TALK=T;RUN( 1, 1)
************************************************************
Q1 created by VDI menu, Version 3.6, Date 12/09/05
CPVNAM=VDI;SPPNAM=Core
Echo DISPLAY / USE settings
DISPLAY
This one-dimensional heat conduction problem tests
the correctness of NEWPARSOL solver which gives correct
result at one iteration.
The domain is XLENG [m] long in y; object BLOCK is on the right
side of the domain. The domain material is air, the object
is steel.
The object does not fit the grid.
k1 k2
|-------!---|---!-------|
| ! |///!///////|
| 1 ! 2 |///!///3///|
| ! |///!///////|
|-------!---|---!-------|
y=0 y1=1.5 y2=YLENG
This case containts several tasks selected by CASENO.
CASENO=1 - set tem1 0 and flux=1 at west and east boundaries.
CASENO=2 - fix zero values in left and right,
set volume source 1 at sunny sub-cell.
CASENO=3 - fix zero values in left and right,
set volume source 1 at dark sub-cell.
CASENO=4 - fix zero values in left and right,
set volume source 1 at sunny and dark sub-cells.
CASENO=5 - set value 0 at south and north boundaries,
fix value at sunny sub-cell.
CASENO=6 - set value 0 at south and north boundaries,
fix value at dark sub-cell.
CASENO=7 - set value 0 at south and north boundaries,
fix value at sunny and dark sub-cell.
CASENO=8 - unsteady, fix zero values in left and right,
initial value 1.
CASENO=9 - set tem1 0 and 1 at south and north boundaries,
set volume source 1 at sunny sub-cell.
CASENO=10- set tem1 0 and 1 at south and north boundaries,
set volume source 1 at dark sub-cell.
CASENO=11- set tem1 0 and 1 at south and north boundaries,
set volume source 1 at sunny dark sub-cell.
ENDDIS
************************************************************
IRUNN = 1 ;LIBREF = 704
************************************************************
INTEGER(CASENO)
mesg(CASENO=1 - set tem1 0 and flux=1 at west and east boundaries.
mesg(CASENO=2 - fix zero values in left and right,
mesg( set volume source 1 at sunny sub-cell.
mesg(CASENO=3 - fix zero values in left and right,
mesg( set volume source 1 at dark sub-cell.
mesg(CASENO=4 - fix zero values in left and right,
mesg( set volume source 1 at sunny and dark sub-cells.
mesg(CASENO=5 - fix zero values in left and right,
mesg( fix value at sunny sub-cell.
mesg(CASENO=6 - fix zero values in left and right,
mesg( fix value at dark sub-cell.
mesg(CASENO=7 - fix zero values in left and right,
mesg( fix value at sunny and dark sub-cell.
mesg(CASENO=8 - unsteady, fix zero values in left and right,
mesg( initial value 1.
mesg(CASENO=9 - set tem1 0 and 1 at south and north boundaries,
mesg( set volume source 1 at sunny sub-cell.
mesg(CASENO=10- set tem1 0 and 1 at south and north boundaries,
mesg( set volume source 1 at dark sub-cell.
mesg(CASENO=11- set tem1 0 and 1 at south and north boundaries,
mesg( set volume source 1 at sunny dark sub-cell.
CASENO=1
mesg(caseno=:caseno: ok? If not, insert required value
readvdu(caseno,int,:caseno:)
caseno
INTEGER(NCEL,ICUT)
NCEL=3
mesg(number of cells is :ncel: OK? If not, set other UNEVEN number
readvdu(ncel,int,:ncel:)
ncel
ICUT=NCEL/2+1 ! Currect number of cut-cell
REAL(TIMELAST);TIMELAST=1000. ! time, seconds
REAL(TIMESTEP);TIMESTEP=1. ! last time step
REAL(Y1,Y2,YLENG,YHALF,Y4,K1,K2)
YLENG=3. ! y size of domain
Y1=0.5*YLENG ! y position of middle
Y2=YLENG
YHALF=0.5*YLENG/NCEL ! Half size of cell
Y4=0.5*YHALF
REAL(DEL);DEL=1.5*YHALF
K1=0.0258
k2=43.
