TALK=T;RUN(1,1)
  DISPLAY
  This case provides a test of the Lam-Bremhorst low-Reynolds
  number k-e model for 2d steady developing flow in a channel.
  As a test of symmetry both halves of the channel are
  considered in the y-z plane. In addition the temperature
  equation is solved via the TEM1 variable with a uniformly-
  distributed heat flux applied to the fluid at each wall. The
  case acts as a benchmark calculation against which may be
  compared calculations of the same case involving blockages
  represented via "conjugate heat transfer" or "porosities".
  A relatively coarse grid is used so as to permit convergence
  in about 400 sweeps. The problem has been set up to perform
  30 sweeps only, so as to reduce execution times in performing
  routine testing procedures.
  ENDDIS
 ************************************************************
  Group 1. Run Title and Number
 ************************************************************
 ************************************************************
 
 TEXT(LAM-BRE_2D Y-Z NOPOR CHANNEL TEST  :T215)
 
 ************************************************************
 ************************************************************
 
 IRUNN = 1 ;LIBREF = 14
 ************************************************************
  Group 2. Time dependence
 STEADY = T
 ************************************************************
  Group 3. X-Direction Grid Spacing
 CARTES = T
 NX = 1
 XULAST =1.
 XFRAC(1)=1.
 ************************************************************
  Group 4. Y-Direction Grid Spacing
 NY = 26
 YVLAST =0.1
 YFRAC(1)=2.264969E-04 ;YFRAC(2)=6.341913E-04
 YFRAC(3)=1.368041E-03 ;YFRAC(4)=2.688971E-03
 YFRAC(5)=5.066644E-03 ;YFRAC(6)=9.346456E-03
 YFRAC(7)=0.01705 ;YFRAC(8)=0.030917
 YFRAC(9)=0.055877 ;YFRAC(10)=0.100804
 YFRAC(11)=0.181674 ;YFRAC(12)=0.32724
 YFRAC(13)=0.5 ;YFRAC(14)=0.67276
 YFRAC(15)=0.818326 ;YFRAC(16)=0.899196
 YFRAC(17)=0.944123 ;YFRAC(18)=0.969083
 YFRAC(19)=0.98295 ;YFRAC(20)=0.990654
 YFRAC(21)=0.994933 ;YFRAC(22)=0.997311
 YFRAC(23)=0.998632 ;YFRAC(24)=0.999366
 YFRAC(25)=0.999774 ;YFRAC(26)=1.
 ************************************************************
  Group 5. Z-Direction Grid Spacing
 PARAB = F
 NZ = 10
 ZWLAST =0.5
 ZFRAC(1)=0.1 ;ZFRAC(2)=0.2
 ZFRAC(3)=0.3 ;ZFRAC(4)=0.4
 ZFRAC(5)=0.5 ;ZFRAC(6)=0.6
 ZFRAC(7)=0.7 ;ZFRAC(8)=0.8
 ZFRAC(9)=0.9 ;ZFRAC(10)=1.
 ************************************************************
  Group 6. Body-Fitted Coordinates
 ************************************************************
  Group 7. Variables: STOREd,SOLVEd,NAMEd
 ONEPHS = T
 NAME(1)=P1 ;NAME(5)=V1
 NAME(7)=W1 ;NAME(12)=KE
 NAME(13)=EP ;NAME(146)=ENUT
 NAME(147)=LTLS ;NAME(148)=WDIS
 NAME(149)=PRPS ;NAME(150)=TEM1
    * Y in SOLUTN argument list denotes:
    * 1-stored 2-solved 3-whole-field
    * 4-point-by-point 5-explicit 6-harmonic averaging 
 SOLUTN(P1,Y,Y,Y,N,N,Y)
 SOLUTN(V1,Y,Y,N,N,N,Y)
 SOLUTN(W1,Y,Y,N,N,N,Y)
 SOLUTN(KE,Y,Y,N,N,N,Y)
 SOLUTN(EP,Y,Y,N,N,N,Y)
 SOLUTN(ENUT,Y,N,N,N,N,Y)
 SOLUTN(LTLS,Y,Y,Y,N,N,Y)
 SOLUTN(WDIS,Y,N,N,N,N,N)
 SOLUTN(PRPS,Y,N,N,N,N,Y)
 SOLUTN(TEM1,Y,Y,Y,N,N,Y)
 VIST = 146
 PRPS = 149
 ************************************************************
  Group 8. Terms & Devices
    * Y in TERMS argument list denotes:
    * 1-built-in source 2-convection 3-diffusion 4-transient
    * 5-first phase variable 6-interphase transport         
 TERMS(P1,Y,Y,Y,N,Y,Y)
 TERMS(V1,Y,Y,Y,Y,Y,Y)
 TERMS(W1,Y,Y,Y,Y,Y,Y)
 TERMS(KE,N,Y,Y,Y,Y,N)
 TERMS(EP,N,Y,Y,Y,Y,N)
 TERMS(LTLS,N,N,Y,N,Y,Y)
 TERMS(TEM1,N,Y,Y,Y,Y,Y)
 DIFCUT =0.5 ;ZDIFAC =1.
 GALA = F ;ADDDIF = F
 NEWENT = T
 ISOLX = -1 ;ISOLY = -1 ;ISOLZ = -1
 ************************************************************
  Group 9. Properties used if PRPS is not
  stored, and where PRPS = -1.0 if it is!
 RHO1 =1. ;TMP1 =0.
 EL1 = GRND4
 TSURR =0. ;TEMP0 =0.
 PRESS0 =0.
 DVO1DT =0. ;DRH1DP =0.
 EMISS =0. ;SCATT =0.
 RADIA =0. ;RADIB =0.
 EL1A =0. ;EL1B =0.
 EL1C =0.
 ENUL =1.0E-05 ;ENUT = GRND3
 ENUTA =0. ;ENUTB =0.
 ENUTC =0.
 IENUTA = 3
 PRNDTL(V1)=1. ;PRNDTL(W1)=1.
 PRNDTL(KE)=1. ;PRNDTL(EP)=1.
 PRNDTL(LTLS)=1. ;PRNDTL(TEM1)=CONDFILE
 PRT(V1)=1. ;PRT(W1)=1.
 PRT(KE)=1. ;PRT(EP)=1.314
 PRT(LTLS)=1. ;PRT(TEM1)=1.
 CP1 =1. ;CP2 =1.
   *  List of user-defined materials to be read by EARTH
    MATFLG=T;IMAT=1   
   *  Name
   *Ind. Dens.  Viscos.  Spec.heat  Conduct.  Expans.  Compr.
   *  
    34 1. 1.E-5 1.E3 0.01 0
 ************************************************************
  Group 10.Inter-Phase Transfer Processes
 ************************************************************
  Group 11.Initial field variables (PHIs)
 FIINIT(P1)=1.0E-03 ;FIINIT(V1)=1.0E-10
 FIINIT(W1)=10. ;FIINIT(KE)=0.389857
 FIINIT(EP)=7.998817 ;FIINIT(ENUT)=1.0E-10
 FIINIT(LTLS)=1.0E-10 ;FIINIT(WDIS)=1.0E-02
 FIINIT(PRPS)=34. ;FIINIT(TEM1)=300.
   No PATCHes yet used for this Group
 INIADD = F
 FSWEEP = 1
 NAMFI =CHAM
 ************************************************************
  Group 12. Patchwise adjustment of terms
  Patches for this group are printed with those
  for Group 13.
  Their names begin either with GP12 or &
 ************************************************************
  Group 13. Boundary & Special Sources
 
