TALK=T;RUN( 1, 1)
************************************************************
Q1 created by VDI menu, Version 3.5, Date 31/05/02
CPVNAM=VDI;SPPNAM=HOTBOX
************************************************************
Echo DISPLAY / USE settings
DISPLAY
Library case H104:
SYSTEM CURVE CALCULATIONS
This case is simple three-dimensional forced flow through
a box. The model simulates fan induced flow around a PCB
with two chips dissipating heat. LVEL turbulence model,
specially designed for the types of flows encountered in
electronics equipment is employed. Another special feature
of HotBox, calculation of a system curve is active. At the
end of the run use both PHOTON and AUTOPLOT (if available)
to see results. AUTOPLOT will plot data from the HOTDAT
file showing convergence and converged points on the
system curve.
(Use PHOTON to display results. Enter USE Q1 in PHOTON
command mode, or create a file called U, which contains
the one line: USE Q1 before typing RUNPHO.)
ENDDIS
AUTOPLOT USE
file
hotdat 2
cl
da 1 iswp flrt
plot
msg
msg
msg X axis - Sweep Number, Y axis - System Flow rate
msg Press return to plot system pressure drop
pause
cl
da 1 ISWP SDP
PLOT
msg
msg
msg X axis - Sweep Number, Y axis - System Pressure Drop
msg Press return to plot system curve
pause
cl
da 1 flrt sdp
blb2
msg
msg
msg X axis - System Flow rate, Y axis - System Pressure Drop
msg Type E to end
ENDUSE
PHOTON USE
p;;;;
use patgeo
msg Geometry of the problem
msg
use hotspot
msg Press return to plot temperature contours
pause
cont tem1 y 6 fil;.001
msg
msg Press return to plot velocity field
pause
vec z 1 sh
vec x 5 sh
msg
msg Type E to end
ENDUSE
************************************************************
IRUNN = 1 ;LIBREF = 104
************************************************************
Group 1. Run Title
TEXT(System curve calculation: H104 )
************************************************************
Group 2. Transience
STEADY = T
************************************************************
Groups 3, 4, 5 Grid Information
* Overall number of cells, RSET(M,NX,NY,NZ,tolerance)
RSET(M,10,10,10)
************************************************************
Group 6. Body-Fitted coordinates
************************************************************
Group 7. Variables: STOREd,SOLVEd,NAMEd
ONEPHS = T
* Non-default variable names
NAME( 46) =NPOR ; NAME( 47) =BLOK
NAME( 48) =PRPS ; NAME( 49) =DEN1
NAME( 50) =TEM1 ; NAME(150) =WDIS
* Solved variables list
SOLVE(P1 ,U1 ,V1 ,W1 ,TEM1)
* Stored variables list
STORE(WDIS,DEN1,PRPS,BLOK,NPOR)
* Additional solver options
SOLUTN(P1 ,Y,Y,Y,N,N,N)
SOLUTN(TEM1,Y,Y,Y,N,N,Y)
IVARBK = -1 ;ISOLBK = 1
TURMOD(LVEL)
************************************************************
Group 8. Terms & Devices
ISOLX = 0 ;ISOLY = 0 ;ISOLZ = 0
************************************************************
Group 9. Properties
PRESS0 = 1.000000E+05 ;TEMP0 = 2.730000E+02
SETPRPS(1, 2)
DRH1DP = GRND5
DVO1DT = 3.330000E-03
PRNDTL(TEM1) = -2.630000E-02
EMISS = 0.000000E+00 ;SCATT = 0.000000E+00
************************************************************
Group 10.Inter-Phase Transfer Processes
************************************************************
Group 11.Initialise Var/Porosity Fields
FIINIT(NPOR) = 1.000000E+00 ;FIINIT(BLOK) = 1.000000E+00
FIINIT(PRPS) = -1.000000E+00 ;FIINIT(DEN1) = 1.001000E-10
FIINIT(TEM1) = 2.000000E+01 ;FIINIT(LTLS) = 1.001000E-10
FIINIT(WDIS) = 5.000000E-02
No PATCHes used for this Group
INIADD = F
************************************************************
Group 12. Convection and diffusion adjustments
No PATCHes used for this Group
************************************************************
Group 13. Boundary & Special Sources
PATCH (BUOYANCY,PHASEM,0,0,0,0,0,0,1,1)
COVAL (BUOYANCY,U1 , FIXFLU , GRND2 )
COVAL (BUOYANCY,V1 , FIXFLU , GRND2 )
COVAL (BUOYANCY,W1 , FIXFLU , GRND2 )
BUOYA = 0.000000E+00 ; BUOYB =-9.810000E+00
BUOYC = 0.000000E+00
BUOYD = 1.189000E+00
BUOYE = 2.000000E+01
EGWF = T
************************************************************
Group 14. Downstream Pressure For PARAB
