TALK=T;RUN(1,1)
DISPLAY
This run illustrates what happens when a fluid enters a duct
between two plane walls which are held at unequal temperatures.
Interesting parametric variations include: entry values of the
scalar variables; an additional boundary condition at the entry
section which would give the central region of the stream
a different set of values of the scalars; change to a flux
boundary  condition on one of the walls; and the introduction of
temperature- dependent transport properties.
/    /|
Wall     /    / |
at temp---/    /  |
T1     /    /   |
/    /    |
|    |Wall |
Fixed     | ^  |at   |
mass,     |/   |temp |
momentum, /    |T2   |
enthalpy /| ^  |    /
and conc- |/   |   / ^
entration /    |  / /z
fluxes   /| ^  | / /
|/   |/ /
x--->
ENDDIS
************************************************************
Group 1. Run Title and Number
************************************************************
************************************************************

TEXT(2DXZ Duct Flow; Effect Of Pr No. USP Tes)

************************************************************
************************************************************

IRUNN = 1 ;LIBREF = 14
************************************************************
Group 2. Time dependence
************************************************************
Group 3. X-Direction Grid Spacing
CARTES = T
NX = 10
XULAST =1.0E-02
XFRAC(1)=0.1 ;XFRAC(4)=0.4
XFRAC(7)=0.7 ;XFRAC(10)=1.
************************************************************
Group 4. Y-Direction Grid Spacing
NY = 1
YVLAST =1.
YFRAC(1)=1.
************************************************************
Group 5. Z-Direction Grid Spacing
PARAB = F
NZ = 20
ZWLAST =1.
ZFRAC(1)=0.05 ;ZFRAC(11)=0.55
************************************************************
Group 6. Body-Fitted Coordinates
************************************************************
Group 7. Variables: STOREd,SOLVEd,NAMEd
ONEPHS = T
NAME(1)=P1 ;NAME(3)=U1
NAME(7)=W1 ;NAME(16)=C1
NAME(17)=C2 ;NAME(18)=C3
* Y in SOLUTN argument list denotes:
* 1-stored 2-solved 3-whole-field
* 4-point-by-point 5-explicit 6-harmonic averaging
SOLUTN(P1,Y,Y,N,N,N,Y)
SOLUTN(U1,Y,Y,N,N,N,Y)
SOLUTN(W1,Y,Y,N,N,N,Y)
SOLUTN(C1,Y,Y,N,N,N,Y)
SOLUTN(C2,Y,Y,N,N,N,Y)
SOLUTN(C3,Y,Y,N,N,N,Y)
DEN1 = 1
************************************************************
Group 8. Terms & Devices
* Y in TERMS argument list denotes:
* 1-built-in source 2-convection 3-diffusion 4-transient
* 5-first phase variable 6-interphase transport
TERMS(P1,Y,Y,Y,N,Y,Y)
TERMS(U1,Y,Y,Y,Y,Y,Y)
TERMS(W1,Y,Y,Y,Y,Y,Y)
TERMS(C1,N,Y,Y,Y,Y,Y)
TERMS(C2,N,Y,Y,Y,N,Y)
TERMS(C3,N,Y,Y,Y,Y,Y)
DIFCUT =0.5 ;ZDIFAC =1.
GALA = F ;ADDDIF = F
ISOLX = -1 ;ISOLY = -1 ;ISOLZ = -1
USP = T ; USPDBG= F
UTCPLT = T ; USPIMB= F
UAUTO = F ; UGTGRD= F
USPVTK = T ; USPTER= F
USCANX = T ; USCANY= T
USCANZ = T
MXLEV = 0 ;MYLEV = 0 ;MZLEV = 0
DOMAT = -1
CELLST = 10 ; FACEST= 10
MINPRP = -1 ; MAXPRP= 250
UMXLEV = 1 ; UMXCLS= 10000
UNOLAY = 2 ; UIOLEV= 1
UWALEV = 1 ; UGRITR= 2
UMXCRS = 16
USPREL =0.75 ; UMNCEL=1.
UDVREL =1.
************************************************************
Group 9. Properties used if PRPS is not
stored, and where PRPS = -1.0 if it is!
RHO1 =1. ;TMP1 =0.
EL1 =0.
TSURR =0. ;TEMP0 =0.
PRESS0 =0.
DVO1DT =0. ;DRH1DP =0.
EMISS =0. ;SCATT =0.
ENUL =1.0E-03 ;ENUT =0.
PRNDTL(U1)=1. ;PRNDTL(W1)=1.
PRNDTL(C1)=1. ;PRNDTL(C2)=0.1
PRNDTL(C3)=10.
PRT(U1)=1. ;PRT(W1)=1.
PRT(C1)=1. ;PRT(C2)=1.
PRT(C3)=1.
CP1 =1. ;CP2 =1.
************************************************************
Group 10.Inter-Phase Transfer Processes
************************************************************
Group 11.Initial field variables (PHIs)
FIINIT(P1)=1.0E-10 ;FIINIT(U1)=1.0E-10
FIINIT(W1)=1.0E-10 ;FIINIT(C1)=1.0E-10
FIINIT(C2)=1.0E-10 ;FIINIT(C3)=1.0E-10
No PATCHes yet used for this Group
FSWEEP = 1
NAMFI =CHAM
************************************************************
Group 12. Patchwise adjustment of terms
Patches for this group are printed with those
for Group 13.
Their names begin either with GP12 or &
************************************************************
Group 13. Boundary & Special Sources

