TALK=T;RUN(1,1)
  PHOTON USE
  p






  gr ou z 1;gr ou y 1 x 17 22 col 15;gr ou y m x 17 22 col 15
  msg red colour outlines the Heat Source
  msg Press RETURN to continue
  pause
  msg Velocity vectors for the steam
  vec z 1 sh
  msg Press  to continue
  pause
  vec cl;red
  set vec ph 2
  msg Velocity vectors for the water droplets
  vec z 1 sh
  msg Press  to continue
  pause
  vec cl;red
  msg Contours of pressure
  con p1 z 1 fi;.01
  msg Press  to continue
  pause
  con cl;red
  msg Contours of mass transfer rate
  con mdot z 1 fi;.01
  con mdot z 1;va;1;0
  msg Press  to continue
  pause
  con cl;red
  msg Volume fraction of water droplets
  con r2 z 1 fi;.001
  msg Press e to END
  enduse
  DISPLAY
  BOILING DROPLETS IN A DUCT
  2-dimensional (x-y), BFC, steady, elliptic simulation

  In this case the saturated water droplets enter the
  S-shaped duct, and then boil to produce steam.
             |  |
             |  |    heat source
             |  |    /
             |  \___|__
             \          \
              --------\  \
        sat.  ________/  /
           -->          /
        water ---------/
  enddis
 ************************************************************
  Group 1. Run Title and Number
 ************************************************************
 ************************************************************
 
 TEXT(Boiling Droplets in a Duct              )
 
 ************************************************************
 ************************************************************
 