 PATCH(KESOURCE,PHASEM, 0, 0, 0, 0, 0, 0, 1, 1)
 COVAL(KESOURCE,KE , GRND4 , GRND4 )
 COVAL(KESOURCE,EP , GRND4 , GRND4 )
 
 PATCH(INLET ,LOW , 1, 1, 1, 26, 1, 1, 1, 1)
 COVAL(INLET ,P1 , FIXFLU ,10. )
 COVAL(INLET ,W1 ,0. ,10. )
 COVAL(INLET ,KE ,0. ,0.389857 )
 COVAL(INLET ,EP ,0. ,7.998817 )
 COVAL(INLET ,TEM1,0. ,300. )
 
 PATCH(OUTL ,HIGH , 1, 1, 1, 26, 10, 10, 1, 1)
 COVAL(OUTL ,P1 ,1000. ,0. )
 COVAL(OUTL ,V1 ,0. ,0. )
 COVAL(OUTL ,W1 ,0. ,0. )
 COVAL(OUTL ,KE ,0. ,0. )
 COVAL(OUTL ,EP ,0. ,0. )
 COVAL(OUTL ,TEM1,0. , SAME )
 
 PATCH(WALLN ,NWALL , 1, 1, 26, 26, 1, 10, 1, 1)
 COVAL(WALLN ,W1 , GRND2 ,0. )
 COVAL(WALLN ,KE ,1. ,0. )
 COVAL(WALLN ,LTLS,1. ,0. )
 COVAL(WALLN ,TEM1, FIXFLU ,1000. )
 
