```
TALK=T;RUN(1,1)
************************************************************
Group 1. Run Title and Number
************************************************************
************************************************************

TEXT(USP. 3D Steady Heat Conduction In Cube  )

************************************************************
************************************************************

IRUNN = 1 ;LIBREF = 0
************************************************************
Group 2. Time dependence
************************************************************
Group 3. X-Direction Grid Spacing
CARTES = T
NX = 20
XULAST =1.
XFRAC(1)=0.05 ;XFRAC(11)=0.55
************************************************************
Group 4. Y-Direction Grid Spacing
NY = 20
YVLAST =1.
YFRAC(1)=0.05 ;YFRAC(11)=0.55
************************************************************
Group 5. Z-Direction Grid Spacing
PARAB = F
NZ = 20
ZWLAST =1.
ZFRAC(1)=0.05 ;ZFRAC(2)=0.1
ZFRAC(3)=0.15 ;ZFRAC(4)=0.2
ZFRAC(5)=0.25 ;ZFRAC(6)=0.3
ZFRAC(7)=0.35 ;ZFRAC(8)=0.4
ZFRAC(9)=0.45 ;ZFRAC(10)=0.5
ZFRAC(11)=0.55 ;ZFRAC(12)=0.6
ZFRAC(13)=0.65 ;ZFRAC(14)=0.7
ZFRAC(15)=0.75 ;ZFRAC(16)=0.8
ZFRAC(17)=0.85 ;ZFRAC(18)=0.9
ZFRAC(19)=0.95 ;ZFRAC(20)=1.
************************************************************
Group 6. Body-Fitted Coordinates
************************************************************
Group 7. Variables: STOREd,SOLVEd,NAMEd
ONEPHS = T
NAME(149)=PRPS ;NAME(150)=TEMP
* Y in SOLUTN argument list denotes:
* 1-stored 2-solved 3-whole-field
* 4-point-by-point 5-explicit 6-harmonic averaging
SOLUTN(PRPS,Y,N,N,N,N,Y)
SOLUTN(TEMP,Y,Y,N,N,N,Y)
PRPS = 149
************************************************************
Group 8. Terms & Devices
* Y in TERMS argument list denotes:
* 1-built-in source 2-convection 3-diffusion 4-transient
* 5-first phase variable 6-interphase transport
TERMS(TEMP,N,N,Y,N,Y,Y)
DIFCUT =0.5 ;ZDIFAC =1.
GALA = F ;ADDDIF = F
ISOLX = -1 ;ISOLY = -1 ;ISOLZ = -1
USP = T ; USPDBG= F
UTCPLT = F ; USPIMB= F
UAUTO = F ; UGTGRD= F
USPVTK = T ; USPTER= F
USCANX = T ; USCANY= T
USCANZ = T
MXLEV = 0 ;MYLEV = 0 ;MZLEV = 0
DOMAT = -1
CELLST = 10 ; FACEST= 10
MINPRP = -1 ; MAXPRP= 100
UMXLEV = 1 ; UMXCLS= 10000
UNOLAY = 2 ; UIOLEV= 1
UWALEV = 1 ; UGRITR= 2
UMXCRS = 16
USPREL =0.7 ; UMNCEL=1.
UDVREL =1.
************************************************************
Group 9. Properties used if PRPS is not
stored, and where PRPS = -1.0 if it is!
RHO1 =1. ;TMP1 =0.
EL1 =0.
TSURR =0. ;TEMP0 =0.
PRESS0 =0.
DVO1DT =0. ;DRH1DP =0.
EMISS =0. ;SCATT =0.
ENUL =1. ;ENUT =0.
PRNDTL(TEMP)=1.
PRT(TEMP)=1.
CP1 =1. ;CP2 =1.
************************************************************
Group 10.Inter-Phase Transfer Processes
************************************************************
Group 11.Initial field variables (PHIs)
FIINIT(PRPS)=-1. ;FIINIT(TEMP)=1.0E-10

PATCH(CENTRAL ,INIVAL, 2, 19, 2, 19, 1, 20, 1, 1)
INIT(CENTRAL ,PRPS,0. ,199. )
FSWEEP = 1
NAMFI =CHAM
************************************************************
Group 12. Patchwise adjustment of terms
Patches for this group are printed with those
for Group 13.
Their names begin either with GP12 or &
************************************************************
Group 13. Boundary & Special Sources

PATCH(COLD ,CELL , 1, 20, 1, 20, 1, 1, 1, 1)
COVAL(COLD ,TEMP,1.0E+05 ,0. )

PATCH(HOT ,CELL , 1, 20, 1, 20, 20, 20, 1, 1)
COVAL(HOT ,TEMP,1.0E+05 ,1. )
XCYCLE = F
EGWF = T
WALLCO = GRND2
************************************************************
Group 14. Downstream Pressure For PARAB
************************************************************
Group 15. Terminate Sweeps
LSWEEP = 100 ;ISWC1 = 1
LITHYD = 1 ;LITFLX = 1 ;LITC = 1 ;ITHC1 = 1
SELREF = T
RESFAC =1.0E-07
************************************************************
Group 16. Terminate Iterations
LITER(TEMP)=1000
ENDIT(TEMP)=1.0E-06
************************************************************
Group 17. Relaxation
RELAX(PRPS,LINRLX,1.)
RELAX(TEMP,LINRLX,1.)
OVRRLX =0.
EXPERT = F ;NNORSL = F
************************************************************
Group 18. Limits
VARMAX(PRPS)=1.0E+10 ;VARMIN(PRPS)=-1.0E+10
VARMAX(TEMP)=1.0E+10 ;VARMIN(TEMP)=-1.0E+10
************************************************************
Group 19. Data transmitted to GROUND
PARSOL = F
ISG62 = 1
SPEDAT(SET,MATERIAL,199,L,T)
************************************************************
Group 20. Preliminary Printout
************************************************************
Group 21. Print-out of Variables
INIFLD = F ;SUBWGR = F
* Y in OUTPUT argument list denotes:
* 1-field 2-correction-eq. monitor 3-selective dumping
* 4-whole-field residual 5-spot-value table 6-residual table
OUTPUT(PRPS,Y,N,Y,N,N,N)
OUTPUT(TEMP,Y,N,N,N,N,N)
************************************************************
Group 22. Monitor Print-Out
IXMON = 11 ;IYMON = 11 ;IZMON = 11
NPRMON = 100000 ;NPRMNT = 1 ;TSTSWP = 1
UWATCH = T ;USTEER = T
HIGHLO = F
************************************************************
Group 23.Field Print-Out & Plot Control
NPRINT = 1 ;NUMCLS = 5
NXPRIN = 10 ;IXPRF = 1 ;IXPRL = 10000
NYPRIN = 10 ;IYPRF = 1 ;IYPRL = 10000
NZPRIN = 1 ;IZPRF = 1 ;IZPRL = 10000
XZPR = F ;YZPR = T
IPLTF = 1 ;IPLTL = -1 ;NPLT = -1
ISWPRF = 1 ;ISWPRL = 100000
ITABL = 3 ;IPROF = 1
ABSIZ =0.5 ;ORSIZ =0.4
NTZPRF = 1 ;NCOLPF = 50
ICHR = 2 ;NCOLCO = 45 ;NROWCO = 20
No PATCHes yet used for this Group
************************************************************
Group 24. Dumps For Restarts
SAVE = T ;NOWIPE = F
NSAVE =CHAM
STOP
```