 IRUNN = 1 ;LIBREF = 14
 ************************************************************
  Group 2. Time dependence
 STEADY = T
 ************************************************************
  Group 3. X-Direction Grid Spacing
 CARTES = T
 NX = 33
 XULAST =0.34
 ************************************************************
  Group 4. Y-Direction Grid Spacing
 NY = 8
 YVLAST =0.03
 ************************************************************
  Group 5. Z-Direction Grid Spacing
 PARAB = F
 NZ = 1
 ZWLAST =0.1
 ************************************************************
  Group 6. Body-Fitted Coordinates
 BFC = T ;NONORT = T
 NCRT = -1
 RSTGEO = F ;SAVGEO = F
 UUP = T ;VUP = F ;WUP = F
 NGEOM =CHAM
 NAMXYZ =CHAM
 ANGMIN =20.
 DOMAIN(   1,  34,   1,   9,   1,   2)
    * Set fixed sub-domain
 FIXDOM(   1,   0,   0,   0,   0,   0,   0)
 FIXDOM(   2,   0,   0,   0,   0,   0,   0)
 FIXDOM(   3,   0,   0,   0,   0,   0,   0)
 FIXDOM(   4,   0,   0,   0,   0,   0,   0)
 FIXDOM(   5,   0,   0,   0,   0,   0,   0)
 FIXDOM(   6,   0,   0,   0,   0,   0,   0)
 FIXDOM(   7,   0,   0,   0,   0,   0,   0)
 FIXDOM(   8,   0,   0,   0,   0,   0,   0)
 FIXDOM(   9,   0,   0,   0,   0,   0,   0)
 FIXDOM(  10,   0,   0,   0,   0,   0,   0)
 LIJ = F ;LJK = T ;LIK = F
 ************************************************************
  Group 7. Variables: STOREd,SOLVEd,NAMEd
 ONEPHS = F
 EQUVEL = F
 NAME(1)=P1 ;NAME(3)=U1
 NAME(4)=U2 ;NAME(5)=V1
 NAME(6)=V2 ;NAME(9)=R1
 NAME(10)=R2 ;NAME(14)=H1
 NAME(15)=H2 ;NAME(141)=TMP2
 NAME(142)=TMP1 ;NAME(143)=MDOT
 NAME(144)=CFIP ;NAME(145)=W2CR
 NAME(146)=V2CR ;NAME(147)=U2CR
 NAME(148)=WCRT ;NAME(149)=VCRT
 NAME(150)=UCRT
    * Y in SOLUTN argument list denotes:
    * 1-stored 2-solved 3-whole-field
    * 4-point-by-point 5-explicit 6-harmonic averaging 
 SOLUTN(P1,Y,Y,Y,N,N,N)
 SOLUTN(U1,Y,Y,N,N,N,Y)
 SOLUTN(U2,Y,Y,N,N,N,Y)
 SOLUTN(V1,Y,Y,N,N,N,Y)
 SOLUTN(V2,Y,Y,N,N,N,Y)
 SOLUTN(R2,Y,Y,N,N,N,Y)
 SOLUTN(H1,Y,Y,N,N,N,Y)
 SOLUTN(H2,Y,Y,N,N,N,Y)
 SOLUTN(TMP2,Y,N,N,N,N,Y)
 SOLUTN(TMP1,Y,N,N,N,N,Y)
 SOLUTN(MDOT,Y,N,N,N,N,Y)
 SOLUTN(CFIP,Y,N,N,N,N,Y)
 SOLUTN(W2CR,Y,N,N,N,N,N)
 SOLUTN(V2CR,Y,N,N,N,N,N)
 SOLUTN(U2CR,Y,N,N,N,N,N)
 SOLUTN(WCRT,Y,N,N,N,N,N)
 SOLUTN(VCRT,Y,N,N,N,N,N)
 SOLUTN(UCRT,Y,N,N,N,N,N)
 INTMDT = 143
 INTFRC = 144
 TEMP1 = 142
 TEMP2 = 141
 ************************************************************
  Group 8. Terms & Devices
    * Y in TERMS argument list denotes:
    * 1-built-in source 2-convection 3-diffusion 4-transient