 PATCH(WALLS ,SWALL , 1, 1, 1, 1, 1, 10, 1, 1)
 COVAL(WALLS ,W1 , GRND2 ,0. )
 COVAL(WALLS ,KE ,1. ,0. )
 COVAL(WALLS ,LTLS,1. ,0. )
 COVAL(WALLS ,TEM1, FIXFLU ,1000. )
 XCYCLE = F
 EGWF = T
 WALLCO = GRND2
 ************************************************************
  Group 14. Downstream Pressure For PARAB
 ************************************************************
  Group 15. Terminate Sweeps
 LSWEEP = 30 ;ISWC1 = 1
 LITHYD = 1 ;LITFLX = 1 ;LITC = 1 ;ITHC1 = 1
 SELREF = T
 RESFAC =1.0E-04
 ************************************************************
  Group 16. Terminate Iterations
 LITER(P1)=20 ;LITER(V1)=10
 LITER(W1)=10 ;LITER(KE)=20
 LITER(EP)=20 ;LITER(LTLS)=20
 LITER(TEM1)=20
 ENDIT(P1)=1.0E-03 ;ENDIT(V1)=1.0E-03
 ENDIT(W1)=1.0E-03 ;ENDIT(KE)=1.0E-03
 ENDIT(EP)=1.0E-03 ;ENDIT(LTLS)=1.0E-03
 ENDIT(TEM1)=1.0E-03
 ************************************************************
  Group 17. Relaxation
 RELAX(P1,LINRLX,1.)
 RELAX(V1,FALSDT,0.025)
 RELAX(W1,FALSDT,0.025)
 RELAX(KE,FALSDT,0.025)
 RELAX(EP,FALSDT,0.025)
 RELAX(ENUT,LINRLX,1.)
 RELAX(LTLS,FALSDT,1.0E+09)
 RELAX(WDIS,LINRLX,1.)
 RELAX(PRPS,LINRLX,1.)
 RELAX(TEM1,FALSDT,1.0E+09)
 KELIN = 1
 OVRRLX =0.
 EXPERT = F ;NNORSL = F
 ************************************************************
  Group 18. Limits
 VARMAX(P1)=1.0E+10 ;VARMIN(P1)=-1.0E+10
 VARMAX(V1)=1.0E+06 ;VARMIN(V1)=-1.0E+06
 VARMAX(W1)=1.0E+06 ;VARMIN(W1)=-1.0E+06
 VARMAX(KE)=1.0E+10 ;VARMIN(KE)=1.0E-10
 VARMAX(EP)=1.0E+10 ;VARMIN(EP)=1.0E-10
 VARMAX(ENUT)=1.0E+10 ;VARMIN(ENUT)=-1.0E+10
 VARMAX(LTLS)=1.0E+10 ;VARMIN(LTLS)=-1.0E+10
 VARMAX(WDIS)=1.0E+10 ;VARMIN(WDIS)=-1.0E+10
 VARMAX(PRPS)=1.0E+10 ;VARMIN(PRPS)=-1.0E+10
 VARMAX(TEM1)=1.0E+10 ;VARMIN(TEM1)=-1.0E+10
 ************************************************************
  Group 19. Data transmitted to GROUND
 GENK = T
 YPLS = T
 PARSOL = F
 IENUTA = 3
 ISG62 = 1
 CSG10   ='Q1'
 SPEDAT(SET,MATERIAL,34,L,T)
 ************************************************************
  Group 20. Preliminary Printout
 ************************************************************
  Group 21. Print-out of Variables
 INIFLD = F ;SUBWGR = F
    * Y in OUTPUT argument list denotes:
    * 1-field 2-correction-eq. monitor 3-selective dumping      
    * 4-whole-field residual 5-spot-value table 6-residual table
 OUTPUT(P1,Y,N,Y,Y,Y,Y)
 OUTPUT(V1,Y,N,Y,Y,Y,Y)
 OUTPUT(W1,Y,N,Y,Y,Y,Y)
 OUTPUT(KE,Y,N,Y,Y,Y,Y)
 OUTPUT(EP,Y,N,Y,Y,Y,Y)
 OUTPUT(ENUT,Y,N,Y,N,N,N)
 OUTPUT(LTLS,Y,N,Y,Y,Y,Y)
 OUTPUT(WDIS,Y,N,N,N,N,N)
 OUTPUT(PRPS,Y,N,Y,N,N,N)
 OUTPUT(TEM1,Y,N,Y,Y,Y,Y)
 ************************************************************
  Group 22. Monitor Print-Out
 IXMON = 1 ;IYMON = 26 ;IZMON = 5
 NPRMON = 100000 ;NPRMNT = 1 ;TSTSWP = -1
 UWATCH = T ;USTEER = T
 HIGHLO = F
 ************************************************************
  Group 23.Field Print-Out & Plot Control
 NPRINT = 30 ;NUMCLS = 5
 NYPRIN = 1 ;IYPRF = 1 ;IYPRL = 10000
 NZPRIN = 1 ;IZPRF = 1 ;IZPRL = 10000
 XZPR = F ;YZPR = F
 IPLTF = 1 ;IPLTL = -1 ;NPLT = 5
 ISWPRF = 1 ;ISWPRL = 100000
 ITABL = 3 ;IPROF = 1
 ABSIZ =0.5 ;ORSIZ =0.4
 NTZPRF = 1 ;NCOLPF = 50
 ICHR = 2 ;NCOLCO = 45 ;NROWCO = 20
   No PATCHes yet used for this Group
 ************************************************************
  Group 24. Dumps For Restarts
 SAVE = T ;NOWIPE = F
 NSAVE =CHAM
STOP