REAL(FLX); FLX=1.0 ! flux at boundary ix=nx
REAL(LINK); LINK=1./(.5*YHALF/K1+.5*YHALF/K2)
REAL(TEM0);TEM0=0.0
INTEGER(NUMMAT);NUMMAT=111
REAL(SOURC,SSOURC,DSOURC); sourc=1.0 ! source value
ssourc=sourc*yhalf; dsourc=sourc*yhalf ! source value in sub-cells
REAL(SVAL,DVAL);SVAL=1.;DVAL=1.
IF(CASENO.EQ.5) THEN
+ SVAL=ssourc/(K1/DEL+LINK)/(1-LINK*LINK/(K1/DEL+LINK)/(K2/DEL+LINK))
+ DVAL=LINK*ssourc/((K1/DEL+LINK)*(K2/DEL+LINK)-LINK*LINK)
ENDIF
IF(CASENO.EQ.6) THEN
+ SVAL=dsourc/LINK/((K1/DEL/LINK+1)*(K2/DEL/LINK+1)-1)
+ DVAL=(K1/DEL/LINK+1)*dsourc/LINK/((K1/DEL/LINK+1)*(K2/DEL/LINK+1)-1)
ENDIF
IF(CASENO.EQ.7) THEN
+ SVAL=(ssourc*(K2/DEL+LINK)+dsourc*LINK)/((K1/DEL+LINK)$
*(K2/DEL+LINK)-LINK*LINK)
+ DVAL=(dsourc*(K1/DEL+LINK)+ssourc*LINK)/((K1/DEL+LINK)$
*(K2/DEL+LINK)-LINK*LINK)
ENDIF
REAL(T0OB);T0OB=TEM0 ! Initial value of dark part of sub-cell
IF(CASENO.EQ.8) THEN
+ T0OB=1.0
real(at,ct,f0,g0,scof,dcof)
f0=t0ob; g0=t0ob ! initial values at sunny and dark sub-cells
at=1.189*1005*yhalf/(timelast-tfirst)/timestep ! rho+s*cp_s*vol/del_time
ct=7800*473*yhalf/(timelast-tfirst)/timestep ! rho_d*cp_d*vol/del_time
real(delt);delt=(tlast-tfirst)/lstep
scof=k1/del+link+at
dcof=k2/del+link+ct
+ SVAL=(at*f0*dcof+ct*g0*link)/(scof*dcof-link*link)
+ DVAL=(ct*g0*scof+at*f0*link)/(scof*dcof-link*link)
ENDIF
Group 1. Run Title
TEXT(NEWPARSOL, 1D heat-conduction in y dir
************************************************************
Group 2. Transience
STEADY = T
IF(CASENO.EQ.8) THEN
+ STEADY=F
ENDIF
* Set overall time and no. of steps
RSET(U,0.000000E+00,TIMELAST,TIMESTEP)
************************************************************
Groups 3, 4, 5 Grid Information
* Overall number of cells, RSET(M,NX,NY,NZ,tolerance)
RSET(M,1,NCEL,1)
************************************************************
Group 6. Body-Fitted coordinates
************************************************************
Group 7. Variables: STOREd,SOLVEd,NAMEd
ONEPHS = T
* Non-default variable names
NAME(148) =TEM1 ; NAME(150) =PRPS
* Solved variables list
SOLVE(TEM1)
* Stored variables list
STORE(PRPS,KOND)
STORE(DVAR,DRES,DCOR) ! newparsol solution at dark
STORE(RST1,CRT1,APT1,AET1,AWT1)
STORE(S_EX,D_EX) ! exact solution at sunny and dark
STORE(SE/S,DE/D) ! exact/newparsol_solution for sunny and dark
* Additional solver options
SOLUTN(TEM1,Y,Y,Y,N,N,Y)
inform7begin
(stored var rst1 is resi(tem1))
(stored var crt1 is corr(tem1))
(stored var apt1 is apco(tem1))
(stored var aet1 is aeco(tem1))
(stored var awt1 is awco(tem1))
if(caseno.eq.1) then
(stored s_ex is yg*flx/k1 with if(yg<=y1))
(stored s_ex is (yg-y1)*flx/k2+flx*y1/k1 with if(yg>y1))