    * 5-first phase variable 6-interphase transport         
 TERMS(P1,Y,Y,Y,N,Y,Y)
 TERMS(U1,Y,Y,Y,Y,Y,Y)
 TERMS(U2,Y,Y,Y,Y,N,Y)
 TERMS(V1,Y,Y,Y,Y,Y,Y)
 TERMS(V2,Y,Y,Y,Y,N,Y)
 TERMS(R2,Y,Y,Y,Y,N,Y)
 TERMS(H1,Y,Y,Y,Y,Y,Y)
 TERMS(H2,Y,Y,Y,Y,N,Y)
 DIFCUT =0.5 ;ZDIFAC =1.
 GALA = F ;ADDDIF = F
 EQDVDP = F
 ISOLX = -1 ;ISOLY = -1 ;ISOLZ = -1
 ************************************************************
  Group 9. Properties used if PRPS is not
  stored, and where PRPS = -1.0 if it is!
 RHO1 =0.5 ;TMP1 = GRND2 ;EL1 =0.
 TSURR =0. ;TEMP0 =0. ;PRESS0 =0.
 DVO1DT =0.5 ;DRH1DP =0.
 TMP1A =-273. ;TMP1B =0. ;TMP1C =0.
 EMISS =0. ;SCATT =0.
 RADIA =0. ;RADIB =0.
 RHO2 =950. ;TMP2 = GRND2 ;EL2 =0.
 DVO2DT =0. ;DRH2DP =0.
 TMP2A =-273. ;TMP2B =0. ;TMP2C =0.
 ENUL =1.25E-04 ;ENUT =0.0125
 PHINT(U1)=-2.022E+04 ;PHINT(U2)=-2.022E+04
 PHINT(V1)=-2.022E+04 ;PHINT(V2)=-2.022E+04
 PHINT(R2)=-2.022E+04 ;PHINT(H1)=2.5E+06
 PHINT(H2)=4.0E+05
 PRNDTL(U1)=1. ;PRNDTL(U2)=1.
 PRNDTL(V1)=1. ;PRNDTL(V2)=1.
 PRNDTL(R2)=1. ;PRNDTL(H1)=0.97
 PRNDTL(H2)=1.73
 PRT(U1)=1. ;PRT(U2)=1.
 PRT(V1)=1. ;PRT(V2)=1.
 PRT(R2)=1. ;PRT(H1)=1.
 PRT(H2)=1.
 CP1 =6702. ;CP2 =1072.
 ************************************************************
  Group 10.Inter-Phase Transfer Processes
 CFIPS =2.25E+07
 RLOLIM =0. ;CMDOT = HEATBL
 CINT(P1)=1. ;CINT(U1)=1.
 CINT(U2)=1. ;CINT(V1)=1.
 CINT(V2)=1. ;CINT(R2)=1.
 CINT(H1)=0.687285 ;CINT(H2)=0.385356
 PHINT(P1)=-2.022E+04 ;PHINT(U1)=-2.022E+04
 PHINT(U2)=-2.022E+04 ;PHINT(V1)=-2.022E+04
 PHINT(V2)=-2.022E+04 ;PHINT(R2)=-2.022E+04
 PHINT(H1)=2.5E+06 ;PHINT(H2)=4.0E+05
 ************************************************************
  Group 11.Initial field variables (PHIs)
 FIINIT(P1)=1.0E-10 ;FIINIT(U1)=10.
 FIINIT(U2)=10. ;FIINIT(V1)=1.0E-10
 FIINIT(V2)=1.0E-10 ;FIINIT(R1)=0.95
 FIINIT(R2)=0.05 ;FIINIT(H1)=2.5E+06
 FIINIT(H2)=3.99E+05 ;FIINIT(TMP2)=1.0E-10
 FIINIT(TMP1)=1.0E-10 ;FIINIT(MDOT)=1.0E-10
 FIINIT(CFIP)=1.0E-10 ;FIINIT(W2CR)=1.0E-10
 FIINIT(V2CR)=1.0E-10 ;FIINIT(U2CR)=1.0E-10
 FIINIT(WCRT)=1.0E-10 ;FIINIT(VCRT)=1.0E-10
 FIINIT(UCRT)=1.0E-10
   No PATCHes yet used for this Group
 INIADD = F
 FSWEEP = 1
 NAMFI =CHAM
 ************************************************************
  Group 12. Patchwise adjustment of terms
  Patches for this group are printed with those
  for Group 13.
  Their names begin either with GP12 or &
 ************************************************************
  Group 13. Boundary & Special Sources
 
