 1-built-in source 2-convection 3-diffusion 4-transient
    * 5-first phase variable 6-interphase transport         
 TERMS(W1,N,N,Y,Y,Y,Y)
 TERMS(KE,N,N,Y,Y,Y,N)
 TERMS(EP,N,N,Y,Y,Y,N)
 DIFCUT =0.5 ;ZDIFAC =1.
 GALA = F ;ADDDIF = F
 NEWENT = T
 USOURC = T
 ISOLX = -1 ;ISOLY = -1 ;ISOLZ = -1
 ************************************************************
  Group 9. Properties used if PRPS is not
  stored, and where PRPS = -1.0 if it is!
 RHO1 =1. ;TMP1 =0. ;EL1 = GRND4
 TSURR =0. ;TEMP0 =0. ;PRESS0 =0.
 DVO1DT =0. ;DRH1DP =0.
 EMISS =0. ;SCATT =0.
 RADIA =0. ;RADIB =0.
 EL1A =0. ;EL1B =0. ;EL1C =0.
 ENUL =1.0E-06 ;ENUT = GRND3
 ENUTA =0. ;ENUTB =0. ;ENUTC =0.
 IENUTA = 2
 PRNDTL(W1)=1. ;PRNDTL(KE)=1.
 PRNDTL(EP)=1.
 PRT(W1)=1. ;PRT(KE)=0.75
 PRT(EP)=1.15
 CP1 =1. ;CP2 =1.
 ************************************************************
  Group 10.Inter-Phase Transfer Processes
 ************************************************************
  Group 11.Initial field variables (PHIs)
 FIINIT(W1)=1. ;FIINIT(KE)=3.898571E-03
 FIINIT(EP)=8.887575E-03 ;FIINIT(VDP)=1.0E-10
 FIINIT(UTAU)=1.0E-10 ;FIINIT(FRIC)=1.0E-10
 FIINIT(STRS)=1.0E-10 ;FIINIT(LEN1)=1.0E-10
 FIINIT(ENUT)=1.0E-10
   No PATCHes yet used for this Group
 INIADD = F
 FSWEEP = 1
 NAMFI =CHAM
 ************************************************************
  Group 12. Patchwise adjustment of terms
  Patches for this group are printed with those
  for Group 13.
  Their names begin either with GP12 or &
 ************************************************************
  Group 13. Boundary & Special Sources
 
 PATCH(KESOURCE,PHASEM, 0, 0, 0, 0, 0, 0, 1, 1)
 COVAL(KESOURCE,KE , GRND4 , GRND4 )
 COVAL(KESOURCE,EP , GRND4 , GRND4 )
 
 PATCH(KECHEN ,PHASEM, 0, 0, 0, 0, 0, 0, 1, 1)
 COVAL(KECHEN ,EP , FIXFLU , GRND4 )
 
 PATCH(WALLN ,NWALL , 1, 1, 30, 30, 1, 1, 1, 1)
 COVAL(WALLN ,W1 , GRND2 ,0. )
 COVAL(WALLN ,KE , GRND2 , GRND2 )
 COVAL(WALLN ,EP , GRND2 , GRND2 )
 