patch(sunycell,cell,1,nx,icut,icut,1,nz,1,1)
(stored s_ex at sunycell is .5*(y1+yv[,-1])*flx/k1) ! sunny part of cut-cell
(stored d_ex at sunycell is yhalf*flx/k2+flx*y1/k1) ! dark part of cut-cell
endif
if(caseno.eq.2) then
(stored s_ex is ssourc/(K1/DEL+LINK)/(1.-LINK*LINK/(K1/DEL+LINK)/$
(K2/DEL+LINK)) with if(iy=icut))
(stored d_ex is LINK*ssourc/((K1/DEL+LINK)*(K2/DEL+LINK)-LINK*LIN$
K) with if(iy=icut))
endif
if(caseno.eq.3) then
(stored s_ex is dsourc/LINK/((K1/DEL/LINK+1)*(K2/DEL/LINK+1)-1.) $
with if(iy=icut))
(stored d_ex is (K1/DEL/LINK+1)*dsourc/LINK/((K1/DEL/LINK+1)*(K2/$
DEL/LINK+1)-1.) with if(iy=icut))
endif
if(caseno.eq.4) then
(stored s_ex is (ssourc*(K2/DEL+LINK)+dsourc*LINK)/((K1/DEL+LINK)$
*(K2/DEL+LINK)-LINK*LINK) with if(iy=icut))
(stored d_ex is (dsourc*(K1/DEL+LINK)+ssourc*LINK)/((K1/DEL+LINK)$
*(K2/DEL+LINK)-LINK*LINK) with if(iy=icut))
endif
if(caseno.eq.5) then
(stored s_ex is sval with if(iy=icut))
(stored d_ex is dval with if(iy=icut))
endif
if(caseno.eq.6) then
(stored s_ex is sval with if(iy=icut))
(stored d_ex is dval with if(iy=icut))
endif
if(caseno.eq.7) then
(stored s_ex is sval with if(iy=icut))
(stored d_ex is dval with if(iy=icut))
endif
if(caseno.eq.8) then
(stored s_ex is sval with if(iy=icut))
(stored d_ex is dval with if(iy=icut))
endif
if(caseno.ge.9.and.caseno.le.11) then
+ if(caseno.eq.9) then
+ dsourc=0.
+ endif
+ if(caseno.eq.10) then
+ ssourc=0.
+ endif
real(scut,dcut)
scut=ssourc+link*(dsourc+k2/(y1-y4))/(link+k2/(y1-y4))
scut=scut/(link+k1/(y1-y4)-link*link/(link+k2/(y1-y4)))
dcut=(scut*link+dsourc+k2/(y1-y4))/(link+k2/(y1-y4))
(stored d_ex is dcut with if(iy=icut))
flx=scut*k1/(y1-y4)
(stored s_ex is flx*yg/k1 with if(yg<=y1))
flx=(dcut-1.)*k2/(y1-y4)
(stored s_ex is dcut-flx*(yg-y1-y4)/k2 with if(yg>y1))
endif
(stored var SE/S is s_ex/tem1 with if(tem1!=0.))
(stored var DE/D is d_ex/dvar with if(dvar!=0.))
inform7end
************************************************************
Group 8. Terms & Devices
************************************************************
Group 9. Properties
PRESS0 = 1.000000E+05 ;TEMP0 = 2.730000E+02
* Domain material is: 0 Air at 20 deg C, 1 atm, treated as i
SETPRPS(1, 0)
ENUT = 0.000000E+00
DVO1DT = 3.410000E-03
PRNDTL(TEM1) = -K1
************************************************************
Group 10.Inter-Phase Transfer Processes
************************************************************
Group 11.Initialise Var/Porosity Fields
FIINIT(PRPS) = -1.000000E+00
FIINIT(TEM1) = TEM0
FIINIT(DVAR) = -1.234E-11
FIINIT(DRES) = -1.234E-11
FIINIT(DCOR) = -1.234E-11
FIINIT(S_EX) = 0.; FIINIT(D_EX) = 0.