 PATCH(INLET ,WEST , 1, 1, 1, 8, 1, 1, 1, 1)
 COVAL(INLET ,U1 ,0. ,10. )
 COVAL(INLET ,U2 ,0. ,10. )
 COVAL(INLET ,V1 ,0. ,0. )
 COVAL(INLET ,V2 ,0. ,0. )
 COVAL(INLET ,R1 , FIXFLU ,4.75 )
 COVAL(INLET ,R2 , FIXFLU ,475.000122 )
 COVAL(INLET ,H1 ,0. ,2.5E+06 )
 COVAL(INLET ,H2 ,0. ,3.99E+05 )
 
 PATCH(OUTLET ,EAST , 33, 33, 1, 8, 1, 1, 1, 1)
 COVAL(OUTLET ,V1 ,0. ,0. )
 COVAL(OUTLET ,V2 ,0. ,0. )
 COVAL(OUTLET ,R1 ,500. ,0. )
 COVAL(OUTLET ,R2 ,9.5E+05 ,0. )
 COVAL(OUTLET ,H1 ,0. , SAME )
 COVAL(OUTLET ,H2 ,0. , SAME )
 
 PATCH(TOP1 ,NWALL , 1, 16, 8, 8, 1, 1, 1, 1)
 COVAL(TOP1 ,U1 , GRND2 ,0. )
 COVAL(TOP1 ,H1 , GRND2 ,2.49E+06 )
 
 PATCH(TOP2 ,NWALL , 23, 33, 8, 8, 1, 1, 1, 1)
 COVAL(TOP2 ,U1 , GRND2 ,0. )
 COVAL(TOP2 ,H1 , GRND2 ,2.4999E+06 )
 
 PATCH(BOT1 ,SWALL , 1, 16, 1, 1, 1, 1, 1, 1)
 COVAL(BOT1 ,U1 , GRND2 ,0. )
 COVAL(BOT1 ,H1 , GRND2 ,2.49E+06 )
 
 PATCH(BOT2 ,SWALL , 23, 33, 1, 1, 1, 1, 1, 1)
 COVAL(BOT2 ,U1 , GRND2 ,0. )
 COVAL(BOT2 ,H1 , GRND2 ,2.4999E+06 )
 