PATCH(WESTWALL,WWALL , 1, 1, 1, 1, 1, 20, 1, 1)
COVAL(WESTWALL,W1 ,1. ,0. )
COVAL(WESTWALL,C1 ,1. ,0. )
COVAL(WESTWALL,C2 ,10. ,0. )
COVAL(WESTWALL,C3 ,0.1 ,0. )

PATCH(EASTWALL,EWALL , 10, 10, 1, 1, 1, 20, 1, 1)
COVAL(EASTWALL,W1 ,1. ,0. )
COVAL(EASTWALL,C1 ,1. ,1. )
COVAL(EASTWALL,C2 ,10. ,1. )
COVAL(EASTWALL,C3 ,0.1 ,1. )

PATCH(OUT ,HIGH , 1, 10, 1, 1, 20, 20, 1, 1)
COVAL(OUT ,P1 ,1000. ,0. )

PATCH(IN ,LOW , 1, 10, 1, 1, 1, 1, 1, 1)
COVAL(IN ,P1 , FIXFLU ,10. )
COVAL(IN ,W1 ,0. ,10. )
COVAL(IN ,C1 ,1. ,0.5 )
COVAL(IN ,C2 ,1. ,0.5 )
COVAL(IN ,C3 ,1. ,0.5 )
XCYCLE = F
EGWF = T
WALLCO = GRND2
************************************************************
Group 14. Downstream Pressure For PARAB
************************************************************
Group 15. Terminate Sweeps
LSWEEP = 200 ;ISWC1 = 1
LITHYD = 1 ;LITFLX = 1 ;LITC = 1 ;ITHC1 = 1
SELREF = T
RESFAC =1.0E-06
************************************************************
Group 16. Terminate Iterations
LITER(P1)=20 ;LITER(U1)=10
LITER(W1)=10 ;LITER(C1)=20
LITER(C2)=20 ;LITER(C3)=20
ENDIT(P1)=1.0E-03 ;ENDIT(U1)=1.0E-03
ENDIT(W1)=1.0E-03 ;ENDIT(C1)=1.0E-03
ENDIT(C2)=1.0E-03 ;ENDIT(C3)=1.0E-03
************************************************************
Group 17. Relaxation
RELAX(P1,LINRLX,1.)
RELAX(U1,FALSDT,1.)
RELAX(W1,FALSDT,1.)
RELAX(C1,FALSDT,1.0E+09)
RELAX(C2,FALSDT,1.0E+09)
RELAX(C3,FALSDT,1.0E+09)
OVRRLX =0.
EXPERT = F ;NNORSL = F
************************************************************
Group 18. Limits
VARMAX(P1)=1.0E+10 ;VARMIN(P1)=-1.0E+10
VARMAX(U1)=1.0E+06 ;VARMIN(U1)=-1.0E+06
VARMAX(W1)=1.0E+06 ;VARMIN(W1)=-1.0E+06
VARMAX(C1)=1.0E+10 ;VARMIN(C1)=-1.0E+10
VARMAX(C2)=1.0E+10 ;VARMIN(C2)=-1.0E+10
VARMAX(C3)=1.0E+10 ;VARMIN(C3)=-1.0E+10
************************************************************
Group 19. Data transmitted to GROUND
PARSOL = F
ISG62 = 1
************************************************************
Group 20. Preliminary Printout
************************************************************
Group 21. Print-out of Variables
INIFLD = F ;SUBWGR = F
* Y in OUTPUT argument list denotes:
* 1-field 2-correction-eq. monitor 3-selective dumping
* 4-whole-field residual 5-spot-value table 6-residual table
OUTPUT(P1,Y,N,Y,Y,Y,Y)
OUTPUT(U1,Y,N,Y,Y,Y,Y)
OUTPUT(W1,Y,N,Y,Y,Y,Y)
OUTPUT(C1,Y,N,Y,Y,Y,Y)
OUTPUT(C2,Y,N,Y,Y,Y,Y)
OUTPUT(C3,Y,N,Y,Y,Y,Y)
************************************************************
Group 22. Monitor Print-Out
IXMON = 18 ;IYMON = 1 ;IZMON = 1
NPRMON = 100000 ;NPRMNT = 1 ;TSTSWP = 1
UWATCH = T ;USTEER = T
HIGHLO = F
************************************************************
Group 23.Field Print-Out & Plot Control
NPRINT = 100000 ;NUMCLS = 5
NXPRIN = 3 ;IXPRF = 1 ;IXPRL = 10000
NZPRIN = 10 ;IZPRF = 1 ;IZPRL = 10000
XZPR = F ;YZPR = F
IPLTF = 1 ;IPLTL = -1 ;NPLT = -1
ISWPRF = 1 ;ISWPRL = 100000
ITABL = 3 ;IPROF = 1
ABSIZ =0.5 ;ORSIZ =0.4
NTZPRF = 1 ;NCOLPF = 50
ICHR = 2 ;NCOLCO = 45 ;NROWCO = 20
No PATCHes yet used for this Group
************************************************************
Group 24. Dumps For Restarts
SAVE = T ;NOWIPE = F
NSAVE =CHAM
STOP