FIINIT(SE/S) = 0.; FIINIT(DE/D) = 0.
IF(CASENO.EQ.8) THEN
+ PATCH(INIT1,INIVAL,1,nx,icut,icut,1,nz,1,1)
+ COVAL(INIT1,TEM1, 1.000000E+00, T0OB)
ENDIF
INIADD = F
************************************************************
Group 12. Convection and diffusion adjustments
No PATCHes used for this Group
************************************************************
Group 13. Boundary & Special Sources
! Set values 0 and 1 at west and east boundaries
IF(CASENO.EQ.1) THEN
+ PATCH(SWAL ,SWALL ,1,nx,1,1,1,nz,1,1)
+ COVAL(SWAL ,TEM1, 1.000000E+00, 0.000000E+00)
+ PATCH(NFLUX ,NORTH ,1,nx,ny,ny,1,nz,1,1)
+ COVAL(NFLUX ,TEM1, FIXFLU, 1.000000E+00)
ENDIF
IF(CASENO.GT.1.AND.CASENO.LE.8) THEN ! Fix zero values in 1 and nx cells
+ PATCH(sfix ,VOLUME,1,nx,1,icut-1,1,nz,1,LSTEP)
+ COVAL(sfix ,TEM1, FIXval , 0.0)
+ PATCH(nfix ,VOLUME,1,nx,icut+1,ny,1,nz,1,LSTEP)
+ COVAL(nfix ,TEM1, FIXval , 0.0)
ENDIF
IF(CASENO.EQ.2.OR.CASENO.EQ.4) THEN ! Set source in sunny sub-cell
+ PATCH(SNYFLUX ,VOLUME,1,nx,icut,icut,1,nz,1,LSTEP)
+ COVAL(SNYFLUX ,TEM1, FIXFLU , SVAL)
ENDIF
IF(CASENO.EQ.5) THEN ! Fix value in sunny sub-cell
+ PATCH(SNYFLUX ,VOLUME,1,nx,icut,icut,1,nz,1,LSTEP)
+ COVAL(SNYFLUX ,TEM1, FIXVAL , SVAL)
ENDIF
IF(CASENO.EQ.7) THEN ! Fix value in sunny sub-cell
+ PATCH(SNYFLUX ,VOLUME,1,nx,icut,icut,1,nz,1,LSTEP)
+ COVAL(SNYFLUX ,TEM1, FIXVAL , SVAL)
ENDIF
IF(CASENO.GE.9.AND.CASENO.LE.11) THEN ! Set boundary conditions
+ PATCH(SWAL ,SWALL ,1,nx,1,1,1,nz,1,1)
+ COVAL(SWAL ,TEM1, 1.000000E+00, 0.000000E+00)
+ PATCH(NWAL ,NWALL ,1,nx,ny,ny,1,nz,1,1)
+ COVAL(NWAL ,TEM1, 1.000000E+00, 1.000000E+00)
ENDIF
IF(CASENO.EQ.9.OR.CASENO.EQ.11) THEN ! Set source in sunny sub-cell
+ PATCH(SNYFLUX ,VOLUME,1,nx,icut,icut,1,nz,1,LSTEP)
+ COVAL(SNYFLUX ,TEM1, FIXFLU , SVAL)
ENDIF
EGWF = T
************************************************************
Group 14. Downstream Pressure For PARAB
************************************************************
Group 15. Terminate Sweeps
LSWEEP = 1
RESFAC = 1.000000E-03
************************************************************
Group 16. Terminate Iterations
LITER (TEM1) = 1
IF(CASENO.EQ.3.OR.CASENO.EQ.6.OR.CASENO.EQ.7.OR.CASENO.EQ.8) THEN
+ LITER (TEM1) = 2
ENDIF
IF(CASENO.EQ.10.OR.CASENO.EQ.11) THEN
+ LITER (TEM1) = 2
ENDIF
IF(CASENO.EQ.4) THEN
+ LITER (TEM1) = 3
ENDIF
************************************************************
Group 17. Relaxation
relax(tem1,falsdt,1.E10)
************************************************************
Group 18. Limits