 PATCH(HEAT1 ,NORTH , 17, 22, 8, 8, 1, 1, 1, 1)
 COVAL(HEAT1 ,H1 , FIXFLU ,3.0E+06 )
 
 PATCH(HEAT2 ,SOUTH , 17, 22, 1, 1, 1, 1, 1, 1)
 COVAL(HEAT2 ,H1 , FIXFLU ,3.0E+06 )
 
 PATCH(BUOYANCY,PHASEM, 1, 33, 1, 8, 1, 1, 1, 1)
 COVAL(BUOYANCY,U1 , FIXFLU , GRND2 )
 COVAL(BUOYANCY,U2 , FIXFLU , GRND2 )
 COVAL(BUOYANCY,V1 , FIXFLU , GRND2 )
 COVAL(BUOYANCY,V2 , FIXFLU , GRND2 )
 XCYCLE = F
 EGWF = T
 WALLCO = GRND2
 BUOYA =0. ; BUOYB =-9.81 ; BUOYC =0.
 BUOYD =0.5
 ************************************************************
  Group 14. Downstream Pressure For PARAB
 ************************************************************
  Group 15. Terminate Sweeps
 LSWEEP = 150 ;ISWC1 = 1
 LITHYD = 1 ;LITFLX = 1 ;LITC = 1 ;ITHC1 = 1
 ISWR1 = 1 ;ISWR2 = 10000
 SELREF = T
 RESFAC =1.0E-02
 ************************************************************
  Group 16. Terminate Iterations
 LITER(P1)=20 ;LITER(U1)=10
 LITER(U2)=10 ;LITER(V1)=10
 LITER(V2)=10 ;LITER(R2)=1
 LITER(H1)=20 ;LITER(H2)=20
 ENDIT(P1)=1.0E-03 ;ENDIT(U1)=1.0E-03
 ENDIT(U2)=1.0E-03 ;ENDIT(V1)=1.0E-03
 ENDIT(V2)=1.0E-03 ;ENDIT(R2)=1.0E-03
 ENDIT(H1)=1.0E-03 ;ENDIT(H2)=1.0E-03
 ************************************************************
  Group 17. Relaxation
 RELAX(P1,LINRLX,0.7)
 RELAX(U1,FALSDT,1.666667E-04)
 RELAX(U2,FALSDT,1.666667E-04)
 RELAX(V1,FALSDT,1.666667E-04)
 RELAX(V2,FALSDT,1.666667E-04)
 RELAX(R1,LINRLX,0.2)
 RELAX(R2,LINRLX,0.2)
 RELAX(H1,FALSDT,1.666667E-04)
 RELAX(H2,FALSDT,1.666667E-04)
 RELAX(TMP2,LINRLX,1.)
 RELAX(TMP1,LINRLX,1.)
 RELAX(MDOT,LINRLX,0.1)
 RELAX(CFIP,LINRLX,1.)
 RELAX(W2CR,LINRLX,1.)
 RELAX(V2CR,LINRLX,1.)
 RELAX(U2CR,LINRLX,1.)
 RELAX(WCRT,LINRLX,1.)
 RELAX(VCRT,LINRLX,1.)
 RELAX(UCRT,LINRLX,1.)
 OVRRLX =0.
 EXPERT = F ;NNORSL = F
 ************************************************************
  Group 18. Limits
 VARMAX(P1)=1.0E+10 ;VARMIN(P1)=-1.0E+10
 VARMAX(U1)=1.0E+06 ;VARMIN(U1)=-1.0E+06
 VARMAX(U2)=1.0E+06 ;VARMIN(U2)=-1.0E+06
 VARMAX(V1)=1.0E+06 ;VARMIN(V1)=-1.0E+06
 VARMAX(V2)=1.0E+06 ;VARMIN(V2)=-1.0E+06
 VARMAX(R1)=1. ;VARMIN(R1)=1.0E-06
 VARMAX(R2)=1. ;VARMIN(R2)=1.0E-06
 VARMAX(H1)=1.0E+10 ;VARMIN(H1)=-1.0E+10
 VARMAX(H2)=1.0E+10 ;VARMIN(H2)=-1.0E+10
 VARMAX(TMP2)=1.0E+10 ;VARMIN(TMP2)=-1.0E+10
 VARMAX(TMP1)=1.0E+10 ;VARMIN(TMP1)=-1.0E+10
 VARMAX(MDOT)=1.0E+10 ;VARMIN(MDOT)=-1.0E+10
 VARMAX(CFIP)=1.0E+10 ;VARMIN(CFIP)=-1.0E+10
 VARMAX(W2CR)=1.0E+10 ;VARMIN(W2CR)=-1.0E+10
 VARMAX(V2CR)=1.0E+10 ;VARMIN(V2CR)=-1.0E+10
 VARMAX(U2CR)=1.0E+10 ;VARMIN(U2CR)=-1.0E+10
 VARMAX(WCRT)=1.0E+10 ;VARMIN(WCRT)=-1.0E+10
 VARMAX(VCRT)=1.0E+10 ;VARMIN(VCRT)=-1.0E+10
 VARMAX(UCRT)=1.0E+10 ;VARMIN(UCRT)=-1.0E+10
 ************************************************************
  Group 19. Data transmitted to GROUND
 PARSOL = F
 ISG62 = 1
 SPEDAT(SET,GXMONI,PLOTALL,L,T)
 ************************************************************
  Group 20. Preliminary Printout
 ************************************************************
  Group 21. Print-out of Variables
 INIFLD = F ;SUBWGR = F
    * Y in OUTPUT argument list denotes:
    * 1-field 2-correction-eq. monitor 3-selective dumping      
    * 4-whole-field residual 5-spot-value table 6-residual table
 OUTPUT(P1,Y,N,Y,Y,Y,Y)
 OUTPUT(U1,Y,N,Y,Y,Y,Y)
 OUTPUT(U2,Y,N,Y,Y,Y,Y)
 OUTPUT(V1,Y,N,Y,Y,Y,Y)
 OUTPUT(V2,Y,N,Y,Y,Y,Y)
 OUTPUT(R1,Y,N,Y,N,N,N)
 OUTPUT(R2,Y,N,Y,Y,Y,Y)
 OUTPUT(H1,Y,N,Y,Y,Y,Y)
 OUTPUT(H2,Y,N,Y,Y,Y,Y)
 OUTPUT(TMP2,Y,N,Y,N,N,N)
 OUTPUT(TMP1,Y,N,Y,N,N,N)
 OUTPUT(MDOT,Y,N,Y,N,N,N)
 OUTPUT(CFIP,Y,N,Y,N,N,N)
 OUTPUT(W2CR,Y,N,Y,N,N,N)
 OUTPUT(V2CR,Y,N,Y,N,N,N)
 OUTPUT(U2CR,Y,N,Y,N,N,N)
 OUTPUT(WCRT,Y,N,Y,N,N,N)
 OUTPUT(VCRT,Y,N,Y,N,N,N)
 OUTPUT(UCRT,Y,N,Y,N,N,N)
 ************************************************************
  Group 22. Monitor Print-Out
 IXMON = 24 ;IYMON = 4 ;IZMON = 1
 NPRMON = 100000 ;NPRMNT = 1 ;TSTSWP = -1
 UWATCH = T ;USTEER = T
 HIGHLO = F
 ************************************************************
  Group 23.Field Print-Out & Plot Control
 NPRINT = 100000 ;NUMCLS = 5
 NXPRIN = -1 ;IXPRF = 1 ;IXPRL = 10000
 NYPRIN = -1 ;IYPRF = 1 ;IYPRL = 10000
 IPLTF = 1 ;IPLTL = -1 ;NPLT = -1
 ISWPRF = 1 ;ISWPRL = 100000
 ITABL = 3 ;IPROF = 1
 ABSIZ =0.5 ;ORSIZ =0.4
 NTZPRF = 1 ;NCOLPF = 50
 ICHR = 2 ;NCOLCO = 45 ;NROWCO = 20
   No PATCHes yet used for this Group
 ************************************************************
  Group 24. Dumps For Restarts
 SAVE = T ;NOWIPE = F
 NSAVE =CHAM
STOP