************************************************************
Group 15. Terminate Sweeps
LSWEEP = 150
RESFAC = 1.000000E-03
************************************************************
Group 16. Terminate Iterations
LITER (TEM1) = 15
************************************************************
Group 17. Relaxation
RELAX(P1 ,LINRLX, 1.000000E+00)
RELAX(U1 ,FALSDT, 7.000000E-01)
RELAX(V1 ,FALSDT, 7.000000E-01)
RELAX(W1 ,FALSDT, 7.000000E-01)
RELAX(TEM1,FALSDT, 7.000000E+03)
************************************************************
Group 18. Limits
VARMAX(U1 ) = 1.000000E+06 ;VARMIN(U1 ) =-1.000000E+06
VARMAX(V1 ) = 1.000000E+06 ;VARMIN(V1 ) =-1.000000E+06
VARMAX(W1 ) = 1.000000E+06 ;VARMIN(W1 ) =-1.000000E+06
************************************************************
Group 19. EARTH Calls To GROUND Station
USEGRD = T ;USEGRX = T
NAMGRD =HTBX
ASAP = T
LG( 9) = T
************************************************************
Group 20. Preliminary Printout
ECHO = T
************************************************************
Group 21. Print-out of Variables
OUTPUT(BLOK,N,N,N,N,N,N)
OUTPUT(PRPS,N,N,N,N,N,N)
OUTPUT(WDIS,Y,N,N,N,N,N)
************************************************************
Group 22. Monitor Print-Out
IXMON = 5 ;IYMON = 7 ;IZMON = 4
NPRMON = 100000
NPRMNT = 1
TSTSWP = -1
************************************************************
Group 23.Field Print-Out & Plot Control
NPRINT = 100000
NPLT = 1
ISWPRF = 1 ;ISWPRL = 100000
ITABL = 3
No PATCHes used for this Group
************************************************************
Group 24. Dumps For Restarts
GVIEW(P,5.773503E-01,5.773503E-01,5.773503E-01)
GVIEW(UP,-4.082483E-01,8.164966E-01,-4.082483E-01)
> DOM, SIZE, 5.000000E-01, 7.000000E-01, 5.000000E-01
> DOM, MONIT, 2.250000E-01, 4.025000E-01, 1.675000E-01
> DOM, SCALE, 1.000000E+00, 1.000000E+00, 1.000000E+00
> DOM, SNAPSIZE, 1.000000E-02
> GRID, RSET_X_1, 2, 1.000000E+00
> GRID, RSET_X_2, 1, 1.000000E+00
> GRID, RSET_X_3, 1, 1.000000E+00
> GRID, RSET_X_4, 2, 1.000000E+00
> GRID, RSET_X_5, 1, 1.000000E+00
> GRID, RSET_X_6, 1, 1.000000E+00
> GRID, RSET_X_7, 2, 1.000000E+00
> GRID, RSET_Y_1, 3, 1.000000E+00
> GRID, RSET_Y_2, 2, 1.000000E+00
> GRID, RSET_Y_3, 1, 1.000000E+00
> GRID, RSET_Y_4, 2, 1.000000E+00
> GRID, RSET_Y_5, 2, 1.000000E+00
> GRID, RSET_Z_1, 2, 1.000000E+00
> GRID, RSET_Z_2, 1, 1.000000E+00
> GRID, RSET_Z_3, 2, 1.000000E+00
> GRID, RSET_Z_4, 2, 1.000000E+00
> GRID, RSET_Z_5, 1, 1.000000E+00
> GRID, RSET_Z_6, 2, 1.000000E+00
> DOM, SYS-CURVE, T
> DOM, SYS-POINTS, 5
> DOM, FLMIN, 1.000000E+01
> DOM, FLMAX , 9.000000E+01
> OBJ, NAME, PCB
> OBJ, POSITION, 9.999999E-02, 3.500000E-01, 9.999999E-02
> OBJ, SIZE, 3.000000E-01, 0.000000E+00, 3.000000E-01
> OBJ, CLIPART, cube11
> OBJ, ROTATION24, 1
> OBJ, TYPE, PLATE
> OBJ, POROSITY, 0.000000E+00
> OBJ, SIDE, BOTH
> OBJ, NAME, CHIP1
> OBJ, POSITION, 1.500000E-01, 3.500000E-01, 1.500000E-01
> OBJ, SIZE, 4.999998E-02, 2.000001E-02, 6.999999E-02
> OBJ, CLIPART, cube4
> OBJ, ROTATION24, 1
> OBJ, TYPE, BLOCKAGE
> OBJ, MATERIAL, 100
> OBJ, HEAT_FLVX, 0.000000E+00, 7.143000E+04
> OBJ, INI_BLOK, 2.000000E+00
> OBJ, NAME, CHIP2
> OBJ, POSITION, 3.000000E-01, 3.500000E-01, 1.500000E-01
> OBJ, SIZE, 5.000001E-02, 2.000001E-02, 6.999999E-02
> OBJ, CLIPART, cube4
> OBJ, ROTATION24, 1
> OBJ, TYPE, BLOCKAGE
> OBJ, MATERIAL, 100
> OBJ, HEAT_FLVX, 0.000000E+00, 1.000000E+05
> OBJ, INI_BLOK, 3.000000E+00
> OBJ, NAME, VENT
> OBJ, POSITION, 9.999999E-02, 7.000000E-01, 1.500000E-01
> OBJ, SIZE, 3.000000E-01, 0.000000E+00, 2.000000E-01
> OBJ, CLIPART, cube12t
> OBJ, ROTATION24, 1
> OBJ, TYPE, APERTURE
> OBJ, PRESSURE, 0.000000E+00
> OBJ, TEMPERATURE, 2.000000E+01
> OBJ, COEFFICIENT, 1.000000E+00
> OBJ, NAME, FAN
> OBJ, POSITION, 1.500000E-01, 2.000000E-01, 0.000000E+00
> OBJ, SIZE, 2.000000E-01, 3.000000E-01, 0.000000E+00
> OBJ, CLIPART, cube2t
> OBJ, ROTATION24, 1
> OBJ, TYPE, FAN
> OBJ, VELOCITY, 0.000000E+00, 0.000000E+00, 1.000000E+00
> OBJ, TEMPERATURE, 2.000000E+01
> OBJ, PRESSURE, 0.000000E+00
STOP