************************************************************
Group 19. EARTH Calls To GROUND Station
USEGRD = T ;USEGRX = T
ASAP = T
PARSOL = T
SPEDAT(SET,GXMONI,TRANSIENT,L,F)
************************************************************
Group 20. Preliminary Printout
ECHO = T
DISTIL = T ;NULLPR = F
NDST = 0
DSTTOL = 1.000000E-02
EX (TEM1) = 0.000000E+00 ;EX (PRPS) = 3.354000E+00
************************************************************
Group 21. Print-out of Variables
************************************************************
Group 22. Monitor Print-Out
IXMON = 1 ;IYMON = 1 ;IZMON = -3
NPRMON = 100000
NPRMNT = 1
TSTSWP = -1
************************************************************
Group 23.Field Print-Out & Plot Control
NPRINT = 100000
NTPRIN = 100 ;ISTPRF = 1 ;ISTPRL = 10000
NXPRIN = 1
ISWPRF = 1 ;ISWPRL = 100000
PATCH (PLOT ,PROFIL,1,NX,1,1,1,1,1,1)
PLOT(PLOT ,TEM1, 0.000000E+00, 0.000000E+00)
************************************************************
Group 24. Dumps For Restarts
GVIEW(P,0.000000E+00,0.000000E+00,1.000000E+00)
GVIEW(UP,0.000000E+00,1.000000E+00,0.000000E+00)
> DOM, SIZE, 1.000000E+00, Y2, 1.000000E+00
> DOM, MONIT, 1.000000E+00, Y1, 1.000000E+00
> DOM, SCALE, 1.000000E+00, 1.000000E+00, 1.000000E+00
> DOM, SNAPSIZE, 1.000000E-02
> GRID, RSET_X_1, 1, 1.000000E+00
> GRID, RSET_Y_1, NCEL, 1.000000E+00
> GRID, RSET_Z_1, 1, 1.000000E+00
> OBJ, NAME, BLOCK
> OBJ, POSITION, 0.000000E+00, Y1, 0.000000E+00
> OBJ, SIZE, 1.000000E+00, YHALF, 1.000000E+00
> OBJ, GEOMETRY, cube4
> OBJ, ROTATION24, 1
> OBJ, GRID, NO
> OBJ, TYPE, BLOCKAGE
> OBJ, MATERIAL, NUMMAT
> OBJ, TIME_LIMITS, ALWAYS_ACTIVE
> OBJ, INI_TEMP, T0OB
IF(CASENO.EQ.3.OR.CASENO.EQ.4) THEN
> OBJ, HEAT_FLVX, 0.000000E+00, DVAL
ENDIF
IF(CASENO.EQ.6.OR.CASENO.EQ.7) THEN
> OBJ, FIXED_TMP, 0.000000E+00, DVAL
ENDIF
IF(CASENO.EQ.10.OR.CASENO.EQ.11) THEN
> OBJ, HEAT_FLVX, 0.000000E+00, DVAL
ENDIF
> OBJ, NAME, BLOCK2
> OBJ, POSITION, 0.000000E+00, Y1+YHALF, 0.000000E+00
> OBJ, SIZE, 1.000000E+00, Y2-Y1-YHALF, 1.000000E+00
> OBJ, GEOMETRY, cube4
> OBJ, ROTATION24, 1
> OBJ, GRID, NO
> OBJ, TYPE, BLOCKAGE
> OBJ, MATERIAL, NUMMAT
> OBJ, TIME_LIMITS, ALWAYS_ACTIVE
> OBJ, INI_TEMP, 0.
PHOTON USE
AUTOPLOT USE
file
phi 5
d 1 tem1;d 1 dvar;Col1 1;Col2 2;blb4 1;blb2 2;Redr
text
1
1
Temperature in structured storage
0.9E+03 0.28E+04 CR
text
1
2
Temperature in dark sub-cells
0.9E+03 0.27E+04 CR
msg Press any key to END
pause
ENDUSE
STOP
isg60=1 ! set active NewParsol