How to convert an STL file into a PHOENICS-VR geometry file

If you have an STL file called MYGEOM.STL in your current directory, you need to type in the following commands to create a VR geometry:

COPY MYGEOM.STL \PHOENICS\D_INTFAC\D_CADPHO\STLDAT
CD \PHOENICS\D_INTFAC\D_CADPHO
RUN77 STLCHAM
COPY CHAMDAT \PHOENICS\D_SATELL\D_SPP\D_GEOM\D_NEW\MYGEOM.DAT

When you run VR Editor, you can find the geometry MYGEOM.DAT under subdirectory NEW.

You can find the position and size values of the geometry in the file MYGEOM.DAT.