 PATCH(FDFW1DP ,VOLUME, 1, 1, 1, 30, 1, 1, 1, 1)
 COVAL(FDFW1DP ,W1 ,0.05 , GRND1 )
 XCYCLE = F
 EGWF = T
 WALLCO = GRND2
 ************************************************************
  Group 14. Downstream Pressure For PARAB
 ************************************************************
  Group 15. Terminate Sweeps
 LSWEEP = 30 ;ISWC1 = 1
 LITHYD = 10 ;LITFLX = 1 ;LITC = 1 ;ITHC1 = 1
 SELREF = T
 RESFAC =1.0E-05
 ************************************************************
  Group 16. Terminate Iterations
 LITER(W1)=10 ;LITER(KE)=20
 LITER(EP)=20
 ENDIT(W1)=1.0E-03 ;ENDIT(KE)=1.0E-03
 ENDIT(EP)=1.0E-03
 ************************************************************
  Group 17. Relaxation
 RELAX(W1,FALSDT,0.15)
 RELAX(KE,FALSDT,0.15)
 RELAX(EP,FALSDT,0.15)
 RELAX(VDP,LINRLX,1.)
 RELAX(UTAU,LINRLX,1.)
 RELAX(FRIC,LINRLX,1.)
 RELAX(STRS,LINRLX,1.)
 RELAX(LEN1,LINRLX,1.)
 RELAX(ENUT,LINRLX,1.)
 KELIN = 1
 OVRRLX =0.
 EXPERT = F ;NNORSL = F
 ************************************************************
  Group 18. Limits
 VARMAX(W1)=1.0E+06 ;VARMIN(W1)=1.0E-10
 VARMAX(KE)=1.0E+10 ;VARMIN(KE)=1.0E-10
 VARMAX(EP)=1.0E+10 ;VARMIN(EP)=1.0E-10
 VARMAX(VDP)=1.0E+10 ;VARMIN(VDP)=-1.0E+10
 VARMAX(UTAU)=1.0E+10 ;VARMIN(UTAU)=-1.0E+10
 VARMAX(FRIC)=1.0E+10 ;VARMIN(FRIC)=-1.0E+10
 VARMAX(STRS)=1.0E+10 ;VARMIN(STRS)=-1.0E+10
 VARMAX(LEN1)=1.0E+10 ;VARMIN(LEN1)=-1.0E+10
 VARMAX(ENUT)=1.0E+10 ;VARMIN(ENUT)=-1.0E+10
 ************************************************************
  Group 19. Data transmitted to GROUND
 GENK = T
 FDFSOL = T
 PARSOL = F
 IENUTA = 2
 ISG62 = 1
 SPEDAT(SET,STORED,FRIC,C,=8.*STRS/(1.*1.)!ZSLFIN)
 SPEDAT(SET,STORED,UTAU,C,=STRS^0.5!ZSLFIN)
 SPEDAT(SET,STORED,VDP,C,=(W1[&1&]-1.)/UTAU[&NY&]!ZSLFIN)
 SPEDAT(SET,MAKE,FFAC,C,=0.0)
 SPEDAT(SET,MAKE,USTAR,C,=0.0)
 SPEDAT(SET,MAKE,VDUS,C,=0.0)
 SPEDAT(SET,STORED,FFAC!WALLN,C,=FRIC!ZSLFIN)
 SPEDAT(SET,STORED,USTAR!WALLN,C,=UTAU!ZSLFIN)
 SPEDAT(SET,STORED,VDUS!WALLN,C,=VDP!ZSLFIN)
 SPEDAT(SET,PRINT,F,C,=FFAC)
 SPEDAT(SET,PRINT,U*,C,=USTAR)
 SPEDAT(SET,PRINT,(UCL-UB)/U*,C,=VDUS)
 SPEDAT(SET,GXMONI,PLOTALL,L,T)
 ************************************************************
  Group 20. Preliminary Printout
 DISTIL = T ;NULLPR = F
 NDST = 0
 DSTTOL =1.0E-02
 EX(W1)=0.987 ;EX(KE)=3.875E-03
 EX(EP)=0.02227 ;EX(VDP)=2.265
 EX(UTAU)=1.484E-03 ;EX(FRIC)=5.219E-04
 EX(STRS)=6.523E-05 ;EX(LEN1)=5.546E-03
 EX(ENUT)=1.682E-04
 ************************************************************
  Group 21. Print-out of Variables
 INIFLD = F ;SUBWGR = F
    * Y in OUTPUT argument list denotes:
    * 1-field 2-correction-eq. monitor 3-selective dumping      
    * 4-whole-field residual 5-spot-value table 6-residual table
 OUTPUT(W1,Y,N,Y,Y,Y,Y)
 OUTPUT(KE,Y,N,Y,Y,Y,Y)
 OUTPUT(EP,Y,N,Y,Y,Y,Y)
 OUTPUT(VDP,Y,N,Y,N,N,N)
 OUTPUT(UTAU,Y,N,Y,N,N,N)
 OUTPUT(FRIC,Y,N,Y,N,N,N)
 OUTPUT(STRS,Y,N,Y,N,N,N)
 OUTPUT(LEN1,Y,N,Y,N,N,N)
 OUTPUT(ENUT,Y,N,Y,N,N,N)
 WALPRN = T
 ************************************************************
  Group 22. Monitor Print-Out
 IXMON = 1 ;IYMON = 2 ;IZMON = 1
 NPRMON = 100000 ;NPRMNT = 1 ;TSTSWP = -1
 UWATCH = T ;USTEER = T
 HIGHLO = F
 ************************************************************
  Group 23.Field Print-Out & Plot Control
 NPRINT = 100000 ;NUMCLS = 5
 NYPRIN = 1 ;IYPRF = 1 ;IYPRL = 10000
 IPLTF = 1 ;IPLTL = -1 ;NPLT = 2
 ISWPRF = 1 ;ISWPRL = 100000
 ITABL = 2 ;IPROF = 1
 ABSIZ =0.5 ;ORSIZ =0.4
 NTZPRF = 1 ;NCOLPF = 50
 ICHR = 2 ;NCOLCO = 45 ;NROWCO = 20
   No PATCHes yet used for this Group
 ************************************************************
  Group 24. Dumps For Restarts
 SAVE = T ;NOWIPE = F
 NSAVE =CHAM
STOP